source: ctrl/firmware/Main

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @101   14 months Zed
(edit) @100   14 months Zed
(edit) @99   14 months Zed
(edit) @98   14 months Zed Charging PWM on TIM1 was implemented.
(edit) @97   14 months Zed DAC works.
(edit) @96   14 months Zed ADC3 with DMA was implemented. DTS was activated.
(edit) @95   14 months Zed Fixing project.
(edit) @94   14 months Zed Fixing project.
(edit) @93   14 months Zed Fixing project.
(edit) @92   14 months Zed Fixing project before changing MPU settings in CubeMX.
(edit) @91   14 months Zed ADC module was activated.
(edit) @90   14 months Zed Communication with M24256E EEPROM works.
(edit) @89   14 months Zed Added basic I2C EEPROM support.
(edit) @88   14 months Zed BME280 data transfer works ok. Device returns its ID 0x60.
(edit) @87   14 months Zed RTC is working.
(edit) @86   14 months Zed
(edit) @85   15 months Zed Fixing project before adding 1Wire port in CubeMX.
(edit) @84   15 months Zed Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
(edit) @83   15 months Zed Modbus Master and Slave Hardware were tested.
(edit) @82   15 months Zed DMA transfer to µSD-card was implemented.
(edit) @81   15 months Zed Modbus Master and Slave interfaces were added.
(edit) @80   15 months Zed Added main SYS_DATA structure.
(edit) @79   15 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   15 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   15 months Zed LwIP was removed from the project.
(edit) @76   15 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   15 months Zed FatFs is working, but without DMA.
(edit) @74   15 months Zed FatFs with DMA were implemented.
(edit) @73   15 months Zed FreeRTOS can be compiled without errors.
(edit) @72   15 months Zed FreeRTOS was added to the project.
(edit) @71   15 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   15 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   15 months Zed NetX can be compiled and initialized.
(edit) @68   15 months Zed Fixing project before Ethernet implementation.
(edit) @67   15 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   15 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   15 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   15 months Zed USART3 TX DMA is working.
(edit) @63   15 months Zed Fixing project.
(edit) @62   15 months Zed GSM STATUS pin is working.
(edit) @61   15 months Zed GSM thread was added.
(edit) @60   15 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   16 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   16 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   17 months Zed FileX is working.
(edit) @56   17 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   17 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   17 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   17 months Zed
(edit) @52   17 months Zed
(edit) @51   17 months Zed SDMMC low level driver was added.
(edit) @50   17 months Zed LED control description were added.
(edit) @48   17 months Zed Backlight was turned on for Display.
(edit) @47   17 months Zed
(edit) @46   17 months Zed
(edit) @45   17 months Zed Added SPI module for Display.
(edit) @44   17 months Zed
(edit) @43   17 months Zed
(edit) @42   17 months Zed
(edit) @41   17 months Zed
(edit) @40   17 months Zed
(edit) @39   17 months Zed RTC module was activated.
(edit) @38   17 months Zed Instruction and Data caches were activated.
(edit) @37   17 months Zed
(edit) @36   17 months Zed
(edit) @35   17 months Zed
(edit) @34   17 months Zed
(edit) @33   17 months Zed
(edit) @32   17 months Zed
(edit) @31   17 months Zed
(edit) @30   17 months Zed
(edit) @29   17 months Zed
(edit) @28   17 months Zed
(edit) @27   17 months Zed
(edit) @26   17 months Zed
(edit) @25   17 months Zed
(edit) @24   17 months Zed
(edit) @23   17 months Zed
(edit) @22   17 months Zed
(edit) @21   17 months Zed
(edit) @20   17 months Zed
(edit) @19   17 months Zed
(edit) @18   17 months Zed
(edit) @17   17 months Zed
(edit) @16   17 months Zed
(edit) @15   17 months Zed
(edit) @14   17 months Zed
(edit) @13   17 months Zed Forgot to add to the project these files.
(edit) @12   17 months Zed Added more files to the project.
(edit) @11   17 months Zed
(edit) @10   17 months Zed Added SEGGER project files.
(edit) @9   17 months Zed
(edit) @8   17 months Zed Rearranged several folders.
(add) @7   17 months f.jahn
Note: See TracRevisionLog for help on using the revision log.