source: ctrl/firmware/Main/SES/charger.emProject

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @77   11 months Zed LwIP was removed from the project.
(edit) @76   12 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   12 months Zed FatFs is working, but without DMA.
(edit) @74   12 months Zed FatFs with DMA were implemented.
(edit) @73   12 months Zed FreeRTOS can be compiled without errors.
(edit) @71   12 months Zed Fixing project before adding support for FreeRTOS.
(edit) @69   12 months Zed NetX can be compiled and initialized.
(edit) @68   12 months Zed Fixing project before Ethernet implementation.
(edit) @67   12 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   12 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   12 months Zed GSM, USB, BLE and GPS are working.
(edit) @63   12 months Zed Fixing project.
(edit) @61   12 months Zed GSM thread was added.
(edit) @57   13 months Zed FileX is working.
(edit) @56   13 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   13 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   13 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @51   13 months Zed SDMMC low level driver was added.
(edit) @48   13 months Zed Backlight was turned on for Display.
(edit) @47   14 months Zed
(edit) @46   14 months Zed
(edit) @45   14 months Zed Added SPI module for Display.
(edit) @44   14 months Zed
(edit) @43   14 months Zed
(edit) @42   14 months Zed
(edit) @41   14 months Zed
(edit) @37   14 months Zed
(edit) @36   14 months Zed
(edit) @35   14 months Zed
(edit) @34   14 months Zed
(edit) @33   14 months Zed
(edit) @32   14 months Zed
(edit) @31   14 months Zed
(edit) @15   14 months Zed
(edit) @13   14 months Zed Forgot to add to the project these files.
(edit) @11   14 months Zed
(add) @10   14 months Zed Added SEGGER project files.
Note: See TracRevisionLog for help on using the revision log.