source:
ctrl/firmware/Main/CubeMX/Core/Src
| Name | Size | Rev | Age | Author | Last Change |
|---|---|---|---|---|---|
| ../ | |||||
| adc.c | 13.0 KB | 113 | 19 months | Added CAN bus support. | |
| bdma.c | 1.6 KB | 92 | 21 months | Fixing project before changing MPU settings in CubeMX. | |
| dac.c | 3.8 KB | 107 | 20 months | Everything works good. Fixing project. | |
| dma.c | 2.3 KB | 108 | 20 months | Fixing project. | |
| dts.c | 2.3 KB | 96 | 21 months | ADC3 with DMA was implemented. DTS was activated. | |
| fdcan.c | 4.1 KB | 114 | 18 months | Fixing the project. | |
| freertos.c | 9.4 KB | 109 | 20 months | Fixing project. | |
| gpio.c | 8.0 KB | 113 | 19 months | Added CAN bus support. | |
| i2c.c | 6.3 KB | 89 | 21 months | Added basic I2C EEPROM support. | |
| main.c | 11.7 KB | 113 | 19 months | Added CAN bus support. | |
| memorymap.c | 962 bytes | 47 | 23 months | ||
| rtc.c | 3.5 KB | 87 | 21 months | RTC is working. | |
| sdmmc.c | 3.8 KB | 108 | 20 months | Fixing project. | |
| spi.c | 9.7 KB | 108 | 20 months | Fixing project. | |
| stm32h7xx_hal_msp.c | 2.6 KB | 94 | 21 months | Fixing project. | |
| stm32h7xx_hal_timebase_tim.c | 4.1 KB | 110 | 20 months | Fixing project. | |
| stm32h7xx_it.c | 13.4 KB | 112 | 19 months | Fixing project. Need to add CAN in CubeMX. | |
| system_stm32h7xx.c | 19.5 KB | 11 | 2 years | ||
| tim.c | 13.2 KB | 114 | 18 months | Fixing the project. | |
| usart.c | 11.9 KB | 83 | 21 months | Modbus Master and Slave Hardware were tested. | |
Note:
See TracBrowser
for help on using the repository browser.
