source: ctrl/firmware

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @104   19 months Zed
(edit) @103   19 months Zed
(edit) @102   19 months Zed
(edit) @101   19 months Zed
(edit) @100   19 months Zed
(edit) @99   19 months Zed
(edit) @98   19 months Zed Charging PWM on TIM1 was implemented.
(edit) @97   19 months Zed DAC works.
(edit) @96   19 months Zed ADC3 with DMA was implemented. DTS was activated.
(edit) @95   19 months Zed Fixing project.
(edit) @94   19 months Zed Fixing project.
(edit) @93   19 months Zed Fixing project.
(edit) @92   19 months Zed Fixing project before changing MPU settings in CubeMX.
(edit) @91   19 months Zed ADC module was activated.
(edit) @90   19 months Zed Communication with M24256E EEPROM works.
(edit) @89   19 months Zed Added basic I2C EEPROM support.
(edit) @88   19 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @87   19 months Zed RTC is working.
(edit) @86   19 months Zed
(edit) @85   19 months Zed Fixing project before adding 1Wire port in CubeMX.
(edit) @84   19 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @83   19 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   19 months Zed DMA transfer to µSD-card was implemented.
(edit) @81   19 months Zed Modbus Master and Slave interfaces were added.
(edit) @80   19 months Zed Added main SYS_DATA structure.
(edit) @79   19 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   19 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   19 months Zed LwIP was removed from the project.
(edit) @76   20 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   20 months Zed FatFs is working, but without DMA.
(edit) @74   20 months Zed FatFs with DMA were implemented.
(edit) @73   20 months Zed FreeRTOS can be compiled without errors.
(edit) @72   20 months Zed FreeRTOS was added to the project.
(edit) @71   20 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   20 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   20 months Zed NetX can be compiled and initialized.
(edit) @68   20 months Zed Fixing project before Ethernet implementation.
(edit) @67   20 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   20 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   20 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   20 months Zed USART3 TX DMA is working.
(edit) @63   20 months Zed Fixing project.
(edit) @62   20 months Zed GSM STATUS pin is working.
(edit) @61   20 months Zed GSM thread was added.
(edit) @60   20 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   20 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   21 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   21 months Zed FileX is working.
(edit) @56   21 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   21 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   21 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   21 months Zed
(edit) @52   21 months Zed
(edit) @51   21 months Zed SDMMC low level driver was added.
(edit) @50   21 months Zed LED control description were added.
(edit) @48   21 months Zed Backlight was turned on for Display.
(edit) @47   21 months Zed
(edit) @46   21 months Zed
(edit) @45   21 months Zed Added SPI module for Display.
(edit) @44   22 months Zed
(edit) @43   22 months Zed
(edit) @42   22 months Zed
(edit) @41   22 months Zed
(edit) @40   22 months Zed
(edit) @39   22 months Zed RTC module was activated.
(edit) @38   22 months Zed Instruction and Data caches were activated.
(edit) @37   22 months Zed
(edit) @36   22 months Zed
(edit) @35   22 months Zed
(edit) @34   22 months Zed
(edit) @33   22 months Zed
(edit) @32   22 months Zed
(edit) @31   22 months Zed
(edit) @30   22 months Zed
(edit) @29   22 months Zed
(edit) @28   22 months Zed
(edit) @27   22 months Zed
(edit) @26   22 months Zed
(edit) @25   22 months Zed
(edit) @24   22 months Zed
(edit) @23   22 months Zed
(edit) @22   22 months Zed
(edit) @21   22 months Zed
(edit) @20   22 months Zed
(edit) @19   22 months Zed
(edit) @18   22 months Zed
(edit) @17   22 months Zed
(edit) @16   22 months Zed
(edit) @15   22 months Zed
(edit) @14   22 months Zed
(edit) @13   22 months Zed Forgot to add to the project these files.
(edit) @12   22 months Zed Added more files to the project.
(edit) @11   22 months Zed
(edit) @10   22 months Zed Added SEGGER project files.
(edit) @9   22 months Zed
(edit) @8   22 months Zed Rearranged several folders.
(edit) @7   22 months f.jahn
(add) @3   2 years f.jahn
Note: See TracRevisionLog for help on using the revision log.