Changeset 31 for trunk/firmware/App/CubeMX/blto2_App.ioc

Timestamp:

Oct 15, 2026, 8:54:58 AM (3 weeks ago)

Author:

Zed

Message:

FileX support was removed from CubeMX, because it is not well supported. Going to use ST's example from GitHub instead.

File:

• trunk/firmware/App/CubeMX/blto2_App.ioc (modified) (6 diffs)

trunk/firmware/App/CubeMX/blto2_App.ioc

@@ -1 +1 @@
 #MicroXplorer Configuration settings - do not modify
-Appli.IPs=CORTEX_M55_S,GPDMA1,HPDMA1,LINKEDLIST,RCC,RIF,SAU,GPIO,NVIC1\:I,BSEC,DEBUG,STMicroelectronics.X-CUBE-FREERTOS.1.6.0_Appli\:I,SYS_S\:I,SDMMC2,FILEX
+Appli.IPs=CORTEX_M55_S,GPDMA1,HPDMA1,LINKEDLIST,RCC,RIF,SAU,GPIO,NVIC1\:I,BSEC,DEBUG,STMicroelectronics.X-CUBE-FREERTOS.1.6.0_Appli\:I,SYS_S\:I,SDMMC2
 Appli.Pins=PQ7,PO5,PO1,PN12
 CAD.formats=
@@ -19 +19 @@
 CORTEX_M55_S.MPU_Control=MPU_HFNMI_PRIVDEF
 ExtMemLoader.IPs=EXTMEM_LOADER,EXTMEM_MANAGER,RCC\:I,GPIO
-FILEX.ENABLE_CACHE_MAINTENANCE=true
-FILEX.FX_CUSTOM_INTERFACE=1
-FILEX.FX_SD_INTERFACE=1
-FILEX.IPParameters=FX_SD_INTERFACE,FX_CUSTOM_INTERFACE,ENABLE_CACHE_MAINTENANCE
 FSBL.IPs=CORTEX_M55_FSBL,GPDMA1\:I,HDP,HPDMA1\:I,LINKEDLIST,RCC,GPIO\:I,NVIC\:I,MEMORYMAP
 File.Version=6
@@ -77 +73 @@
 Mcu.IP0=BSEC
 Mcu.IP1=CORTEX_M55_FSBL
-Mcu.IP10=SDMMC2
-Mcu.IP11=SYS_S
+Mcu.IP10=SYS_S
 Mcu.IP2=CORTEX_M55_S
 Mcu.IP3=DEBUG
-Mcu.IP4=FILEX
-Mcu.IP5=MEMORYMAP
-Mcu.IP6=NVIC1
-Mcu.IP7=NVIC
-Mcu.IP8=RCC
-Mcu.IP9=RIF
-Mcu.IPNb=12
+Mcu.IP4=MEMORYMAP
+Mcu.IP5=NVIC1
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=RIF
+Mcu.IP9=SDMMC2
+Mcu.IPNb=11
 Mcu.Name=STM32N657X0HxQ
 Mcu.Package=VFBGA264
@@ -96 +91 @@
 Mcu.Pin12=PB5(JTDO/TRACESWO)
 Mcu.Pin13=VP_BSEC_VS_BSEC
-Mcu.Pin14=VP_FILEX_VS_FileOoSystemJjFileXJjCore
-Mcu.Pin15=VP_FILEX_VS_SDOointerface
-Mcu.Pin16=VP_FILEX_VS_CustomOointerface
-Mcu.Pin17=VP_RIF_VS_RIF1
-Mcu.Pin18=VP_SYS_S_VS_Systick
-Mcu.Pin19=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin14=VP_RIF_VS_RIF1
+Mcu.Pin15=VP_SYS_S_VS_Systick
+Mcu.Pin16=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin17=VP_STMicroelectronics.X-CUBE-FREERTOS_Appli_VS_CMSISJjRTOS2_11.2.0_1.6.0
 Mcu.Pin2=PC0
-Mcu.Pin20=VP_STMicroelectronics.X-CUBE-FREERTOS_Appli_VS_CMSISJjRTOS2_11.2.0_1.6.0
 Mcu.Pin3=PD2
 Mcu.Pin4=PE4
@@ -111 +103 @@
 Mcu.Pin8=PO1
 Mcu.Pin9=PN12
-Mcu.PinsNb=21
+Mcu.PinsNb=18
 Mcu.ThirdParty0=STMicroelectronics.X-CUBE-FREERTOS.1.6.0
 Mcu.ThirdParty0_ContextShortName=Appli
@@ -950 +942 @@
 VP_BSEC_VS_BSEC.Mode=BSEC_Activate
 VP_BSEC_VS_BSEC.Signal=BSEC_VS_BSEC
-VP_FILEX_VS_CustomOointerface.Mode=Custom_interface
-VP_FILEX_VS_CustomOointerface.Signal=FILEX_VS_CustomOointerface
-VP_FILEX_VS_FileOoSystemJjFileXJjCore.Mode=FileX_Core
-VP_FILEX_VS_FileOoSystemJjFileXJjCore.Signal=FILEX_VS_FileOoSystemJjFileXJjCore
-VP_FILEX_VS_SDOointerface.Mode=SD_interface
-VP_FILEX_VS_SDOointerface.Signal=FILEX_VS_SDOointerface
 VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg
 VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP