1 | #MicroXplorer Configuration settings - do not modify |
---|
2 | CAD.formats= |
---|
3 | CAD.pinconfig= |
---|
4 | CAD.provider= |
---|
5 | CORTEX_M7.CPU_DCache=Enabled |
---|
6 | CORTEX_M7.CPU_ICache=Enabled |
---|
7 | CORTEX_M7.IPParameters=default_mode_Activation,CPU_ICache,CPU_DCache |
---|
8 | CORTEX_M7.default_mode_Activation=1 |
---|
9 | Dma.Request0=SPI4_TX |
---|
10 | Dma.Request1=USART3_RX |
---|
11 | Dma.Request2=USART3_TX |
---|
12 | Dma.RequestsNb=3 |
---|
13 | Dma.SPI4_TX.0.Direction=DMA_MEMORY_TO_PERIPH |
---|
14 | Dma.SPI4_TX.0.EventEnable=DISABLE |
---|
15 | Dma.SPI4_TX.0.FIFOMode=DMA_FIFOMODE_DISABLE |
---|
16 | Dma.SPI4_TX.0.Instance=DMA1_Stream0 |
---|
17 | Dma.SPI4_TX.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD |
---|
18 | Dma.SPI4_TX.0.MemInc=DMA_MINC_ENABLE |
---|
19 | Dma.SPI4_TX.0.Mode=DMA_NORMAL |
---|
20 | Dma.SPI4_TX.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD |
---|
21 | Dma.SPI4_TX.0.PeriphInc=DMA_PINC_DISABLE |
---|
22 | Dma.SPI4_TX.0.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
---|
23 | Dma.SPI4_TX.0.Priority=DMA_PRIORITY_LOW |
---|
24 | Dma.SPI4_TX.0.RequestNumber=1 |
---|
25 | Dma.SPI4_TX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
---|
26 | Dma.SPI4_TX.0.SignalID=NONE |
---|
27 | Dma.SPI4_TX.0.SyncEnable=DISABLE |
---|
28 | Dma.SPI4_TX.0.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
---|
29 | Dma.SPI4_TX.0.SyncRequestNumber=1 |
---|
30 | Dma.SPI4_TX.0.SyncSignalID=NONE |
---|
31 | Dma.USART3_RX.1.Direction=DMA_PERIPH_TO_MEMORY |
---|
32 | Dma.USART3_RX.1.EventEnable=DISABLE |
---|
33 | Dma.USART3_RX.1.FIFOMode=DMA_FIFOMODE_DISABLE |
---|
34 | Dma.USART3_RX.1.Instance=DMA1_Stream1 |
---|
35 | Dma.USART3_RX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE |
---|
36 | Dma.USART3_RX.1.MemInc=DMA_MINC_ENABLE |
---|
37 | Dma.USART3_RX.1.Mode=DMA_CIRCULAR |
---|
38 | Dma.USART3_RX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
---|
39 | Dma.USART3_RX.1.PeriphInc=DMA_PINC_DISABLE |
---|
40 | Dma.USART3_RX.1.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
---|
41 | Dma.USART3_RX.1.Priority=DMA_PRIORITY_LOW |
---|
42 | Dma.USART3_RX.1.RequestNumber=1 |
---|
43 | Dma.USART3_RX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
---|
44 | Dma.USART3_RX.1.SignalID=NONE |
---|
45 | Dma.USART3_RX.1.SyncEnable=DISABLE |
---|
46 | Dma.USART3_RX.1.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
---|
47 | Dma.USART3_RX.1.SyncRequestNumber=1 |
---|
48 | Dma.USART3_RX.1.SyncSignalID=NONE |
---|
49 | Dma.USART3_TX.2.Direction=DMA_MEMORY_TO_PERIPH |
---|
50 | Dma.USART3_TX.2.EventEnable=DISABLE |
---|
51 | Dma.USART3_TX.2.FIFOMode=DMA_FIFOMODE_DISABLE |
---|
52 | Dma.USART3_TX.2.Instance=DMA1_Stream2 |
---|
53 | Dma.USART3_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE |
---|
54 | Dma.USART3_TX.2.MemInc=DMA_MINC_ENABLE |
---|
55 | Dma.USART3_TX.2.Mode=DMA_NORMAL |
---|
56 | Dma.USART3_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE |
---|
57 | Dma.USART3_TX.2.PeriphInc=DMA_PINC_DISABLE |
---|
58 | Dma.USART3_TX.2.Polarity=HAL_DMAMUX_REQ_GEN_RISING |
---|
59 | Dma.USART3_TX.2.Priority=DMA_PRIORITY_HIGH |
---|
60 | Dma.USART3_TX.2.RequestNumber=1 |
