|
|
|
@89
|
10 months |
Zed |
Added basic I2C EEPROM support.
|
|
|
|
@88
|
10 months |
Zed |
BME280 data transfer works ok. Device returns its ID 0x60.
|
|
|
|
@87
|
10 months |
Zed |
RTC is working.
|
|
|
|
@86
|
10 months |
Zed |
|
|
|
|
@85
|
10 months |
Zed |
Fixing project before adding 1Wire port in CubeMX.
|
|
|
|
@84
|
10 months |
Zed |
Added TIM6 in CubeMX to generate 1µs delays for 1-Wire Protocol.
|
|
|
|
@83
|
10 months |
Zed |
Modbus Master and Slave Hardware were tested.
|
|
|
|
@82
|
10 months |
Zed |
DMA transfer to µSD-card was implemented.
|
|
|
|
@80
|
10 months |
Zed |
Added main SYS_DATA structure.
|
|
|
|
@78
|
10 months |
Zed |
Fixing project to enable DMA for SPI2.
|
|
|
|
@77
|
10 months |
Zed |
LwIP was removed from the project.
|
|
|
|
@76
|
10 months |
Zed |
Fixing project before changing NSS control for SPI2 in CubeMX.
|
|
|
|
@75
|
10 months |
Zed |
FatFs is working, but without DMA.
|
|
|
|
@74
|
10 months |
Zed |
FatFs with DMA were implemented.
|
|
|
|
@73
|
10 months |
Zed |
FreeRTOS can be compiled without errors.
|
|
|
|
@72
|
10 months |
Zed |
FreeRTOS was added to the project.
|
|
|
|
@71
|
10 months |
Zed |
Fixing project before adding support for FreeRTOS.
|
|
|
|
@69
|
10 months |
Zed |
NetX can be compiled and initialized.
|
|
|
|
@68
|
10 months |
Zed |
Fixing project before Ethernet implementation.
|
|
|
|
@67
|
10 months |
Zed |
FAN TACHO RPM was moved changed to use interrupt.
|
|
|
|
@66
|
10 months |
Zed |
FAN PWM control and TACHO signal measuring are working.
|
|
|
|
@65
|
10 months |
Zed |
GSM, USB, BLE and GPS are working.
|
|
|
|
@64
|
11 months |
Zed |
USART3 TX DMA is working.
|
|
|
|
@63
|
11 months |
Zed |
Fixing project.
|
|
|
|
@62
|
11 months |
Zed |
GSM STATUS pin is working.
|
|
|
|
@61
|
11 months |
Zed |
GSM thread was added.
|
|
|
|
@60
|
11 months |
Zed |
SD card init function was changed not to stop if SD-card not present.
|
|
|
|
@59
|
11 months |
Zed |
HAL library was updated.
SD DETECT pin is working.
|
|
|
|
@58
|
12 months |
Zed |
POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
|
|
|
|
@57
|
12 months |
Zed |
FileX is working.
|
|
|
|
@56
|
12 months |
Zed |
Tick rate was changed to 1000 in CubeMX.
|
|
|
|
@55
|
12 months |
Zed |
Can be compiled without errors. Fixing before changing tick rate to …
|
|
|
|
@54
|
12 months |
Zed |
SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
|
|
|
|
@51
|
12 months |
Zed |
SDMMC low level driver was added.
|
|
|
|
@50
|
12 months |
Zed |
LED control description were added.
|
|
|
|
@48
|
12 months |
Zed |
Backlight was turned on for Display.
|
|
|
|
@47
|
12 months |
Zed |
|
|
|
|
@45
|
12 months |
Zed |
Added SPI module for Display.
|
|
|
|
@44
|
12 months |
Zed |
|
|
|
|
@39
|
12 months |
Zed |
RTC module was activated.
|
|
|
|
@38
|
12 months |
Zed |
Instruction and Data caches were activated.
|
|
|
|
@15
|
12 months |
Zed |
|
|
|
|
@12
|
12 months |
Zed |
Added more files to the project.
|
