source: ctrl/firmware/Main/CubeMX

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @62   20 months Zed GSM STATUS pin is working.
(edit) @61   20 months Zed GSM thread was added.
(edit) @60   20 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   20 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   21 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   21 months Zed FileX is working.
(edit) @56   21 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   21 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   21 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   21 months Zed
(edit) @52   21 months Zed
(edit) @51   21 months Zed SDMMC low level driver was added.
(edit) @50   21 months Zed LED control description were added.
(edit) @48   21 months Zed Backlight was turned on for Display.
(edit) @47   21 months Zed
(edit) @46   21 months Zed
(edit) @45   21 months Zed Added SPI module for Display.
(edit) @44   22 months Zed
(edit) @43   22 months Zed
(edit) @42   22 months Zed
(edit) @41   22 months Zed
(edit) @40   22 months Zed
(edit) @39   22 months Zed RTC module was activated.
(edit) @38   22 months Zed Instruction and Data caches were activated.
(edit) @37   22 months Zed
(edit) @36   22 months Zed
(edit) @35   22 months Zed
(edit) @34   22 months Zed
(edit) @33   22 months Zed
(edit) @32   22 months Zed
(edit) @31   22 months Zed
(edit) @30   22 months Zed
(edit) @29   22 months Zed
(edit) @28   22 months Zed
(edit) @27   22 months Zed
(edit) @26   22 months Zed
(edit) @25   22 months Zed
(edit) @24   22 months Zed
(edit) @23   22 months Zed
(edit) @22   22 months Zed
(edit) @21   22 months Zed
(edit) @20   22 months Zed
(edit) @19   22 months Zed
(edit) @18   22 months Zed
(edit) @17   22 months Zed
(edit) @16   22 months Zed
(edit) @14   22 months Zed
(edit) @13   22 months Zed Forgot to add to the project these files.
(edit) @11   22 months Zed
(edit) @10   22 months Zed Added SEGGER project files.
(edit) @9   22 months Zed
(copy) @8   22 months Zed Rearranged several folders.
copied from ctrl/firmware/Main/Cube
(copy) @7   22 months f.jahn
Note: See TracRevisionLog for help on using the revision log.