Ignore:
Timestamp:
Dec 5, 2024, 1:46:10 PM (6 weeks ago)
Author:
Zed
Message:

Backlight was turned on for Display.

File:
1 edited

Legend:

Unmodified
Added
Removed
  • ctrl/firmware/Main/CubeMX/charger.ioc

    r47 r48  
    2828Dma.SPI4_TX.0.SyncSignalID=NONE
    2929File.Version=6
    30 GPIO.groupedBy=
     30GPIO.groupedBy=Group By Peripherals
    3131KeepUserPlacement=false
    3232MMTAppRegionsCount=0
     
    3535Mcu.Family=STM32H7
    3636Mcu.IP0=CORTEX_M7
    37 Mcu.IP1=DMA
    38 Mcu.IP2=MEMORYMAP
    39 Mcu.IP3=NVIC
    40 Mcu.IP4=RCC
    41 Mcu.IP5=RTC
    42 Mcu.IP6=SPI4
    43 Mcu.IP7=SYS
    44 Mcu.IPNb=8
     37Mcu.IP1=DEBUG
     38Mcu.IP2=DMA
     39Mcu.IP3=MEMORYMAP
     40Mcu.IP4=NVIC
     41Mcu.IP5=RCC
     42Mcu.IP6=RTC
     43Mcu.IP7=SPI4
     44Mcu.IP8=SYS
     45Mcu.IPNb=9
    4546Mcu.Name=STM32H723ZETx
    4647Mcu.Package=LQFP144
    4748Mcu.Pin0=PC14-OSC32_IN
    4849Mcu.Pin1=PC15-OSC32_OUT
     50Mcu.Pin10=PA14(JTCK/SWCLK)
     51Mcu.Pin11=VP_RTC_VS_RTC_Activate
     52Mcu.Pin12=VP_SYS_VS_Systick
     53Mcu.Pin13=VP_MEMORYMAP_VS_MEMORYMAP
    4954Mcu.Pin2=PH0-OSC_IN
    5055Mcu.Pin3=PH1-OSC_OUT
    5156Mcu.Pin4=PE11
    5257Mcu.Pin5=PE12
    53 Mcu.Pin6=PE14
    54 Mcu.Pin7=VP_RTC_VS_RTC_Activate
    55 Mcu.Pin8=VP_SYS_VS_Systick
    56 Mcu.Pin9=VP_MEMORYMAP_VS_MEMORYMAP
    57 Mcu.PinsNb=10
     58Mcu.Pin6=PE13
     59Mcu.Pin7=PE14
     60Mcu.Pin8=PE15
     61Mcu.Pin9=PA13(JTMS/SWDIO)
     62Mcu.PinsNb=14
    5863Mcu.ThirdPartyNb=0
    5964Mcu.UserConstants=
     
    7479NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
    7580NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
     81PA13(JTMS/SWDIO).Mode=Serial_Wire
     82PA13(JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO
     83PA14(JTCK/SWCLK).Mode=Serial_Wire
     84PA14(JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK
    7685PC14-OSC32_IN.Mode=LSE-External-Oscillator
    7786PC14-OSC32_IN.Signal=RCC_OSC32_IN
     
    8695PE12.GPIO_Label=SPI4_SCK_DISPLAY
    8796PE12.Locked=true
    88 PE12.Mode=Simplex_Bidirectional_Master
     97PE12.Mode=TX_Only_Simplex_Unidirect_Master
    8998PE12.Signal=SPI4_SCK
     99PE13.GPIOParameters=GPIO_Label
     100PE13.GPIO_Label=PWM_DISPLAY_LIGHT
     101PE13.Locked=true
     102PE13.Signal=GPIO_Output
    90103PE14.GPIOParameters=GPIO_Label
    91104PE14.GPIO_Label=SPI4_MOSI_DISPLAY
    92105PE14.Locked=true
    93 PE14.Mode=Simplex_Bidirectional_Master
     106PE14.Mode=TX_Only_Simplex_Unidirect_Master
    94107PE14.Signal=SPI4_MOSI
     108PE15.GPIOParameters=PinState,GPIO_Label
     109PE15.GPIO_Label=RST_DISPLAY
     110PE15.Locked=true
     111PE15.PinState=GPIO_PIN_RESET
     112PE15.Signal=GPIO_Output
    95113PH0-OSC_IN.Mode=HSE-External-Oscillator
    96114PH0-OSC_IN.Signal=RCC_OSC_IN
     
    196214RCC.Tim1OutputFreq_Value=100000000
    197215RCC.Tim2OutputFreq_Value=100000000
    198 RCC.TraceFreq_Value=64000000
     216RCC.TraceFreq_Value=100000000
    199217RCC.USART16Freq_Value=100000000
    200218RCC.USART234578Freq_Value=100000000
     
    209227SPI4.CalculateBaudRate=15.151515 MBits/s
    210228SPI4.DataSize=SPI_DATASIZE_9BIT
    211 SPI4.Direction=SPI_DIRECTION_1LINE
     229SPI4.Direction=SPI_DIRECTION_2LINES_TXONLY
    212230SPI4.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS,DataSize,BaudRatePrescaler
    213231SPI4.Mode=SPI_MODE_MASTER
Note: See TracChangeset for help on using the changeset viewer.