---|
61 | Dma.USART3_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode,SignalID,Polarity,RequestNumber,SyncSignalID,SyncPolarity,SyncEnable,EventEnable,SyncRequestNumber |
---|
62 | Dma.USART3_TX.2.SignalID=NONE |
---|
63 | Dma.USART3_TX.2.SyncEnable=DISABLE |
---|
64 | Dma.USART3_TX.2.SyncPolarity=HAL_DMAMUX_SYNC_NO_EVENT |
---|
65 | Dma.USART3_TX.2.SyncRequestNumber=1 |
---|
66 | Dma.USART3_TX.2.SyncSignalID=NONE |
---|
67 | File.Version=6 |
---|
68 | GPIO.groupedBy=Group By Peripherals |
---|
69 | KeepUserPlacement=false |
---|
70 | MMTAppRegionsCount=0 |
---|
71 | MMTConfigApplied=false |
---|
72 | Mcu.CPN=STM32H723ZET6 |
---|
73 | Mcu.Family=STM32H7 |
---|
74 | Mcu.IP0=CORTEX_M7 |
---|
75 | Mcu.IP1=DEBUG |
---|
76 | Mcu.IP10=USART3 |
---|
77 | Mcu.IP2=DMA |
---|
78 | Mcu.IP3=MEMORYMAP |
---|
79 | Mcu.IP4=NVIC |
---|
80 | Mcu.IP5=RCC |
---|
81 | Mcu.IP6=RTC |
---|
82 | Mcu.IP7=SDMMC1 |
---|
83 | Mcu.IP8=SPI4 |
---|
84 | Mcu.IP9=SYS |
---|
85 | Mcu.IPNb=11 |
---|
86 | Mcu.Name=STM32H723ZETx |
---|
87 | Mcu.Package=LQFP144 |
---|
88 | Mcu.Pin0=PE6 |
---|
89 | Mcu.Pin1=PC14-OSC32_IN |
---|
90 | Mcu.Pin10=PE12 |
---|
91 | Mcu.Pin11=PE13 |
---|
92 | Mcu.Pin12=PE14 |
---|
93 | Mcu.Pin13=PE15 |
---|
94 | Mcu.Pin14=PD8 |
---|
95 | Mcu.Pin15=PD9 |
---|
96 | Mcu.Pin16=PD10 |
---|
97 | Mcu.Pin17=PD11 |
---|
98 | Mcu.Pin18=PD12 |
---|
99 | Mcu.Pin19=PD13 |
---|
100 | Mcu.Pin2=PC15-OSC32_OUT |
---|
101 | Mcu.Pin20=PC8 |
---|
102 | Mcu.Pin21=PC9 |
---|
103 | Mcu.Pin22=PA8 |
---|
104 | Mcu.Pin23=PA13(JTMS/SWDIO) |
---|
105 | Mcu.Pin24=PA14(JTCK/SWCLK) |
---|
106 | Mcu.Pin25=PC10 |
---|
107 | Mcu.Pin26=PC11 |
---|
108 | Mcu.Pin27=PC12 |
---|
109 | Mcu.Pin28=PD2 |
---|
110 | Mcu.Pin29=PD7 |
---|
111 | Mcu.Pin3=PH0-OSC_IN |
---|
112 | Mcu.Pin30=PG9 |
---|
113 | Mcu.Pin31=PG10 |
---|
114 | Mcu.Pin32=PG11 |
---|
115 | Mcu.Pin33=PG12 |
---|
116 | Mcu.Pin34=PG13 |
---|
117 | Mcu.Pin35=PG15 |
---|
118 | Mcu.Pin36=VP_RTC_VS_RTC_Activate |
---|
119 | Mcu.Pin37=VP_SYS_VS_tim7 |
---|
120 | Mcu.Pin38=VP_MEMORYMAP_VS_MEMORYMAP |
---|
121 | Mcu.Pin39=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0 |
---|
122 | Mcu.Pin4=PH1-OSC_OUT |
---|
123 | Mcu.Pin40=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0 |
---|
124 | Mcu.Pin41=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0 |
---|
125 | Mcu.Pin5=PF15 |
---|
126 | Mcu.Pin6=PG0 |
---|
127 | Mcu.Pin7=PG1 |
---|
128 | Mcu.Pin8=PE7 |
---|
129 | Mcu.Pin9=PE11 |
---|
130 | Mcu.PinsNb=42 |
---|
131 | Mcu.ThirdParty0=STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0 |
---|
132 | Mcu.ThirdPartyNb=1 |
---|
133 | Mcu.UserConstants= |
---|
134 | Mcu.UserName=STM32H723ZETx |
---|
135 | MxCube.Version=6.13.0 |
---|
136 | MxDb.Version=DB.6.0.130 |
---|
137 | NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
---|
138 | NVIC.DMA1_Stream0_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true\:true |
---|
139 | NVIC.DMA1_Stream1_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true\:true |
---|
140 | NVIC.DMA1_Stream2_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:true\:true |
---|
141 | NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
---|
142 | NVIC.ForceEnableDMAVector=true |
---|
