Changeset 58 for ctrl/firmware/Main/CubeMX/charger.ioc

Timestamp:

Dec 13, 2024, 8:38:16 AM (5 weeks ago)

Author:

Zed

Message:

POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.

File:

• ctrl/firmware/Main/CubeMX/charger.ioc (modified) (2 diffs)

ctrl/firmware/Main/CubeMX/charger.ioc

@@ -49 +49 @@
 Mcu.Pin0=PE6
 Mcu.Pin1=PC14-OSC32_IN
-Mcu.Pin10=PC8
-Mcu.Pin11=PC9
-Mcu.Pin12=PA8
-Mcu.Pin13=PA13(JTMS/SWDIO)
-Mcu.Pin14=PA14(JTCK/SWCLK)
-Mcu.Pin15=PC10
-Mcu.Pin16=PC11
-Mcu.Pin17=PC12
-Mcu.Pin18=PD2
-Mcu.Pin19=PD7
+Mcu.Pin10=PE12
+Mcu.Pin11=PE13
+Mcu.Pin12=PE14
+Mcu.Pin13=PE15
+Mcu.Pin14=PC8
+Mcu.Pin15=PC9
+Mcu.Pin16=PA8
+Mcu.Pin17=PA13(JTMS/SWDIO)
+Mcu.Pin18=PA14(JTCK/SWCLK)
+Mcu.Pin19=PC10
 Mcu.Pin2=PC15-OSC32_OUT
-Mcu.Pin20=PG9
-Mcu.Pin21=PG10
-Mcu.Pin22=PG11
-Mcu.Pin23=PG12
-Mcu.Pin24=PG13
-Mcu.Pin25=VP_RTC_VS_RTC_Activate
-Mcu.Pin26=VP_SYS_VS_tim7
-Mcu.Pin27=VP_MEMORYMAP_VS_MEMORYMAP
-Mcu.Pin28=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0
-Mcu.Pin29=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0
+Mcu.Pin20=PC11
+Mcu.Pin21=PC12
+Mcu.Pin22=PD2
+Mcu.Pin23=PD7
+Mcu.Pin24=PG9
+Mcu.Pin25=PG10
+Mcu.Pin26=PG11
+Mcu.Pin27=PG12
+Mcu.Pin28=PG13
+Mcu.Pin29=VP_RTC_VS_RTC_Activate
 Mcu.Pin3=PH0-OSC_IN
-Mcu.Pin30=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0
+Mcu.Pin30=VP_SYS_VS_tim7
+Mcu.Pin31=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin32=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_RTOSJjThreadX_6.4.0_3.3.0
+Mcu.Pin33=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjFileX_6.4.0_3.3.0
+Mcu.Pin34=VP_STMicroelectronics.X-CUBE-AZRTOS-H7_VS_FileOoSystemJjInterfaces_3.3.0_3.3.0
 Mcu.Pin4=PH1-OSC_OUT
-Mcu.Pin5=PE11
-Mcu.Pin6=PE12
-Mcu.Pin7=PE13
-Mcu.Pin8=PE14
-Mcu.Pin9=PE15
-Mcu.PinsNb=31
+Mcu.Pin5=PF15
+Mcu.Pin6=PG0
+Mcu.Pin7=PG1
+Mcu.Pin8=PE7
+Mcu.Pin9=PE11
+Mcu.PinsNb=35
 Mcu.ThirdParty0=STMicroelectronics.X-CUBE-AZRTOS-H7.3.3.0
 Mcu.ThirdPartyNb=1
@@ -163 +167 @@
 PE6.Locked=true
 PE6.Signal=GPIO_Output
+PE7.GPIOParameters=GPIO_Label
+PE7.GPIO_Label=POWER_15V_EN
+PE7.Locked=true
+PE7.Signal=GPIO_Output
+PF15.GPIOParameters=GPIO_Label
+PF15.GPIO_Label=POWER_4V_EN
+PF15.Locked=true
+PF15.Signal=GPIO_Output
+PG0.GPIOParameters=GPIO_Label
+PG0.GPIO_Label=POWER_5V_EN
+PG0.Locked=true
+PG0.Signal=GPIO_Output
+PG1.GPIOParameters=GPIO_Label
+PG1.GPIO_Label=POWER_10V_EN
+PG1.Locked=true
+PG1.Signal=GPIO_Output
 PG10.GPIOParameters=GPIO_Label
 PG10.GPIO_Label=CHARGE_LED