| [9] | 1 | #MicroXplorer Configuration settings - do not modify |
|---|
| 2 | CAD.formats= |
|---|
| 3 | CAD.pinconfig= |
|---|
| 4 | CAD.provider= |
|---|
| [38] | 5 | CORTEX_M7.CPU_DCache=Enabled |
|---|
| 6 | CORTEX_M7.CPU_ICache=Enabled |
|---|
| 7 | CORTEX_M7.IPParameters=default_mode_Activation,CPU_ICache,CPU_DCache |
|---|
| [10] | 8 | CORTEX_M7.default_mode_Activation=1 |
|---|
| [45] | 9 | Dma.Request0=SPI4_TX |
|---|
| [64] | 10 | Dma.Request1=USART3_RX |
|---|
| 11 | Dma.Request2=USART3_TX |
|---|
| 12 | Dma.RequestsNb=3 |
|---|
| [45] | 13 | Dma.SPI4_TX.0.Direction=DMA_MEMORY_TO_PERIPH |
|---|
| 14 | Dma.SPI4_TX.0.EventEnable=DISABLE |
|---|
| 15 | Dma.SPI4_TX.0.FIFOMode=DMA_FIFOMODE_DISABLE |
|---|
| 16 | Dma.SPI4_TX.0.Instance=DMA1_Stream0 |
|---|
| 17 | Dma.SPI4_TX.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD |
|---|
| 18 | Dma.SPI4_TX.0.MemInc=DMA_MINC_ENABLE |
|---|
| 19 | Dma.SPI4_TX.0.Mode=DMA_NORMAL |
|---|
| 20 | Dma.SPI4_TX.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD |
|---|
| 21 | Dma.SPI4_TX.0.PeriphInc=DMA_PINC_DISABLE |
|---|
| 22 | Dma.SPI4_TX.0.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
|---|
| 23 | Dma.SPI4_TX.0.Priority=DMA_PRIORITY_LOW |
|---|
| 24 | Dma.SPI4_TX.0.RequestNumber=1 |
|---|
| 25 | Dma.SPI4_TX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
|---|
| 26 | Dma.SPI4_TX.0.SignalID=NONE |
|---|
| 27 | Dma.SPI4_TX.0.SyncEnable=DISABLE |
|---|
| 28 | Dma.SPI4_TX.0.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
|---|
| 29 | Dma.SPI4_TX.0.SyncRequestNumber=1 |
|---|
| 30 | Dma.SPI4_TX.0.SyncSignalID=NONE |
|---|
| [64] | 31 | Dma.USART3_RX.1.Direction=DMA_PERIPH_TO_MEMORY |
|---|
| 32 | Dma.USART3_RX.1.EventEnable=DISABLE |
|---|
| 33 | Dma.USART3_RX.1.FIFOMode=DMA_FIFOMODE_DISABLE |
|---|
| 34 | Dma.USART3_RX.1.Instance=DMA1_Stream1 |
|---|
| 35 | Dma.USART3_RX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE |
|---|
| 36 | Dma.USART3_RX.1.MemInc=DMA_MINC_ENABLE |
|---|
| 37 | Dma.USART3_RX.1.Mode=DMA_CIRCULAR |
|---|
| 38 | Dma.USART3_RX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
|---|
| 39 | Dma.USART3_RX.1.PeriphInc=DMA_PINC_DISABLE |
|---|
| 40 | Dma.USART3_RX.1.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
|---|
| 41 | Dma.USART3_RX.1.Priority=DMA_PRIORITY_LOW |
|---|
| 42 | Dma.USART3_RX.1.RequestNumber=1 |
|---|
| 43 | Dma.USART3_RX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
|---|
| 44 | Dma.USART3_RX.1.SignalID=NONE |
|---|
| 45 | Dma.USART3_RX.1.SyncEnable=DISABLE |
|---|
| 46 | Dma.USART3_RX.1.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
|---|
| 47 | Dma.USART3_RX.1.SyncRequestNumber=1 |
|---|
| 48 | Dma.USART3_RX.1.SyncSignalID=NONE |
|---|
| 49 | Dma.USART3_TX.2.Direction=DMA_MEMORY_TO_PERIPH |
|---|
| 50 | Dma.USART3_TX.2.EventEnable=DISABLE |
|---|
| 51 | Dma.USART3_TX.2.FIFOMode=DMA_FIFOMODE_DISABLE |
|---|
| 52 | Dma.USART3_TX.2.Instance=DMA1_Stream2 |
|---|
| 53 | Dma.USART3_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE |
|---|
| 54 | Dma.USART3_TX.2.MemInc=DMA_MINC_ENABLE |
|---|