143 | NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
---|
144 | NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
---|
145 | NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
---|
146 | NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false |
---|
147 | NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 |
---|
148 | NVIC.SDMMC1_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true\:true |
---|
149 | NVIC.SPI4_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true\:true |
---|
150 | NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false |
---|
151 | NVIC.SavedPendsvIrqHandlerGenerated=true |
---|
152 | NVIC.SavedSvcallIrqHandlerGenerated=true |
---|
153 | NVIC.SavedSystickIrqHandlerGenerated=true |
---|
154 | NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:true\:false |
---|
155 | NVIC.TIM7_IRQn=true\:15\:0\:false\:false\:true\:false\:false\:true\:true |
---|
156 | NVIC.TimeBase=TIM7_IRQn |
---|
157 | NVIC.TimeBaseIP=TIM7 |
---|
158 | NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true\:true |
---|
159 | NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false |
---|
160 | PA13(JTMS/SWDIO).Mode=Serial_Wire |
---|
161 | PA13(JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO |
---|
162 | PA14(JTCK/SWCLK).Mode=Serial_Wire |
---|
163 | PA14(JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK |
---|
164 | PA8.GPIOParameters=GPIO_PuPd,GPIO_Label |
---|
165 | PA8.GPIO_Label=SD_DETECT |
---|
166 | PA8.GPIO_PuPd=GPIO_PULLUP |
---|
167 | PA8.Locked=true |
---|
168 | PA8.Signal=GPIO_Input |
---|
169 | PC10.Mode=SD_4_bits_Wide_bus |
---|
170 | PC10.Signal=SDMMC1_D2 |
---|
171 | PC11.Mode=SD_4_bits_Wide_bus |
---|
172 | PC11.Signal=SDMMC1_D3 |
---|
173 | PC12.Mode=SD_4_bits_Wide_bus |
---|
174 | PC12.Signal=SDMMC1_CK |
---|
175 | PC14-OSC32_IN.Mode=LSE-External-Oscillator |
---|
176 | PC14-OSC32_IN.Signal=RCC_OSC32_IN |
---|
177 | PC15-OSC32_OUT.Mode=LSE-External-Oscillator |
---|
178 | PC15-OSC32_OUT.Signal=RCC_OSC32_OUT |
---|
179 | PC8.Locked=true |
---|
180 | PC8.Mode=SD_4_bits_Wide_bus |
---|
181 | PC8.Signal=SDMMC1_D0 |
---|
182 | PC9.Mode=SD_4_bits_Wide_bus |
---|
183 | PC9.Signal=SDMMC1_D1 |
---|
184 | PD10.GPIOParameters=GPIO_Label |
---|
185 | PD10.GPIO_Label=GSM_PWR |
---|
186 | PD10.Locked=true |
---|
187 | PD10.Signal=GPIO_Output |
---|
188 | PD11.Locked=true |
---|
189 | PD11.Signal=USART3_CTS |
---|
190 | PD12.Locked=true |
---|
191 | PD12.Signal=USART3_RTS |
---|
192 | PD13.GPIOParameters=GPIO_Label |
---|
193 | PD13.GPIO_Label=GSM_STATUS |
---|
194 | PD13.Locked=true |
---|
195 | PD13.Signal=GPIO_Input |
---|
196 | PD2.Mode=SD_4_bits_Wide_bus |
---|
197 | PD2.Signal=SDMMC1_CMD |
---|
198 | PD7.GPIOParameters=GPIO_Label |
---|
199 | PD7.GPIO_Label=OUTPUT_ON_LED |
---|
200 | PD7.Locked=true |
---|
201 | PD7.Signal=GPIO_Output |
---|
202 | PD8.Locked=true |
---|
203 | PD8.Mode=Asynchronous |
---|
204 | PD8.Signal=USART3_TX |
---|
205 | PD9.Locked=true |
---|
206 | PD9.Mode=Asynchronous |
---|
207 | PD9.Signal=USART3_RX |
---|
208 | PE11.GPIOParameters=GPIO_Label |
---|
209 | PE11.GPIO_Label=SPI4_NSS_DISPLAY |
---|
210 | PE11.Locked=true |
---|
211 | PE11.Mode=NSS_Signal_Hard_Output |
