| 1 | LTspice 24.0.9 for Windows |
|---|
| 2 | Circuit: * D:\projekte\ecs_greencontroller\branches\gc75_40_V2\simulation\buck4_output_lisn.asc |
|---|
| 3 | Start Time: Mon Apr 29 22:24:09 2024 |
|---|
| 4 | solver = Alternate |
|---|
| 5 | Maximum thread count: 24 |
|---|
| 6 | tnom = 27 |
|---|
| 7 | temp = 27 |
|---|
| 8 | method = modified trap |
|---|
| 9 | trtol = 1 |
|---|
| 10 | c5: Increased Cpar to 1e-11 |
|---|
| 11 | c6: Increased Cpar to 1e-11 |
|---|
| 12 | c27: Increased Cpar to 2.2e-11 |
|---|
| 13 | c28: Increased Cpar to 3.3e-10 |
|---|
| 14 | c42: Increased Cpar to 4.7e-11 |
|---|
| 15 | c43: Increased Cpar to 4.7e-11 |
|---|
| 16 | c44: Increased Cpar to 3.3e-10 |
|---|
| 17 | c4: Increased Cpar to 2.2e-11 |
|---|
| 18 | c8: Increased Cpar to 2.2e-11 |
|---|
| 19 | c9: Increased Cpar to 2.2e-11 |
|---|
| 20 | c10: Increased Cpar to 2.2e-11 |
|---|
| 21 | c11: Increased Cpar to 2.2e-11 |
|---|
| 22 | c12: Increased Cpar to 2.2e-11 |
|---|
| 23 | c13: Increased Cpar to 2.2e-11 |
|---|
| 24 | c14: Increased Cpar to 2.2e-11 |
|---|
| 25 | c15: Increased Cpar to 2.2e-11 |
|---|
| 26 | c16: Increased Cpar to 2.2e-11 |
|---|
| 27 | c17: Increased Cpar to 2.2e-11 |
|---|
| 28 | c18: Increased Cpar to 2.2e-11 |
|---|
| 29 | c19: Increased Cpar to 2.2e-11 |
|---|
| 30 | c1: Increased Cpar to 2.2e-11 |
|---|
| 31 | c20: Increased Cpar to 2.2e-11 |
|---|
| 32 | c21: Increased Cpar to 3.3e-10 |
|---|
| 33 | c26: Increased Cpar to 3.3e-10 |
|---|
| 34 | c41: Increased Cpar to 3.3e-10 |
|---|
| 35 | |
|---|
| 36 | WARNING: Less than two connections to node vcc. This node is used by r2. |
|---|
| 37 | Early termination of direct N-R iteration. |
|---|
| 38 | Direct Newton iteration failed to find .op point. (Use ".option noopiter" to skip.) |
|---|
| 39 | Starting Gmin stepping |
|---|
| 40 | Gmin = 10 |
|---|
| 41 | Gmin = 1.07374 |
|---|
| 42 | vernier = 0.5 |
|---|
| 43 | vernier = 0.25 |
|---|
| 44 | vernier = 0.125 |
|---|
| 45 | vernier = 0.0625 |
|---|
| 46 | vernier = 0.03125 |
|---|
| 47 | vernier = 0.015625 |
|---|
| 48 | vernier = 0.0078125 |
|---|
| 49 | vernier = 0.00390625 |
|---|
| 50 | Gmin = 0.858993 |
|---|
| 51 | vernier = 0.00195312 |
|---|
| 52 | vernier = 0.000976562 |
|---|
| 53 | vernier = 0.000488281 |
|---|
| 54 | Gmin = 0 |
|---|
| 55 | Gmin stepping succeeded in finding the operating point. |
|---|
| 56 | |
|---|
| 57 | Ignoring empty pin current: Ix(u1:12) |
|---|
| 58 | Ignoring empty pin current: Ix(u1:12) |
|---|
| 59 | Total elapsed time: 582.961 seconds. |
|---|
| 60 | |
|---|
