source: ctrl/firmware

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @110   12 months Zed Fixing project.
(edit) @109   12 months Zed Fixing project.
(edit) @108   12 months Zed Fixing project.
(edit) @107   12 months Zed Everything works good. Fixing project.
(edit) @106   12 months Zed Fixing project.
(edit) @105   12 months Zed Fixing project.
(edit) @104   13 months Zed
(edit) @103   13 months Zed
(edit) @102   13 months Zed
(edit) @101   13 months Zed
(edit) @100   13 months Zed
(edit) @99   13 months Zed
(edit) @98   13 months Zed Charging PWM on TIM1 was implemented.
(edit) @97   13 months Zed DAC works.
(edit) @96   13 months Zed ADC3 with DMA was implemented. DTS was activated.
(edit) @95   13 months Zed Fixing project.
(edit) @94   13 months Zed Fixing project.
(edit) @93   13 months Zed Fixing project.
(edit) @92   13 months Zed Fixing project before changing MPU settings in CubeMX.
(edit) @91   13 months Zed ADC module was activated.
(edit) @90   13 months Zed Communication with M24256E EEPROM works.
(edit) @89   13 months Zed Added basic I2C EEPROM support.
(edit) @88   13 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @87   13 months Zed RTC is working.
(edit) @86   13 months Zed
(edit) @85   13 months Zed Fixing project before adding 1Wire port in CubeMX.
(edit) @84   13 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @83   13 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   13 months Zed DMA transfer to µSD-card was implemented.
(edit) @81   13 months Zed Modbus Master and Slave interfaces were added.
(edit) @80   13 months Zed Added main SYS_DATA structure.
(edit) @79   13 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   13 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   13 months Zed LwIP was removed from the project.
(edit) @76   13 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   13 months Zed FatFs is working, but without DMA.
(edit) @74   13 months Zed FatFs with DMA were implemented.
(edit) @73   13 months Zed FreeRTOS can be compiled without errors.
(edit) @72   13 months Zed FreeRTOS was added to the project.
(edit) @71   13 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   13 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   14 months Zed NetX can be compiled and initialized.
(edit) @68   14 months Zed Fixing project before Ethernet implementation.
(edit) @67   14 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   14 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   14 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   14 months Zed USART3 TX DMA is working.
(edit) @63   14 months Zed Fixing project.
(edit) @62   14 months Zed GSM STATUS pin is working.
(edit) @61   14 months Zed GSM thread was added.
(edit) @60   14 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   14 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   15 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   15 months Zed FileX is working.
(edit) @56   15 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   15 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   15 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   15 months Zed
(edit) @52   15 months Zed
(edit) @51   15 months Zed SDMMC low level driver was added.
(edit) @50   15 months Zed LED control description were added.
(edit) @48   15 months Zed Backlight was turned on for Display.
(edit) @47   15 months Zed
(edit) @46   15 months Zed
(edit) @45   15 months Zed Added SPI module for Display.
(edit) @44   15 months Zed
(edit) @43   15 months Zed
(edit) @42   15 months Zed
(edit) @41   15 months Zed
(edit) @40   15 months Zed
(edit) @39   15 months Zed RTC module was activated.
(edit) @38   15 months Zed Instruction and Data caches were activated.
(edit) @37   15 months Zed
(edit) @36   15 months Zed
(edit) @35   15 months Zed
(edit) @34   15 months Zed
(edit) @33   15 months Zed
(edit) @32   15 months Zed
(edit) @31   15 months Zed
(edit) @30   15 months Zed
(edit) @29   15 months Zed
(edit) @28   15 months Zed
(edit) @27   15 months Zed
(edit) @26   15 months Zed
(edit) @25   15 months Zed
(edit) @24   15 months Zed
(edit) @23   15 months Zed
(edit) @22   15 months Zed
(edit) @21   15 months Zed
(edit) @20   15 months Zed
(edit) @19   15 months Zed
(edit) @18   15 months Zed
(edit) @17   15 months Zed
(edit) @16   15 months Zed
(edit) @15   15 months Zed
(edit) @14   15 months Zed
(edit) @13   15 months Zed Forgot to add to the project these files.
(edit) @12   15 months Zed Added more files to the project.
(edit) @11   15 months Zed
(edit) @10   15 months Zed Added SEGGER project files.
Note: See TracRevisionLog for help on using the revision log.