---|
212 | PE11.Signal=SPI4_NSS |
---|
213 | PE12.GPIOParameters=GPIO_Label |
---|
214 | PE12.GPIO_Label=SPI4_SCK_DISPLAY |
---|
215 | PE12.Locked=true |
---|
216 | PE12.Mode=Simplex_Bidirectional_Master |
---|
217 | PE12.Signal=SPI4_SCK |
---|
218 | PE13.GPIOParameters=GPIO_Label |
---|
219 | PE13.GPIO_Label=PWM_DISPLAY_LIGHT |
---|
220 | PE13.Locked=true |
---|
221 | PE13.Signal=GPIO_Output |
---|
222 | PE14.GPIOParameters=GPIO_Label |
---|
223 | PE14.GPIO_Label=SPI4_MOSI_DISPLAY |
---|
224 | PE14.Locked=true |
---|
225 | PE14.Mode=Simplex_Bidirectional_Master |
---|
226 | PE14.Signal=SPI4_MOSI |
---|
227 | PE15.GPIOParameters=PinState,GPIO_Label |
---|
228 | PE15.GPIO_Label=RST_DISPLAY |
---|
229 | PE15.Locked=true |
---|
230 | PE15.PinState=GPIO_PIN_RESET |
---|
231 | PE15.Signal=GPIO_Output |
---|
232 | PE6.GPIOParameters=GPIO_Label |
---|
233 | PE6.GPIO_Label=TX1_LED |
---|
234 | PE6.Locked=true |
---|
235 | PE6.Signal=GPIO_Output |
---|
236 | PE7.GPIOParameters=GPIO_Label |
---|
237 | PE7.GPIO_Label=POWER_15V_EN |
---|
238 | PE7.Locked=true |
---|
239 | PE7.Signal=GPIO_Output |
---|
240 | PF15.GPIOParameters=GPIO_Label |
---|
241 | PF15.GPIO_Label=POWER_4V_EN |
---|
242 | PF15.Locked=true |
---|
243 | PF15.Signal=GPIO_Output |
---|
244 | PG0.GPIOParameters=GPIO_Label |
---|
245 | PG0.GPIO_Label=POWER_5V_EN |
---|
246 | PG0.Locked=true |
---|
247 | PG0.Signal=GPIO_Output |
---|
248 | PG1.GPIOParameters=GPIO_Label |
---|
249 | PG1.GPIO_Label=POWER_10V_EN |
---|
250 | PG1.Locked=true |
---|
251 | PG1.Signal=GPIO_Output |
---|
252 | PG10.GPIOParameters=GPIO_Label |
---|
253 | PG10.GPIO_Label=CHARGE_LED |
---|
254 | PG10.Locked=true |
---|
255 | PG10.Signal=GPIO_Output |
---|
256 | PG11.GPIOParameters=GPIO_Label |
---|
257 | PG11.GPIO_Label=RX2_LED |
---|
258 | PG11.Locked=true |
---|
259 | PG11.Signal=GPIO_Output |
---|
260 | PG12.GPIOParameters=GPIO_Label |
---|
261 | PG12.GPIO_Label=RX1_LED |
---|
262 | PG12.Locked=true |
---|
263 | PG12.Signal=GPIO_Output |
---|
264 | PG13.GPIOParameters=GPIO_Label |
---|
265 | PG13.GPIO_Label=TX2_LED |
---|
266 | PG13.Locked=true |
---|
267 | PG13.Signal=GPIO_Output |
---|
268 | PG15.GPIOParameters=GPIO_Label |
---|
269 | PG15.GPIO_Label=BUZZER |
---|
270 | PG15.Locked=true |
---|
271 | PG15.Signal=GPIO_Output |
---|
272 | PG9.GPIOParameters=GPIO_Label |
---|
273 | PG9.GPIO_Label=ERROR_LED |
---|
274 | PG9.Locked=true |
---|
275 | PG9.Signal=GPIO_Output |
---|
276 | PH0-OSC_IN.Mode=HSE-External-Oscillator |
---|
277 | PH0-OSC_IN.Signal=RCC_OSC_IN |
---|
278 | PH1-OSC_OUT.Mode=HSE-External-Oscillator |
---|
279 | PH1-OSC_OUT.Signal=RCC_OSC_OUT |
---|
280 | PinOutPanel.RotationAngle=0 |
---|
281 | ProjectManager.AskForMigrate=true |
---|
282 | ProjectManager.BackupPrevious=false |
---|
283 | ProjectManager.CompilerOptimize=6 |
---|
284 | ProjectManager.ComputerToolchain=false |
---|
285 | ProjectManager.CoupleFile=true |
---|
286 | ProjectManager.CustomerFirmwarePackage= |
---|
287 | ProjectManager.DefaultFWLocation=true |
---|
288 | ProjectManager.DeletePrevious=true |
---|
289 | ProjectManager.DeviceId=STM32H723ZETx |
---|
290 | ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.12.1 |
---|