| 55 | Dma.USART3_TX.2.Mode=DMA_NORMAL |
|---|
| 56 | Dma.USART3_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
|---|
| 57 | Dma.USART3_TX.2.PeriphInc=DMA_PINC_DISABLE |
|---|
| 58 | Dma.USART3_TX.2.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
|---|
| 59 | Dma.USART3_TX.2.Priority=DMA_PRIORITY_HIGH |
|---|
| 60 | Dma.USART3_TX.2.RequestNumber=1 |
|---|
| 61 | Dma.USART3_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
|---|
| 62 | Dma.USART3_TX.2.SignalID=NONE |
|---|
| 63 | Dma.USART3_TX.2.SyncEnable=DISABLE |
|---|
| 64 | Dma.USART3_TX.2.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
|---|
| 65 | Dma.USART3_TX.2.SyncRequestNumber=1 |
|---|
| 66 | Dma.USART3_TX.2.SyncSignalID=NONE |
|---|
| [9] | 67 | File.Version=6 |
|---|
| [48] | 68 | GPIO.groupedBy=Group By Peripherals |
|---|
| [9] | 69 | KeepUserPlacement=false |
|---|
| [10] | 70 | MMTAppRegionsCount=0 |
|---|
| 71 | MMTConfigApplied=false |
|---|
| [9] | 72 | Mcu.CPN=STM32H723ZET6 |
|---|
| 73 | Mcu.Family=STM32H7 |
|---|
| [10] | 74 | Mcu.IP0=CORTEX_M7 |
|---|
| [48] | 75 | Mcu.IP1=DEBUG |
|---|
| [61] | 76 | Mcu.IP10=USART3 |
|---|
| [48] | 77 | Mcu.IP2=DMA |
|---|
| 78 | Mcu.IP3=MEMORYMAP |
|---|
| 79 | Mcu.IP4=NVIC |
|---|
| 80 | Mcu.IP5=RCC |
|---|
| 81 | Mcu.IP6=RTC |
|---|
| [51] | 82 | Mcu.IP7=SDMMC1 |
|---|
| 83 | Mcu.IP8=SPI4 |
|---|
| 84 | Mcu.IP9=SYS |
|---|
| [61] | 85 | Mcu.IPNb=11 |
|---|
| [9] | 86 | Mcu.Name=STM32H723ZETx |
|---|
| 87 | Mcu.Package=LQFP144 |
|---|
| [50] | 88 | Mcu.Pin0=PE6 |
|---|
| 89 | Mcu.Pin1=PC14-OSC32_IN |
|---|
| [58] | 90 | Mcu.Pin10=PE12 |
|---|
| 91 | Mcu.Pin11=PE13 |
|---|
| 92 | Mcu.Pin12=PE14 |
|---|
| 93 | Mcu.Pin13=PE15 |
|---|
| [61] | 94 | Mcu.Pin14=PD8 |
|---|
| 95 | Mcu.Pin15=PD9 |
|---|
| 96 | Mcu.Pin16=PD10 |
|---|
| [63] | 97 | Mcu.Pin17=PD11 |
|---|
| 98 | Mcu.Pin18=PD12 |
|---|
| 99 | Mcu.Pin19=PD13 |
|---|
| [50] | 100 | Mcu.Pin2=PC15-OSC32_OUT |
|---|
| [63] | 101 | Mcu.Pin20=PC8 |
|---|
| 102 | Mcu.Pin21=PC9 |
|---|
| 103 | Mcu.Pin22=PA8 |
|---|
| 104 | Mcu.Pin23=PA13(JTMS/SWDIO) |
|---|
| 105 | Mcu.Pin24=PA14(JTCK/SWCLK) |
|---|
| 106 | Mcu.Pin25=PC10 |
|---|
| 107 | Mcu.Pin26=PC11 |
|---|
| 108 | Mcu.Pin27=PC12 |
|---|
| 109 | Mcu.Pin28=PD2 |
|---|
| 110 | Mcu.Pin29=PD7 |
|---|
| [50] | 111 | Mcu.Pin3=PH0-OSC_IN |
|---|
| [63] | 112 | Mcu.Pin30=PG9 |
|---|
| 113 | Mcu.Pin31=PG10 |
|---|
| 114 | Mcu.Pin32=PG11 |
|---|
| 115 | Mcu.Pin33=PG12 |
|---|
| 116 | Mcu.Pin34=PG13 |
|---|
| 117 | Mcu.Pin35=PG15 |
|---|
| 118 | Mcu.Pin36=VP_RTC_VS_RTC_Activate |
|---|
| 119 | Mcu.Pin37=VP_SYS_VS_tim7 |
|---|
| 120 | Mcu.Pin38=VP_MEMORYMAP_VS_MEMORYMAP |
|---|
| 121 | Mcu.Pin39=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0 |
|---|
| [50] | 122 | Mcu.Pin4=PH1-OSC_OUT |
|---|
| [63] | 123 | Mcu.Pin40=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0 |
|---|
| 124 | Mcu.Pin41=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0 |
|---|
| [58] | 125 | Mcu.Pin5=PF15 |
|---|
| 126 | Mcu.Pin6=PG0 |
|---|
| 127 | Mcu.Pin7=PG1 |
|---|
| 128 | Mcu.Pin8=PE7 |
|---|
| 129 | Mcu.Pin9=PE11 |
