|
|
|
@89
|
6 months |
Zed |
Added basic I2C EEPROM support.
|
|
|
|
@88
|
6 months |
Zed |
BME280 data transfer works ok. Device returns its ID 0x60.
|
|
|
|
@87
|
6 months |
Zed |
RTC is working.
|
|
|
|
@84
|
6 months |
Zed |
Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
|
|
|
|
@83
|
6 months |
Zed |
Modbus Master and Slave Hardware were tested.
|
|
|
|
@82
|
6 months |
Zed |
DMA transfer to µSD-card was implemented.
|
|
|
|
@80
|
6 months |
Zed |
Added main SYS_DATA structure.
|
|
|
|
@79
|
6 months |
Zed |
DHCP client can get IP-address from fritz!box
|
|
|
|
@78
|
6 months |
Zed |
Fixing project to enable DMA for SPI2.
|
|
|
|
@77
|
6 months |
Zed |
LwIP was removed from the project.
|
|
|
|
@76
|
7 months |
Zed |
Fixing project before changing NSS control for SPI2 in CubeMX.
|
|
|
|
@75
|
7 months |
Zed |
FatFs? is working, but without DMA.
|
|
|
|
@74
|
7 months |
Zed |
FatFs? with DMA were implemented.
|
|
|
|
@73
|
7 months |
Zed |
FreeRTOS can be compiled without errors.
|
|
|
|
@71
|
7 months |
Zed |
Fixing project before adding support for FreeRTOS.
|
|
|
|
@69
|
7 months |
Zed |
NetX can be compiled and initialized.
|
|
|
|
@68
|
7 months |
Zed |
Fixing project before Ethernet implementation.
|
|
|
|
@67
|
7 months |
Zed |
FAN TACHO RPM was moved changed to use interrupt.
|
|
|
|
@66
|
7 months |
Zed |
FAN PWM control and TACHO signal measuring are working.
|
|
|
|
@65
|
7 months |
Zed |
GSM, USB, BLE and GPS are working.
|
|
|
|
@63
|
7 months |
Zed |
Fixing project.
|
|
|
|
@61
|
7 months |
Zed |
GSM thread was added.
|
|
|
|
@57
|
8 months |
Zed |
FileX is working.
|
|
|
|
@56
|
8 months |
Zed |
Tick rate was changed to 1000 in CubeMX.
|
|
|
|
@55
|
8 months |
Zed |
Can be compiled without errors. Fixing before changing tick rate to …
|
|
|
|
@54
|
8 months |
Zed |
SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
|
|
|
|
@51
|
8 months |
Zed |
SDMMC low level driver was added.
|
|
|
|
@48
|
9 months |
Zed |
Backlight was turned on for Display.
|
|
|
|
@47
|
9 months |
Zed |
|
|
|
|
@46
|
9 months |
Zed |
|
|
|
|
@45
|
9 months |
Zed |
Added SPI module for Display.
|
|
|
|
@44
|
9 months |
Zed |
|
|
|
|
@43
|
9 months |
Zed |
|
|
|
|
@42
|
9 months |
Zed |
|
|
|
|
@41
|
9 months |
Zed |
|
|
|
|
@37
|
9 months |
Zed |
|
|
|
|
@36
|
9 months |
Zed |
|
|
|
|
@35
|
9 months |
Zed |
|
|
|
|
@34
|
9 months |
Zed |
|
|
|
|
@33
|
9 months |
Zed |
|
|
|
|
@32
|
9 months |
Zed |
|
|
|
|
@31
|
9 months |
Zed |
|
|
|
|
@15
|
9 months |
Zed |
|
|
|
|
@13
|
9 months |
Zed |
Forgot to add to the project these files.
|
|
|
|
@11
|
9 months |
Zed |
|
|
|
|
@10
|
9 months |
Zed |
Added SEGGER project files.
|