291 | ProjectManager.FreePins=true |
---|
292 | ProjectManager.HalAssertFull=true |
---|
293 | ProjectManager.HeapSize=0x200 |
---|
294 | ProjectManager.KeepUserCode=true |
---|
295 | ProjectManager.LastFirmware=true |
---|
296 | ProjectManager.LibraryCopy=1 |
---|
297 | ProjectManager.MainLocation=Core/Src |
---|
298 | ProjectManager.NoMain=false |
---|
299 | ProjectManager.PreviousToolchain=STM32CubeIDE |
---|
300 | ProjectManager.ProjectBuild=false |
---|
301 | ProjectManager.ProjectFileName=charger.ioc |
---|
302 | ProjectManager.ProjectName=charger |
---|
303 | ProjectManager.ProjectStructure= |
---|
304 | ProjectManager.RegisterCallBack= |
---|
305 | ProjectManager.StackSize=0x400 |
---|
306 | ProjectManager.TargetToolchain=STM32CubeIDE |
---|
307 | ProjectManager.ToolChainLocation= |
---|
308 | ProjectManager.UAScriptAfterPath= |
---|
309 | ProjectManager.UAScriptBeforePath= |
---|
310 | ProjectManager.UnderRoot=true |
---|
311 | ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-MX_USART3_UART_Init-USART3-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true |
---|
312 | RCC.ADCFreq_Value=166666666.66666666 |
---|
313 | RCC.AHB12Freq_Value=100000000 |
---|
314 | RCC.AHB4Freq_Value=100000000 |
---|
315 | RCC.APB1Freq_Value=100000000 |
---|
316 | RCC.APB2Freq_Value=100000000 |
---|
317 | RCC.APB3Freq_Value=100000000 |
---|
318 | RCC.APB4Freq_Value=100000000 |
---|
319 | RCC.AXIClockFreq_Value=100000000 |
---|
320 | RCC.CECFreq_Value=32000 |
---|
321 | RCC.CKPERFreq_Value=64000000 |
---|
322 | RCC.CortexFreq_Value=100000000 |
---|
323 | RCC.CpuClockFreq_Value=100000000 |
---|
324 | RCC.D1CPREFreq_Value=100000000 |
---|
325 | RCC.DFSDMACLkFreq_Value=50000000 |
---|
326 | RCC.DFSDMFreq_Value=100000000 |
---|
327 | RCC.DIVM1=5 |
---|
328 | RCC.DIVM2=3 |
---|
329 | RCC.DIVM3=25 |
---|
330 | RCC.DIVN1=40 |
---|
331 | RCC.DIVN2=40 |
---|
332 | RCC.DIVN3=200 |
---|
333 | RCC.DIVP1Freq_Value=100000000 |
---|
334 | RCC.DIVP2Freq_Value=166666666.66666666 |
---|
335 | RCC.DIVP3Freq_Value=100000000 |
---|
336 | RCC.DIVQ1=4 |
---|
337 | RCC.DIVQ1Freq_Value=50000000 |
---|
338 | RCC.DIVQ2=11 |
---|
339 | RCC.DIVQ2Freq_Value=30303030.3030303 |
---|
340 | RCC.DIVQ3=8 |
---|
341 | RCC.DIVQ3Freq_Value=25000000 |
---|
342 | RCC.DIVR1Freq_Value=100000000 |
---|
343 | RCC.DIVR2=10 |
---|
344 | RCC.DIVR2Freq_Value=33333333.333333332 |
---|
345 | RCC.DIVR3Freq_Value=100000000 |
---|
346 | RCC.FDCANFreq_Value=50000000 |
---|
347 | RCC.FMCFreq_Value=100000000 |
---|
348 | RCC.FamilyName=M |
---|
349 | RCC.HCLK3ClockFreq_Value=100000000 |
---|
350 | RCC.HCLKFreq_Value=100000000 |
---|
351 | RCC.I2C123Freq_Value=100000000 |
---|
352 | RCC.I2C4Freq_Value=100000000 |
---|
353 | RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Spi45ClockSelection,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value |
---|
354 | RCC.LPTIM1Freq_Value=100000000 |
---|
355 | RCC.LPTIM2Freq_Value=100000000 |
---|
356 | RCC.LPTIM345Freq_Value=100000000 |
---|
357 | RCC.LPUART1Freq_Value=100000000 |
---|
358 | RCC.LTDCFreq_Value=100000000 |
---|
359 | RCC.MCO1PinFreq_Value=64000000 |
---|
360 | RCC.MCO2PinFreq_Value=100000000 |
---|
361 | RCC.PLL2FRACN=0 |
---|
362 | RCC.PLLFRACN=0 |
---|
