source: ctrl/firmware/Main/CubeMX

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @79   6 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   6 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   7 months Zed LwIP was removed from the project.
(edit) @76   7 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   7 months Zed FatFs? is working, but without DMA.
(edit) @74   7 months Zed FatFs? with DMA were implemented.
(edit) @73   7 months Zed FreeRTOS can be compiled without errors.
(edit) @72   7 months Zed FreeRTOS was added to the project.
(edit) @71   7 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   7 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   7 months Zed NetX can be compiled and initialized.
(edit) @68   7 months Zed Fixing project before Ethernet implementation.
(edit) @67   7 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   7 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   7 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   7 months Zed USART3 TX DMA is working.
(edit) @63   7 months Zed Fixing project.
(edit) @62   7 months Zed GSM STATUS pin is working.
(edit) @61   7 months Zed GSM thread was added.
(edit) @60   7 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   7 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   8 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   8 months Zed FileX is working.
(edit) @56   8 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   8 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   8 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   8 months Zed
(edit) @52   8 months Zed
(edit) @51   8 months Zed SDMMC low level driver was added.
(edit) @50   8 months Zed LED control description were added.
(edit) @48   9 months Zed Backlight was turned on for Display.
(edit) @47   9 months Zed
(edit) @46   9 months Zed
(edit) @45   9 months Zed Added SPI module for Display.
(edit) @44   9 months Zed
(edit) @43   9 months Zed
(edit) @42   9 months Zed
(edit) @41   9 months Zed
(edit) @40   9 months Zed
(edit) @39   9 months Zed RTC module was activated.
(edit) @38   9 months Zed Instruction and Data caches were activated.
(edit) @37   9 months Zed
(edit) @36   9 months Zed
(edit) @35   9 months Zed
(edit) @34   9 months Zed
(edit) @33   9 months Zed
(edit) @32   9 months Zed
(edit) @31   9 months Zed
(edit) @30   9 months Zed
(edit) @29   9 months Zed
(edit) @28   9 months Zed
(edit) @27   9 months Zed
(edit) @26   9 months Zed
(edit) @25   9 months Zed
(edit) @24   9 months Zed
(edit) @23   9 months Zed
(edit) @22   9 months Zed
(edit) @21   9 months Zed
(edit) @20   9 months Zed
(edit) @19   9 months Zed
(edit) @18   9 months Zed
(edit) @17   9 months Zed
(edit) @16   9 months Zed
(edit) @14   9 months Zed
(edit) @13   9 months Zed Forgot to add to the project these files.
(edit) @11   9 months Zed
(edit) @10   9 months Zed Added SEGGER project files.
(edit) @9   9 months Zed
(copy) @8   9 months Zed Rearranged several folders.
copied from ctrl/firmware/Main/Cube:
(copy) @7   9 months f.jahn
Note: See TracRevisionLog for help on using the revision log.