|---|
| [63] | 130 | Mcu.PinsNb=42 |
|---|
| [54] | 131 | Mcu.ThirdParty0=STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0 |
|---|
| 132 | Mcu.ThirdPartyNb=1 |
|---|
| [10] | 133 | Mcu.UserConstants= |
|---|
| [9] | 134 | Mcu.UserName=STM32H723ZETx |
|---|
| [10] | 135 | MxCube.Version=6.13.0 |
|---|
| 136 | MxDb.Version=DB.6.0.130 |
|---|
| [54] | 137 | NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
|---|
| 138 | NVIC.DMA1_Stream0_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true\:true |
|---|
| [64] | 139 | NVIC.DMA1_Stream1_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true\:true |
|---|
| 140 | NVIC.DMA1_Stream2_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true\:true |
|---|
| [54] | 141 | NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
|---|
| [9] | 142 | NVIC.ForceEnableDMAVector=true |
|---|
| [54] | 143 | NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
|---|
| 144 | NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
|---|
| 145 | NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
|---|
| 146 | NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false |
|---|
| [9] | 147 | NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 |
|---|
| [54] | 148 | NVIC.SDMMC1_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true\:true |
|---|
| 149 | NVIC.SPI4_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true\:true |
|---|
| 150 | NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false |
|---|
| 151 | NVIC.SavedPendsvIrqHandlerGenerated=true |
|---|
| 152 | NVIC.SavedSvcallIrqHandlerGenerated=true |
|---|
| 153 | NVIC.SavedSystickIrqHandlerGenerated=true |
|---|
| 154 | NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:true\:false |
|---|
| 155 | NVIC.TIM7_IRQn=true\:15\:0\:false\:false\:true\:false\:false\:true\:true |
|---|
| 156 | NVIC.TimeBase=TIM7_IRQn |
|---|
| 157 | NVIC.TimeBaseIP=TIM7 |
|---|
| [63] | 158 | NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true\:true |
|---|
| [54] | 159 | NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
|---|
| [48] | 160 | PA13(JTMS/SWDIO).Mode=Serial_Wire |
|---|
| 161 | PA13(JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO |
|---|
| 162 | PA14(JTCK/SWCLK).Mode=Serial_Wire |
|---|
| 163 | PA14(JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK |
|---|
| [54] | 164 | PA8.GPIOParameters=GPIO_PuPd,GPIO_Label |
|---|
| 165 | PA8.GPIO_Label=SD_DETECT |
|---|
| [59] | 166 | PA8.GPIO_PuPd=GPIO_PULLUP |
|---|
| [54] | 167 | PA8.Locked=true |
|---|
| 168 | PA8.Signal=GPIO_Input |
|---|
| [51] | 169 | PC10.Mode=SD_4_bits_Wide_bus |
|---|
| 170 | PC10.Signal=SDMMC1_D2 |
|---|
| 171 | PC11.Mode=SD_4_bits_Wide_bus |
|---|
| 172 | PC11.Signal=SDMMC1_D3 |
|---|
| 173 | PC12.Mode=SD_4_bits_Wide_bus |
|---|
| 174 | PC12.Signal=SDMMC1_CK |
|---|
| [39] | 175 | PC14-OSC32_IN.Mode=LSE-External-Oscillator |
|---|
| 176 | PC14-OSC32_IN.Signal=RCC_OSC32_IN |
|---|
| 177 | PC15-OSC32_OUT.Mode=LSE-External-Oscillator |
|---|
| 178 | PC15-OSC32_OUT.Signal=RCC_OSC32_OUT |
|---|
| [51] | 179 | PC8.Locked=true |
|---|
