source: ctrl/firmware

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @96   10 months Zed ADC3 with DMA was implemented. DTS was activated.
(edit) @95   10 months Zed Fixing project.
(edit) @94   10 months Zed Fixing project.
(edit) @93   10 months Zed Fixing project.
(edit) @92   10 months Zed Fixing project before changing MPU settings in CubeMX.
(edit) @91   10 months Zed ADC module was activated.
(edit) @90   10 months Zed Communication with M24256E EEPROM works.
(edit) @89   10 months Zed Added basic I2C EEPROM support.
(edit) @88   10 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @87   10 months Zed RTC is working.
(edit) @86   10 months Zed
(edit) @85   10 months Zed Fixing project before adding 1Wire port in CubeMX.
(edit) @84   10 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @83   10 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   10 months Zed DMA transfer to µSD-card was implemented.
(edit) @81   10 months Zed Modbus Master and Slave interfaces were added.
(edit) @80   10 months Zed Added main SYS_DATA structure.
(edit) @79   10 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   10 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   10 months Zed LwIP was removed from the project.
(edit) @76   10 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   10 months Zed FatFs is working, but without DMA.
(edit) @74   10 months Zed FatFs with DMA were implemented.
(edit) @73   10 months Zed FreeRTOS can be compiled without errors.
(edit) @72   10 months Zed FreeRTOS was added to the project.
(edit) @71   10 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   10 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   10 months Zed NetX can be compiled and initialized.
(edit) @68   10 months Zed Fixing project before Ethernet implementation.
(edit) @67   10 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   10 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   10 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   11 months Zed USART3 TX DMA is working.
(edit) @63   11 months Zed Fixing project.
(edit) @62   11 months Zed GSM STATUS pin is working.
(edit) @61   11 months Zed GSM thread was added.
(edit) @60   11 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   11 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   12 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   12 months Zed FileX is working.
(edit) @56   12 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   12 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   12 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   12 months Zed
(edit) @52   12 months Zed
(edit) @51   12 months Zed SDMMC low level driver was added.
(edit) @50   12 months Zed LED control description were added.
(edit) @48   12 months Zed Backlight was turned on for Display.
(edit) @47   12 months Zed
(edit) @46   12 months Zed
(edit) @45   12 months Zed Added SPI module for Display.
(edit) @44   12 months Zed
(edit) @43   12 months Zed
(edit) @42   12 months Zed
(edit) @41   12 months Zed
(edit) @40   12 months Zed
(edit) @39   12 months Zed RTC module was activated.
(edit) @38   12 months Zed Instruction and Data caches were activated.
(edit) @37   12 months Zed
(edit) @36   12 months Zed
(edit) @35   12 months Zed
(edit) @34   12 months Zed
(edit) @33   12 months Zed
(edit) @32   12 months Zed
(edit) @31   12 months Zed
(edit) @30   12 months Zed
(edit) @29   12 months Zed
(edit) @28   12 months Zed
(edit) @27   12 months Zed
(edit) @26   12 months Zed
(edit) @25   12 months Zed
(edit) @24   12 months Zed
(edit) @23   12 months Zed
(edit) @22   12 months Zed
(edit) @21   12 months Zed
(edit) @20   12 months Zed
(edit) @19   12 months Zed
(edit) @18   12 months Zed
(edit) @17   12 months Zed
(edit) @16   12 months Zed
(edit) @15   12 months Zed
(edit) @14   12 months Zed
(edit) @13   12 months Zed Forgot to add to the project these files.
(edit) @12   12 months Zed Added more files to the project.
(edit) @11   12 months Zed
(edit) @10   12 months Zed Added SEGGER project files.
(edit) @9   12 months Zed
(edit) @8   12 months Zed Rearranged several folders.
(edit) @7   12 months f.jahn
(add) @3   14 months f.jahn
Note: See TracRevisionLog for help on using the revision log.