363 | RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE |
---|
364 | RCC.QSPIFreq_Value=100000000 |
---|
365 | RCC.RNGFreq_Value=48000000 |
---|
366 | RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE |
---|
367 | RCC.RTCFreq_Value=32768 |
---|
368 | RCC.SAI1Freq_Value=50000000 |
---|
369 | RCC.SAI4AFreq_Value=50000000 |
---|
370 | RCC.SAI4BFreq_Value=50000000 |
---|
371 | RCC.SDMMCFreq_Value=50000000 |
---|
372 | RCC.SPDIFRXFreq_Value=50000000 |
---|
373 | RCC.SPI123Freq_Value=50000000 |
---|
374 | RCC.SPI45Freq_Value=25000000 |
---|
375 | RCC.SPI6Freq_Value=100000000 |
---|
376 | RCC.SWPMI1Freq_Value=100000000 |
---|
377 | RCC.SYSCLKFreq_VALUE=100000000 |
---|
378 | RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK |
---|
379 | RCC.Spi45ClockSelection=RCC_SPI45CLKSOURCE_HSE |
---|
380 | RCC.Tim1OutputFreq_Value=100000000 |
---|
381 | RCC.Tim2OutputFreq_Value=100000000 |
---|
382 | RCC.TraceFreq_Value=100000000 |
---|
383 | RCC.USART16Freq_Value=100000000 |
---|
384 | RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL3 |
---|
385 | RCC.USART234578Freq_Value=25000000 |
---|
386 | RCC.USBFreq_Value=50000000 |
---|
387 | RCC.VCO1OutputFreq_Value=200000000 |
---|
388 | RCC.VCO2OutputFreq_Value=333333333.3333333 |
---|
389 | RCC.VCO3OutputFreq_Value=200000000 |
---|
390 | RCC.VCOInput1Freq_Value=5000000 |
---|
391 | RCC.VCOInput2Freq_Value=8333333.333333333 |
---|
392 | RCC.VCOInput3Freq_Value=1000000 |
---|
393 | SDMMC1.ClockPowerSave=SDMMC_CLOCK_POWER_SAVE_ENABLE |
---|
394 | SDMMC1.HardwareFlowControl=SDMMC_HARDWARE_FLOW_CONTROL_ENABLE |
---|
395 | SDMMC1.IPParameters=ClockPowerSave,HardwareFlowControl |
---|
396 | SPI4.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_4 |
---|
397 | SPI4.CalculateBaudRate=6.25 MBits/s |
---|
398 | SPI4.DataSize=SPI_DATASIZE_9BIT |
---|
399 | SPI4.Direction=SPI_DIRECTION_1LINE |
---|
400 | SPI4.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,DataSize,BaudRatePrescaler |
---|
401 | SPI4.Mode=SPI_MODE_MASTER |
---|
402 | SPI4.VirtualNSS=VM_NSSHARD |
---|
403 | SPI4.VirtualType=VM_MASTER |
---|
404 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_APP_MEM_POOL_SIZE=8192 |
---|
405 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_DRIVER_SD_INIT=1 |
---|
406 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_ENABLE_EXFAT=1 |
---|
407 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_ENABLE_FAULT_TOLERANT=1 |
---|
408 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_FAULT_TOLERANT=1 |
---|
409 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FX_FAULT_TOLERANT_DATA=1 |
---|
410 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FileOoSystemJjFileX_Checked=true |
---|
411 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FileOoSystemJjInterfaces_Checked=true |
---|
412 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.FileXCcFileOoSystemJjFileXJjCore=true |
---|
413 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.IPParameters=TX_APP_MEM_POOL_SIZE,FX_APP_MEM_POOL_SIZE,TX_APP_GENERATE_INIT_CODE,TX_APP_CREATION,TX_ENABLE_STACK_CHECKING,TX_NO_FILEX_POINTER,TX_LOW_POWER,FX_ENABLE_EXFAT,FX_ENABLE_FAULT_TOLERANT,FX_FAULT_TOLERANT,FX_FAULT_TOLERANT_DATA,FX_DRIVER_SD_INIT,TX_TIMER_TICKS_PER_SECOND,ThreadXCcRTOSJjThreadXJjCore,ThreadXCcRTOSJjThreadXJjLowOoPowerOosupport,FileXCcFileOoSystemJjFileXJjCore,InterfacesCcFileOoSystemJjFileXOoSDOointerface,TX_APP_MSG_QUEUE_CREATION,TX_MSG_QUEUE_NAME,TX_NB_MSG |