| 180 | PC8.Mode=SD_4_bits_Wide_bus |
|---|
| 181 | PC8.Signal=SDMMC1_D0 |
|---|
| 182 | PC9.Mode=SD_4_bits_Wide_bus |
|---|
| 183 | PC9.Signal=SDMMC1_D1 |
|---|
| [61] | 184 | PD10.GPIOParameters=GPIO_Label |
|---|
| 185 | PD10.GPIO_Label=GSM_PWR |
|---|
| 186 | PD10.Locked=true |
|---|
| 187 | PD10.Signal=GPIO_Output |
|---|
| [63] | 188 | PD11.Locked=true |
|---|
| 189 | PD11.Signal=USART3_CTS |
|---|
| 190 | PD12.Locked=true |
|---|
| 191 | PD12.Signal=USART3_RTS |
|---|
| [62] | 192 | PD13.GPIOParameters=GPIO_Label |
|---|
| 193 | PD13.GPIO_Label=GSM_STATUS |
|---|
| 194 | PD13.Locked=true |
|---|
| 195 | PD13.Signal=GPIO_Input |
|---|
| [51] | 196 | PD2.Mode=SD_4_bits_Wide_bus |
|---|
| 197 | PD2.Signal=SDMMC1_CMD |
|---|
| [50] | 198 | PD7.GPIOParameters=GPIO_Label |
|---|
| 199 | PD7.GPIO_Label=OUTPUT_ON_LED |
|---|
| 200 | PD7.Locked=true |
|---|
| 201 | PD7.Signal=GPIO_Output |
|---|
| [61] | 202 | PD8.Locked=true |
|---|
| 203 | PD8.Mode=Asynchronous |
|---|
| 204 | PD8.Signal=USART3_TX |
|---|
| 205 | PD9.Locked=true |
|---|
| 206 | PD9.Mode=Asynchronous |
|---|
| 207 | PD9.Signal=USART3_RX |
|---|
| [45] | 208 | PE11.GPIOParameters=GPIO_Label |
|---|
| 209 | PE11.GPIO_Label=SPI4_NSS_DISPLAY |
|---|
| 210 | PE11.Locked=true |
|---|
| 211 | PE11.Mode=NSS_Signal_Hard_Output |
|---|
| 212 | PE11.Signal=SPI4_NSS |
|---|
| 213 | PE12.GPIOParameters=GPIO_Label |
|---|
| 214 | PE12.GPIO_Label=SPI4_SCK_DISPLAY |
|---|
| 215 | PE12.Locked=true |
|---|
| [50] | 216 | PE12.Mode=Simplex_Bidirectional_Master |
|---|
| [45] | 217 | PE12.Signal=SPI4_SCK |
|---|
| [48] | 218 | PE13.GPIOParameters=GPIO_Label |
|---|
| 219 | PE13.GPIO_Label=PWM_DISPLAY_LIGHT |
|---|
| 220 | PE13.Locked=true |
|---|
| 221 | PE13.Signal=GPIO_Output |
|---|
| [45] | 222 | PE14.GPIOParameters=GPIO_Label |
|---|
| 223 | PE14.GPIO_Label=SPI4_MOSI_DISPLAY |
|---|
| 224 | PE14.Locked=true |
|---|
| [50] | 225 | PE14.Mode=Simplex_Bidirectional_Master |
|---|
| [45] | 226 | PE14.Signal=SPI4_MOSI |
|---|
| [48] | 227 | PE15.GPIOParameters=PinState,GPIO_Label |
|---|
| 228 | PE15.GPIO_Label=RST_DISPLAY |
|---|
| 229 | PE15.Locked=true |
|---|
| 230 | PE15.PinState=GPIO_PIN_RESET |
|---|
| 231 | PE15.Signal=GPIO_Output |
|---|
| [50] | 232 | PE6.GPIOParameters=GPIO_Label |
|---|
| 233 | PE6.GPIO_Label=TX1_LED |
|---|
| 234 | PE6.Locked=true |
|---|
| 235 | PE6.Signal=GPIO_Output |
|---|
| [58] | 236 | PE7.GPIOParameters=GPIO_Label |
|---|
| 237 | PE7.GPIO_Label=POWER_15V_EN |
|---|
| 238 | PE7.Locked=true |
|---|
| 239 | PE7.Signal=GPIO_Output |
|---|
| 240 | PF15.GPIOParameters=GPIO_Label |
|---|
| 241 | PF15.GPIO_Label=POWER_4V_EN |
|---|
| 242 | PF15.Locked=true |
|---|
| 243 | PF15.Signal=GPIO_Output |
|---|
| 244 | PG0.GPIOParameters=GPIO_Label |
|---|
| 245 | PG0.GPIO_Label=POWER_5V_EN |
|---|
| 246 | PG0.Locked=true |
|---|
| 247 | PG0.Signal=GPIO_Output |
|---|
| 248 | PG1.GPIOParameters=GPIO_Label |
|---|
| 249 | PG1.GPIO_Label=POWER_10V_EN |
|---|
| 250 | PG1.Locked=true |
|---|
| 251 | PG1.Signal=GPIO_Output |
|---|
| [50] | 252 | PG10.GPIOParameters=GPIO_Label |
