source: ecs_cellMon/firmware/startup/startup_stm32g071xx.s @ 3

Last change on this file since 3 was 3, checked in by f.jahn, 20 months ago

fw hinzugfügt-->zed
File size: 9.9 KB
RevLine 
[3]1/**
2  ******************************************************************************
3  * @file      startup_stm32g071xx.s
4  * @author    MCD Application Team
5  * @brief     STM32G071xx devices vector table GCC toolchain.
6  *            This module performs:
7  *                - Set the initial SP
8  *                - Set the initial PC == Reset_Handler,
9  *                - Set the vector table entries with the exceptions ISR address
10  *                - Branches to main in the C library (which eventually
11  *                  calls main()).
12  *            After Reset the Cortex-M0+ processor is in Thread mode,
13  *            priority is Privileged, and the Stack is set to Main.
14  ******************************************************************************
15  * @attention
16  *
17  * Copyright (c) 2018 STMicroelectronics. All rights reserved.
18  *
19  * This software component is licensed by ST under Apache License, Version 2.0,
20  * the "License"; You may not use this file except in compliance with the
21  * License. You may obtain a copy of the License at:
22  *                        opensource.org/licenses/Apache-2.0
23  *
24  ******************************************************************************
25  */
26
27.syntax unified
28.cpu cortex-m0plus
29.fpu softvfp
30.thumb
31
32.global g_pfnVectors
33.global Default_Handler
34
35/* start address for the initialization values of the .data section.
36defined in linker script */
37.word _sidata
38/* start address for the .data section. defined in linker script */
39.word _sdata
40/* end address for the .data section. defined in linker script */
41.word _edata
42/* start address for the .bss section. defined in linker script */
43.word _sbss
44/* end address for the .bss section. defined in linker script */
45.word _ebss
46
47/**
48 * @brief  This is the code that gets called when the processor first
49 *          starts execution following a reset event. Only the absolutely
50 *          necessary set is performed, after which the application
51 *          supplied main() routine is called.
52 * @param  None
53 * @retval None
54*/
55
56  .section .text.Reset_Handler
57  .weak Reset_Handler
58  .type Reset_Handler, %function
59Reset_Handler:
60  ldr   r0, =_estack
61  mov   sp, r0          /* set stack pointer */
62
63/* Call the clock system initialization function.*/
64  bl  SystemInit
65
66/* Copy the data segment initializers from flash to SRAM */
67  ldr r0, =_sdata
68  ldr r1, =_edata
69  ldr r2, =_sidata
70  movs r3, #0
71  b LoopCopyDataInit
72
73CopyDataInit:
74  ldr r4, [r2, r3]
75  str r4, [r0, r3]
76  adds r3, r3, #4
77
78LoopCopyDataInit:
79  adds r4, r0, r3
80  cmp r4, r1
81  bcc CopyDataInit
82
83/* Zero fill the bss segment. */
84  ldr r2, =_sbss
85  ldr r4, =_ebss
86  movs r3, #0
87  b LoopFillZerobss
88
89FillZerobss:
90  str  r3, [r2]
91  adds r2, r2, #4
92
93LoopFillZerobss:
94  cmp r2, r4
95  bcc FillZerobss
96
97/* Call static constructors */
98  bl __libc_init_array
99/* Call the application s entry point.*/
100  bl main
101
102LoopForever:
103  b LoopForever
104
105.size Reset_Handler, .-Reset_Handler
106
107/**
108 * @brief  This is the code that gets called when the processor receives an
109 *         unexpected interrupt.  This simply enters an infinite loop, preserving
110 *         the system state for examination by a debugger.
111 *
112 * @param  None
113 * @retval None
114*/
115  .section .text.Default_Handler,"ax",%progbits
116Default_Handler:
117Infinite_Loop:
118  b Infinite_Loop
119  .size Default_Handler, .-Default_Handler
120
121/******************************************************************************
122*
123* The minimal vector table for a Cortex M0.  Note that the proper constructs
124* must be placed on this to ensure that it ends up at physical address
125* 0x0000.0000.
126*
127******************************************************************************/
128  .section .isr_vector,"a",%progbits
129  .type g_pfnVectors, %object
130  .size g_pfnVectors, .-g_pfnVectors
131
132g_pfnVectors:
133  .word _estack
134  .word Reset_Handler
135  .word NMI_Handler
136  .word HardFault_Handler
137  .word 0
138  .word 0
139  .word 0
140  .word 0
141  .word 0
142  .word 0
143  .word 0
144  .word SVC_Handler
145  .word 0
146  .word 0
147  .word PendSV_Handler
148  .word SysTick_Handler
149  .word WWDG_IRQHandler                   /* Window WatchDog              */
150  .word PVD_IRQHandler                    /* PVD through EXTI Line detect */
151  .word RTC_TAMP_IRQHandler               /* RTC through the EXTI line    */
152  .word FLASH_IRQHandler                  /* FLASH                        */
153  .word RCC_IRQHandler                    /* RCC                          */
154  .word EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
155  .word EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
156  .word EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
157  .word UCPD1_2_IRQHandler                /* UCPD1, UCPD2                 */
158  .word DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
159  .word DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
160  .word DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler /* DMA1 Channel 4 to Channel 7, DMAMUX1 overrun */
161  .word ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2         */
162  .word TIM1_BRK_UP_TRG_COM_IRQHandler    /* TIM1 Break, Update, Trigger and Commutation */
163  .word TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
164  .word TIM2_IRQHandler                   /* TIM2                         */
165  .word TIM3_IRQHandler                   /* TIM3                         */
166  .word TIM6_DAC_LPTIM1_IRQHandler        /* TIM6, DAC and LPTIM1         */
167  .word TIM7_LPTIM2_IRQHandler            /* TIM7 and LPTIM2              */
168  .word TIM14_IRQHandler                  /* TIM14                        */
169  .word TIM15_IRQHandler                  /* TIM15                        */
170  .word TIM16_IRQHandler                  /* TIM16                        */
171  .word TIM17_IRQHandler                  /* TIM17                        */
172  .word I2C1_IRQHandler                   /* I2C1                         */
173  .word I2C2_IRQHandler                   /* I2C2                         */
174  .word SPI1_IRQHandler                   /* SPI1                         */
175  .word SPI2_IRQHandler                   /* SPI2                         */
176  .word USART1_IRQHandler                 /* USART1                       */
177  .word USART2_IRQHandler                 /* USART2                       */
178  .word USART3_4_LPUART1_IRQHandler       /* USART3, USART4 and LPUART1   */
179  .word CEC_IRQHandler                    /* CEC                          */
180
181/*******************************************************************************
182*
183* Provide weak aliases for each Exception handler to the Default_Handler.
