source:

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @81   16 months Zed Modbus Master and Slave interfaces were added.
(edit) @80   16 months Zed Added main SYS_DATA structure.
(edit) @79   16 months Zed DHCP client can get IP-address from fritz!box
(edit) @78   16 months Zed Fixing project to enable DMA for SPI2.
(edit) @77   16 months Zed LwIP was removed from the project.
(edit) @76   16 months Zed Fixing project before changing NSS control for SPI2 in CubeMX.
(edit) @75   16 months Zed FatFs is working, but without DMA.
(edit) @74   16 months Zed FatFs with DMA were implemented.
(edit) @73   16 months Zed FreeRTOS can be compiled without errors.
(edit) @72   16 months Zed FreeRTOS was added to the project.
(edit) @71   16 months Zed Fixing project before adding support for FreeRTOS.
(edit) @70   16 months Zed AZRTOS and NetX were removed from the project.
(edit) @69   17 months Zed NetX can be compiled and initialized.
(edit) @68   17 months Zed Fixing project before Ethernet implementation.
(edit) @67   17 months Zed FAN TACHO RPM was moved changed to use interrupt.
(edit) @66   17 months Zed FAN PWM control and TACHO signal measuring are working.
(edit) @65   17 months Zed GSM, USB, BLE and GPS are working.
(edit) @64   17 months Zed USART3 TX DMA is working.
(edit) @63   17 months Zed Fixing project.
(edit) @62   17 months Zed GSM STATUS pin is working.
(edit) @61   17 months Zed GSM thread was added.
(edit) @60   17 months Zed SD card init function was changed not to stop if SD-card not present.
(edit) @59   17 months Zed HAL library was updated. SD DETECT pin is working.
(edit) @58   18 months Zed POWER_ENABLE lines for 4V, 5V, 10V and 15V were tested.
(edit) @57   18 months Zed FileX is working.
(edit) @56   18 months Zed Tick rate was changed to 1000 in CubeMX.
(edit) @55   18 months Zed Can be compiled without errors. Fixing before changing tick rate to …
(edit) @54   18 months Zed SDMMC(DMA) and Azure_RTOS(with FileX) are activated.
(edit) @53   18 months Zed
(edit) @52   18 months Zed
(edit) @51   18 months Zed SDMMC low level driver was added.
(edit) @50   18 months Zed LED control description were added.
(edit) @49   18 months f.jahn
(edit) @48   18 months Zed Backlight was turned on for Display.
(edit) @47   18 months Zed
(edit) @46   18 months Zed
(edit) @45   18 months Zed Added SPI module for Display.
(edit) @44   18 months Zed
(edit) @43   18 months Zed
(edit) @42   18 months Zed
(edit) @41   18 months Zed
(edit) @40   18 months Zed
(edit) @39   18 months Zed RTC module was activated.
(edit) @38   18 months Zed Instruction and Data caches were activated.
(edit) @37   18 months Zed
(edit) @36   18 months Zed
(edit) @35   18 months Zed
(edit) @34   18 months Zed
(edit) @33   18 months Zed
(edit) @32   18 months Zed
(edit) @31   18 months Zed
(edit) @30   18 months Zed
(edit) @29   18 months Zed
(edit) @28   18 months Zed
(edit) @27   18 months Zed
(edit) @26   18 months Zed
(edit) @25   18 months Zed
(edit) @24   18 months Zed
(edit) @23   18 months Zed
(edit) @22   18 months Zed
(edit) @21   18 months Zed
(edit) @20   18 months Zed
(edit) @19   18 months Zed
(edit) @18   18 months Zed
(edit) @17   18 months Zed
(edit) @16   18 months Zed
(edit) @15   18 months Zed
(edit) @14   18 months Zed
(edit) @13   18 months Zed Forgot to add to the project these files.
(edit) @12   18 months Zed Added more files to the project.
(edit) @11   19 months Zed
(edit) @10   19 months Zed Added SEGGER project files.
(edit) @9   19 months Zed
(edit) @8   19 months Zed Rearranged several folders.
(edit) @7   19 months f.jahn
(edit) @6   19 months f.jahn
(edit) @5   19 months f.jahn
(edit) @4   21 months f.jahn
(edit) @3   21 months f.jahn
(edit) @2   22 months f.jahn
(add) @1   22 months f.jahn
Note: See TracRevisionLog for help on using the revision log.