|---|
| 253 | PG10.GPIO_Label=CHARGE_LED |
|---|
| 254 | PG10.Locked=true |
|---|
| 255 | PG10.Signal=GPIO_Output |
|---|
| 256 | PG11.GPIOParameters=GPIO_Label |
|---|
| 257 | PG11.GPIO_Label=RX2_LED |
|---|
| 258 | PG11.Locked=true |
|---|
| 259 | PG11.Signal=GPIO_Output |
|---|
| 260 | PG12.GPIOParameters=GPIO_Label |
|---|
| 261 | PG12.GPIO_Label=RX1_LED |
|---|
| 262 | PG12.Locked=true |
|---|
| 263 | PG12.Signal=GPIO_Output |
|---|
| 264 | PG13.GPIOParameters=GPIO_Label |
|---|
| 265 | PG13.GPIO_Label=TX2_LED |
|---|
| 266 | PG13.Locked=true |
|---|
| 267 | PG13.Signal=GPIO_Output |
|---|
| [61] | 268 | PG15.GPIOParameters=GPIO_Label |
|---|
| 269 | PG15.GPIO_Label=BUZZER |
|---|
| 270 | PG15.Locked=true |
|---|
| 271 | PG15.Signal=GPIO_Output |
|---|
| [50] | 272 | PG9.GPIOParameters=GPIO_Label |
|---|
| 273 | PG9.GPIO_Label=ERROR_LED |
|---|
| 274 | PG9.Locked=true |
|---|
| 275 | PG9.Signal=GPIO_Output |
|---|
| [39] | 276 | PH0-OSC_IN.Mode=HSE-External-Oscillator |
|---|
| 277 | PH0-OSC_IN.Signal=RCC_OSC_IN |
|---|
| 278 | PH1-OSC_OUT.Mode=HSE-External-Oscillator |
|---|
| 279 | PH1-OSC_OUT.Signal=RCC_OSC_OUT |
|---|
| [9] | 280 | PinOutPanel.RotationAngle=0 |
|---|
| 281 | ProjectManager.AskForMigrate=true |
|---|
| 282 | ProjectManager.BackupPrevious=false |
|---|
| 283 | ProjectManager.CompilerOptimize=6 |
|---|
| 284 | ProjectManager.ComputerToolchain=false |
|---|
| [47] | 285 | ProjectManager.CoupleFile=true |
|---|
| [9] | 286 | ProjectManager.CustomerFirmwarePackage= |
|---|
| 287 | ProjectManager.DefaultFWLocation=true |
|---|
| 288 | ProjectManager.DeletePrevious=true |
|---|
| 289 | ProjectManager.DeviceId=STM32H723ZETx |
|---|
| [59] | 290 | ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.12.1 |
|---|
| [47] | 291 | ProjectManager.FreePins=true |
|---|
| 292 | ProjectManager.HalAssertFull=true |
|---|
| [9] | 293 | ProjectManager.HeapSize=0x200 |
|---|
| 294 | ProjectManager.KeepUserCode=true |
|---|
| [10] | 295 | ProjectManager.LastFirmware=true |
|---|
| [54] | 296 | ProjectManager.LibraryCopy=1 |
|---|
| [9] | 297 | ProjectManager.MainLocation=Core/Src |
|---|
| 298 | ProjectManager.NoMain=false |
|---|
| [54] | 299 | ProjectManager.PreviousToolchain=STM32CubeIDE |
|---|
| [9] | 300 | ProjectManager.ProjectBuild=false |
|---|
| [10] | 301 | ProjectManager.ProjectFileName=charger.ioc |
|---|
| 302 | ProjectManager.ProjectName=charger |
|---|
| [9] | 303 | ProjectManager.ProjectStructure= |
|---|
| 304 | ProjectManager.RegisterCallBack= |
|---|
| 305 | ProjectManager.StackSize=0x400 |
|---|
| [54] | 306 | ProjectManager.TargetToolchain=STM32CubeIDE |
|---|
| [9] | 307 | ProjectManager.ToolChainLocation= |
|---|
| 308 | ProjectManager.UAScriptAfterPath= |
|---|
| 309 | ProjectManager.UAScriptBeforePath= |
|---|
| [54] | 310 | ProjectManager.UnderRoot=true |
|---|
| [62] | 311 | ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true |
|---|
| [45] | 312 | RCC.ADCFreq_Value=166666666.66666666 |
|---|
| [39] | 313 | RCC.AHB12Freq_Value=100000000 |
|---|
| 314 | RCC.AHB4Freq_Value=100000000 |