---|
414 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.InterfacesCcFileOoSystemJjFileXOoSDOointerface=true |
---|
415 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.RTOSJjThreadX_Checked=true |
---|
416 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_CREATION=0 |
---|
417 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_GENERATE_INIT_CODE=false |
---|
418 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_MEM_POOL_SIZE=8192 |
---|
419 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_APP_MSG_QUEUE_CREATION=1 |
---|
420 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_ENABLE_STACK_CHECKING=1 |
---|
421 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_LOW_POWER=1 |
---|
422 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_MSG_QUEUE_NAME=gsm queue |
---|
423 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_NB_MSG=512 |
---|
424 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_NO_FILEX_POINTER=1 |
---|
425 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.TX_TIMER_TICKS_PER_SECOND=1000 |
---|
426 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.ThreadXCcRTOSJjThreadXJjCore=true |
---|
427 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0.ThreadXCcRTOSJjThreadXJjLowOoPowerOosupport=true |
---|
428 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0_IsAnAzureRtosMw=true |
---|
429 | STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0_SwParameter=InterfacesCcFileOoSystemJjFileXOoSDOointerface\:true;ThreadXCcRTOSJjThreadXJjLowOoPowerOosupport\:true;FileXCcFileOoSystemJjFileXJjCore\:true;ThreadXCcRTOSJjThreadXJjCore\:true; |
---|
430 | USART3.DMADisableonRxErrorParam=ADVFEATURE_DMA_DISABLEONRXERROR |
---|
431 | USART3.IPParameters=VirtualMode-Asynchronous,SwapParam,DMADisableonRxErrorParam |
---|
432 | USART3.SwapParam=ADVFEATURE_SWAP_ENABLE |
---|
433 | USART3.VirtualMode-Asynchronous=VM_ASYNC |
---|
434 | VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg |
---|
435 | VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP |
---|
436 | VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled |
---|
437 | VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate |
---|
438 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0.Mode=FileOoSystemJjFileX |
---|
439 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0.Signal=STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0 |
---|
440 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0.Mode=FileOoSystemJjInterfaces |
---|
441 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0.Signal=STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0 |
---|
442 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0.Mode=RTOSJjThreadX |
---|
443 | VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0.Signal=STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0 |
---|
444 | VP_SYS_VS_tim7.Mode=TIM7 |
---|
445 | VP_SYS_VS_tim7.Signal=SYS_VS_tim7 |
---|
446 | board=custom |
---|