LTspice 24.0.9 for Windows
Circuit: * D:\projekte\ecs_greencontroller\branches\gc75_40_V2\simulation\buck4_output_lisn.asc
Start Time: Mon Apr 29 22:24:09 2024
solver = Alternate
Maximum thread count: 24
tnom = 27
temp = 27
method = modified trap
trtol = 1
c5: Increased Cpar to 1e-11
c6: Increased Cpar to 1e-11
c27: Increased Cpar to 2.2e-11
c28: Increased Cpar to 3.3e-10
c42: Increased Cpar to 4.7e-11
c43: Increased Cpar to 4.7e-11
c44: Increased Cpar to 3.3e-10
c4: Increased Cpar to 2.2e-11
c8: Increased Cpar to 2.2e-11
c9: Increased Cpar to 2.2e-11
c10: Increased Cpar to 2.2e-11
c11: Increased Cpar to 2.2e-11
c12: Increased Cpar to 2.2e-11
c13: Increased Cpar to 2.2e-11
c14: Increased Cpar to 2.2e-11
c15: Increased Cpar to 2.2e-11
c16: Increased Cpar to 2.2e-11
c17: Increased Cpar to 2.2e-11
c18: Increased Cpar to 2.2e-11
c19: Increased Cpar to 2.2e-11
c1: Increased Cpar to 2.2e-11
c20: Increased Cpar to 2.2e-11
c21: Increased Cpar to 3.3e-10
c26: Increased Cpar to 3.3e-10
c41: Increased Cpar to 3.3e-10

WARNING: Less than two connections to node vcc.  This node is used by r2.
Early termination of direct N-R iteration.
Direct Newton iteration failed to find .op point.  (Use ".option noopiter" to skip.)
Starting Gmin stepping
Gmin = 10
Gmin = 1.07374
vernier = 0.5
vernier = 0.25
vernier = 0.125
vernier = 0.0625
vernier = 0.03125
vernier = 0.015625
vernier = 0.0078125
vernier = 0.00390625
Gmin = 0.858993
vernier = 0.00195312
vernier = 0.000976562
vernier = 0.000488281
Gmin = 0
Gmin stepping succeeded in finding the operating point.

Ignoring empty pin current: Ix(u1:12)
Ignoring empty pin current: Ix(u1:12)
Total elapsed time: 582.961 seconds.