|---|
| 315 | RCC.APB1Freq_Value=100000000 |
|---|
| 316 | RCC.APB2Freq_Value=100000000 |
|---|
| 317 | RCC.APB3Freq_Value=100000000 |
|---|
| 318 | RCC.APB4Freq_Value=100000000 |
|---|
| 319 | RCC.AXIClockFreq_Value=100000000 |
|---|
| [9] | 320 | RCC.CECFreq_Value=32000 |
|---|
| 321 | RCC.CKPERFreq_Value=64000000 |
|---|
| [39] | 322 | RCC.CortexFreq_Value=100000000 |
|---|
| 323 | RCC.CpuClockFreq_Value=100000000 |
|---|
| 324 | RCC.D1CPREFreq_Value=100000000 |
|---|
| [51] | 325 | RCC.DFSDMACLkFreq_Value=50000000 |
|---|
| [39] | 326 | RCC.DFSDMFreq_Value=100000000 |
|---|
| [45] | 327 | RCC.DIVM1=5 |
|---|
| 328 | RCC.DIVM2=3 |
|---|
| [61] | 329 | RCC.DIVM3=25 |
|---|
| [45] | 330 | RCC.DIVN1=40 |
|---|
| 331 | RCC.DIVN2=40 |
|---|
| [61] | 332 | RCC.DIVN3=200 |
|---|
| [39] | 333 | RCC.DIVP1Freq_Value=100000000 |
|---|
| [45] | 334 | RCC.DIVP2Freq_Value=166666666.66666666 |
|---|
| [61] | 335 | RCC.DIVP3Freq_Value=100000000 |
|---|
| [51] | 336 | RCC.DIVQ1=4 |
|---|
| 337 | RCC.DIVQ1Freq_Value=50000000 |
|---|
| [45] | 338 | RCC.DIVQ2=11 |
|---|
| 339 | RCC.DIVQ2Freq_Value=30303030.3030303 |
|---|
| [61] | 340 | RCC.DIVQ3=8 |
|---|
| 341 | RCC.DIVQ3Freq_Value=25000000 |
|---|
| [39] | 342 | RCC.DIVR1Freq_Value=100000000 |
|---|
| [51] | 343 | RCC.DIVR2=10 |
|---|
| 344 | RCC.DIVR2Freq_Value=33333333.333333332 |
|---|
| [61] | 345 | RCC.DIVR3Freq_Value=100000000 |
|---|
| [51] | 346 | RCC.FDCANFreq_Value=50000000 |
|---|
| [39] | 347 | RCC.FMCFreq_Value=100000000 |
|---|
| [9] | 348 | RCC.FamilyName=M |
|---|
| [39] | 349 | RCC.HCLK3ClockFreq_Value=100000000 |
|---|
| 350 | RCC.HCLKFreq_Value=100000000 |
|---|
| 351 | RCC.I2C123Freq_Value=100000000 |
|---|
| 352 | RCC.I2C4Freq_Value=100000000 |
|---|
| [61] | 353 | RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Spi45ClockSelection,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value |
|---|
| [39] | 354 | RCC.LPTIM1Freq_Value=100000000 |
|---|
| 355 | RCC.LPTIM2Freq_Value=100000000 |
|---|
| 356 | RCC.LPTIM345Freq_Value=100000000 |
|---|
| 357 | RCC.LPUART1Freq_Value=100000000 |
|---|
| [61] | 358 | RCC.LTDCFreq_Value=100000000 |
|---|
| [9] | 359 | RCC.MCO1PinFreq_Value=64000000 |
|---|
| [39] | 360 | RCC.MCO2PinFreq_Value=100000000 |
|---|
| [45] | 361 | RCC.PLL2FRACN=0 |
|---|
| 362 | RCC.PLLFRACN=0 |
|---|
| [39] | 363 | RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE |
|---|
| 364 | RCC.QSPIFreq_Value=100000000 |
|---|
| [9] | 365 | RCC.RNGFreq_Value=48000000 |
|---|
| [39] | 366 | RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE |
|---|
| 367 | RCC.RTCFreq_Value=32768 |
|---|
| [51] | 368 | RCC.SAI1Freq_Value=50000000 |
|---|
| 369 | RCC.SAI4AFreq_Value=50000000 |
|---|
| 370 | RCC.SAI4BFreq_Value=50000000 |
|---|
| 371 | RCC.SDMMCFreq_Value=50000000 |
|---|
| 372 | RCC.SPDIFRXFreq_Value=50000000 |
|---|
| 373 | RCC.SPI123Freq_Value=50000000 |
|---|
| 374 | RCC.SPI45Freq_Value=25000000 |
|---|
| [39] | 375 | RCC.SPI6Freq_Value=100000000 |
|---|
| 376 | RCC.SWPMI1Freq_Value=100000000 |
|---|
| 377 | RCC.SYSCLKFreq_VALUE=100000000 |
|---|