184* As they are weak aliases, any function with the same name will override
185* this definition.
186*
187*******************************************************************************/
188
189  .weak      NMI_Handler
190  .thumb_set NMI_Handler,Default_Handler
191
192  .weak      HardFault_Handler
193  .thumb_set HardFault_Handler,Default_Handler
194
195  .weak      SVC_Handler
196  .thumb_set SVC_Handler,Default_Handler
197
198  .weak      PendSV_Handler
199  .thumb_set PendSV_Handler,Default_Handler
200
201  .weak      SysTick_Handler
202  .thumb_set SysTick_Handler,Default_Handler
203
204  .weak      WWDG_IRQHandler
205  .thumb_set WWDG_IRQHandler,Default_Handler
206
207  .weak      PVD_IRQHandler
208  .thumb_set PVD_IRQHandler,Default_Handler
209
210  .weak      RTC_TAMP_IRQHandler
211  .thumb_set RTC_TAMP_IRQHandler,Default_Handler
212
213  .weak      FLASH_IRQHandler
214  .thumb_set FLASH_IRQHandler,Default_Handler
215
216  .weak      RCC_IRQHandler
217  .thumb_set RCC_IRQHandler,Default_Handler
218
219  .weak      EXTI0_1_IRQHandler
220  .thumb_set EXTI0_1_IRQHandler,Default_Handler
221
222  .weak      EXTI2_3_IRQHandler
223  .thumb_set EXTI2_3_IRQHandler,Default_Handler
224
225  .weak      EXTI4_15_IRQHandler
226  .thumb_set EXTI4_15_IRQHandler,Default_Handler
227
228  .weak      UCPD1_2_IRQHandler
229  .thumb_set UCPD1_2_IRQHandler,Default_Handler
230
231  .weak      DMA1_Channel1_IRQHandler
232  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
233
234  .weak      DMA1_Channel2_3_IRQHandler
235  .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
236
237  .weak      DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
238  .thumb_set DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler,Default_Handler
239
240  .weak      ADC1_COMP_IRQHandler
241  .thumb_set ADC1_COMP_IRQHandler,Default_Handler
242
243  .weak      TIM1_BRK_UP_TRG_COM_IRQHandler
244  .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
245
246  .weak      TIM1_CC_IRQHandler
247  .thumb_set TIM1_CC_IRQHandler,Default_Handler
248
249  .weak      TIM2_IRQHandler
250  .thumb_set TIM2_IRQHandler,Default_Handler
251
252  .weak      TIM3_IRQHandler
253  .thumb_set TIM3_IRQHandler,Default_Handler
254
255  .weak      TIM6_DAC_LPTIM1_IRQHandler
256  .thumb_set TIM6_DAC_LPTIM1_IRQHandler,Default_Handler
257
258  .weak      TIM7_LPTIM2_IRQHandler
259  .thumb_set TIM7_LPTIM2_IRQHandler,Default_Handler
260
261  .weak      TIM14_IRQHandler
262  .thumb_set TIM14_IRQHandler,Default_Handler
263
264  .weak      TIM15_IRQHandler
265  .thumb_set TIM15_IRQHandler,Default_Handler
266
267  .weak      TIM16_IRQHandler
268  .thumb_set TIM16_IRQHandler,Default_Handler
269
270  .weak      TIM17_IRQHandler
271  .thumb_set TIM17_IRQHandler,Default_Handler
272
273  .weak      I2C1_IRQHandler
274  .thumb_set I2C1_IRQHandler,Default_Handler
275
276  .weak      I2C2_IRQHandler
277  .thumb_set I2C2_IRQHandler,Default_Handler
278
279  .weak      SPI1_IRQHandler
280  .thumb_set SPI1_IRQHandler,Default_Handler
281
282  .weak      SPI2_IRQHandler
283  .thumb_set SPI2_IRQHandler,Default_Handler
284
285  .weak      USART1_IRQHandler
286  .thumb_set USART1_IRQHandler,Default_Handler
287
288  .weak      USART2_IRQHandler
289  .thumb_set USART2_IRQHandler,Default_Handler
290
291  .weak      USART3_4_LPUART1_IRQHandler
292  .thumb_set USART3_4_LPUART1_IRQHandler,Default_Handler
293
294  .weak      CEC_IRQHandler
295  .thumb_set CEC_IRQHandler,Default_Handler
296
297/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
298
Note: See TracBrowser for help on using the repository browser.