Changeset 39 for trunk/firmware/App/CubeMX/blto2_App.ioc

Timestamp:

Oct 20, 2026, 5:18:04 PM (2 weeks ago)

Author:

Zed

Message:

Synced more CubeMX settings for main App with ST's Fx_uSD example for STM32N6570-DK board.

File:

• trunk/firmware/App/CubeMX/blto2_App.ioc (modified) (5 diffs)

trunk/firmware/App/CubeMX/blto2_App.ioc

@@ -159 +159 @@
 PB5(JTDO/TRACESWO).PinAttribute=Appli
 PB5(JTDO/TRACESWO).Signal=DEBUG_JTDO-SWO
-PC0.GPIOParameters=PinAttribute
+PC0.GPIOParameters=GPIO_Speed_Medium_Default,PinAttribute
+PC0.GPIO_Speed_Medium_Default=GPIO_SPEED_FREQ_VERY_HIGH
 PC0.Mode=SD_4_bits_Wide_bus
 PC0.PinAttribute=Appli
@@ -168 +169 @@
 PC2.PinAttribute=Appli
 PC2.Signal=SDMMC2_CK
-PC3.GPIOParameters=PinAttribute
+PC3.GPIOParameters=GPIO_Speed_Medium_Default,PinAttribute
+PC3.GPIO_Speed_Medium_Default=GPIO_SPEED_FREQ_VERY_HIGH
 PC3.Mode=SD_4_bits_Wide_bus
 PC3.PinAttribute=Appli
 PC3.Signal=SDMMC2_CMD
-PC4.GPIOParameters=PinAttribute
+PC4.GPIOParameters=GPIO_Speed_Medium_Default,PinAttribute
+PC4.GPIO_Speed_Medium_Default=GPIO_SPEED_FREQ_VERY_HIGH
 PC4.Mode=SD_4_bits_Wide_bus
 PC4.PinAttribute=Appli
 PC4.Signal=SDMMC2_D0
-PC5.GPIOParameters=PinAttribute
+PC5.GPIOParameters=GPIO_Speed_Medium_Default,PinAttribute
+PC5.GPIO_Speed_Medium_Default=GPIO_SPEED_FREQ_VERY_HIGH
 PC5.Mode=SD_4_bits_Wide_bus
 PC5.PinAttribute=Appli
@@ -191 +195 @@
 PCC.Temperature=25
 PCC.Vdd=1.8
-PE4.GPIOParameters=PinAttribute
+PE4.GPIOParameters=GPIO_Speed_Medium_Default,PinAttribute
+PE4.GPIO_Speed_Medium_Default=GPIO_SPEED_FREQ_VERY_HIGH
 PE4.Mode=SD_4_bits_Wide_bus
 PE4.PinAttribute=Appli
@@ -254 +259 @@
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-true-HAL-false-FSBL,1-MX_GPIO_Init-GPIO-false-HAL-true-Appli,2-MX_BSEC_Init-BSEC-false-HAL-true-Appli,3-MX_SDMMC2_SD_Init-SDMMC2-false-HAL-true-Appli,4-SystemIsolation_Config-RIF-false-HAL-true-Appli,0-MX_CORTEX_M55_FSBL_Init-CORTEX_M55_FSBL-false-HAL-true-FSBL,0-MX_CORTEX_M55_S_Init-CORTEX_M55_S-false-HAL-true-Appli
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-true-HAL-false-FSBL,2-MX_GPIO_Init-GPIO-false-HAL-true-FSBL,1-MX_GPIO_Init-GPIO-false-HAL-true-Appli,2-MX_BSEC_Init-BSEC-false-HAL-true-Appli,3-MX_SDMMC2_SD_Init-SDMMC2-false-HAL-true-Appli,4-SystemIsolation_Config-RIF-false-HAL-true-Appli,0-MX_CORTEX_M55_FSBL_Init-CORTEX_M55_FSBL-false-HAL-true-FSBL,0-MX_CORTEX_M55_S_Init-CORTEX_M55_S-false-HAL-true-Appli,1-MX_GPIO_Init-GPIO-false-HAL-true-ExtMemLoader
 RCC.ADC12Freq_Value=200000000
 RCC.ADFFreq_Value=200000000
@@ -926 +931 @@
 RIF.RIFAWARE.RTC\ Feature\ Wake-up\ timer\ protection\ Cid=-
 RIF.RIFAWARE.RTC\ Feature\ Wake-up\ timer\ protection\ Secure=false
+RIF.RISUP.SDMMC2.Privilege=true
 RIF.SDMMC1_CID_RIMU=0
 RIF.SDMMC2_CID_RIMU=1