| 378 | RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK |
|---|
| [51] | 379 | RCC.Spi45ClockSelection=RCC_SPI45CLKSOURCE_HSE |
|---|
| [39] | 380 | RCC.Tim1OutputFreq_Value=100000000 |
|---|
| 381 | RCC.Tim2OutputFreq_Value=100000000 |
|---|
| [48] | 382 | RCC.TraceFreq_Value=100000000 |
|---|
| [39] | 383 | RCC.USART16Freq_Value=100000000 |
|---|
| [61] | 384 | RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL3 |
|---|
| 385 | RCC.USART234578Freq_Value=25000000 |
|---|
| [51] | 386 | RCC.USBFreq_Value=50000000 |
|---|
| [39] | 387 | RCC.VCO1OutputFreq_Value=200000000 |
|---|
| [45] | 388 | RCC.VCO2OutputFreq_Value=333333333.3333333 |
|---|
| [61] | 389 | RCC.VCO3OutputFreq_Value=200000000 |
|---|
| [45] | 390 | RCC.VCOInput1Freq_Value=5000000 |
|---|
| 391 | RCC.VCOInput2Freq_Value=8333333.333333333 |
|---|
| [61] | 392 | RCC.VCOInput3Freq_Value=1000000 |
|---|
| [51] | 393 | SDMMC1.ClockPowerSave=SDMMC_CLOCK_POWER_SAVE_ENABLE |
|---|
| 394 | SDMMC1.HardwareFlowControl=SDMMC_HARDWARE_FLOW_CONTROL_ENABLE |
|---|
| 395 | SDMMC1.IPParameters=ClockPowerSave,HardwareFlowControl |
|---|
| [50] | 396 | SPI4.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_4 |
|---|
| [51] | 397 | SPI4.CalculateBaudRate=6.25 MBits/s |
|---|
| [45] | 398 | SPI4.DataSize=SPI_DATASIZE_9BIT |
|---|
| [50] | 399 | SPI4.Direction=SPI_DIRECTION_1LINE |
|---|
| [45] | 400 | SPI4.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,DataSize,BaudRatePrescaler |
|---|
| 401 | SPI4.Mode=SPI_MODE_MASTER |
|---|
| 402 | SPI4.VirtualNSS=VM_NSSHARD |
|---|
| 403 | SPI4.VirtualType=VM_MASTER |
|---|
| [54] | 404 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_APP_MEM_POOL_SIZE=8192 |
|---|
| [59] | 405 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_DRIVER_SD_INIT=1 |
|---|
| [54] | 406 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_ENABLE_EXFAT=1 |
|---|
| 407 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_ENABLE_FAULT_TOLERANT=1 |
|---|
| 408 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_FAULT_TOLERANT=1 |
|---|
| 409 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_FAULT_TOLERANT_DATA=1 |
|---|
| 410 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FileOoSystemJjFileX_Checked=true |
|---|
| 411 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FileOoSystemJjInterfaces_Checked=true |
|---|
| 412 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FileXCcFileOoSystemJjFileXJjCore=true |
|---|
| [64] | 413 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.IPParameters=TX_APP_MEM_POOL_SIZE,FX_APP_MEM_POOL_SIZE,TX_APP_GENERATE_INIT_CODE,TX_APP_CREATION,TX_ENABLE_STACK_CHECKING,TX_NO_FILEX_POINTER,TX_LOW_POWER,FX_ENABLE_EXFAT,FX_ENABLE_FAULT_TOLERANT,FX_FAULT_TOLERANT,FX_FAULT_TOLERANT_DATA,FX_DRIVER_SD_INIT,TX_TIMER_TICKS_PER_SECOND,ThreadXCcRTOSJjThreadXJjCore,ThreadXCcRTOSJjThreadXJjLowOoPowerOosupport,FileXCcFileOoSystemJjFileXJjCore,InterfacesCcFileOoSystemJjFileXOoSDOointerface,TX_APP_MSG_QUEUE_CREATION,TX_MSG_QUEUE_NAME,TX_NB_MSG |
|---|
| [54] | 414 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.InterfacesCcFileOoSystemJjFileXOoSDOointerface=true |
|---|
| 415 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.RTOSJjThreadX_Checked=true |
|---|
| [57] | 416 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_CREATION=0 |
|---|
| [54] | 417 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_GENERATE_INIT_CODE=false |
|---|
| 418 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_MEM_POOL_SIZE=8192 |
|---|
| [64] | 419 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_MSG_QUEUE_CREATION=1 |
|---|
| [54] | 420 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_ENABLE_STACK_CHECKING=1 |
|---|
| 421 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_LOW_POWER=1 |
|---|
| [64] | 422 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_MSG_QUEUE_NAME=gsm queue |
|---|
| 423 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_NB_MSG=512 |
|---|
| [54] | 424 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_NO_FILEX_POINTER=1 |
|---|
| [56] | 425 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_TIMER_TICKS_PER_SECOND=1000 |
|---|
| [54] | 426 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.ThreadXCcRTOSJjThreadXJjCore=true |
|---|
| 427 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.ThreadXCcRTOSJjThreadXJjLowOoPowerOosupport=true |
|---|
| 428 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0_IsAnAzureRtosMw=true |
|---|
| 429 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0_SwParameter=InterfacesCcFileOoSystemJjFileXOoSDOointerface\:true;ThreadXCcRTOSJjThreadXJjLowOoPowerOosupport\:true;FileXCcFileOoSystemJjFileXJjCore\:true;ThreadXCcRTOSJjThreadXJjCore\:true; |
|---|
| [63] | 430 | USART3.DMADisableonRxErrorParam=ADVFEATURE_DMA_DISABLEONRXERROR |
|---|
| 431 | USART3.IPParameters=VirtualMode-Asynchronous,SwapParam,DMADisableonRxErrorParam |
|---|
| 432 | USART3.SwapParam=ADVFEATURE_SWAP_ENABLE |
|---|
| [61] | 433 | USART3.VirtualMode-Asynchronous=VM_ASYNC |
|---|
| [10] | 434 | VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg |
|---|
| 435 | VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP |
|---|
| [39] | 436 | VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled |
|---|
| 437 | VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate |
|---|
| [54] | 438 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0.Mode=FileOoSystemJjFileX |
|---|
| 439 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0.Signal=STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0 |
|---|
| 440 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0.Mode=FileOoSystemJjInterfaces |
|---|
| 441 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0.Signal=STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0 |
|---|
| 442 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0.Mode=RTOSJjThreadX |
|---|
| 443 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0.Signal=STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0 |
|---|
| 444 | VP_SYS_VS_tim7.Mode=TIM7 |
|---|
| 445 | VP_SYS_VS_tim7.Signal=SYS_VS_tim7 |
|---|
| [9] | 446 | board=custom |
|---|
