Index: trunk/firmware/App/CubeMX/Appli/Core/Src/gpio.c
===================================================================
--- trunk/firmware/App/CubeMX/Appli/Core/Src/gpio.c	(revision 36)
+++ trunk/firmware/App/CubeMX/Appli/Core/Src/gpio.c	(revision 39)
@@ -45,5 +45,4 @@
   /* GPIO Ports Clock Enable */
   __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
   __HAL_RCC_GPIOE_CLK_ENABLE();
   __HAL_RCC_GPIOQ_CLK_ENABLE();
Index: trunk/firmware/App/CubeMX/Appli/Core/Src/main.c
===================================================================
--- trunk/firmware/App/CubeMX/Appli/Core/Src/main.c	(revision 36)
+++ trunk/firmware/App/CubeMX/Appli/Core/Src/main.c	(revision 39)
@@ -163,4 +163,6 @@
   RIMC_master.SecPriv = RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV;
   HAL_RIF_RIMC_ConfigMasterAttributes(RIF_MASTER_INDEX_SDMMC2, &RIMC_master);
+
+  /*RISUP configuration*/
   HAL_RIF_RISC_SetSlaveSecureAttributes(RIF_RISC_PERIPH_INDEX_SDMMC2 , RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV);
 
Index: trunk/firmware/App/CubeMX/Appli/Core/Src/sdmmc.c
===================================================================
--- trunk/firmware/App/CubeMX/Appli/Core/Src/sdmmc.c	(revision 36)
+++ trunk/firmware/App/CubeMX/Appli/Core/Src/sdmmc.c	(revision 39)
@@ -42,5 +42,5 @@
   hsd2.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING;
   hsd2.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE;
-  hsd2.Init.BusWide = SDMMC_BUS_WIDE_1B;
+  hsd2.Init.BusWide = SDMMC_BUS_WIDE_4B;
   hsd2.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
   hsd2.Init.ClockDiv = 2;
@@ -79,5 +79,4 @@
 
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    __HAL_RCC_GPIOD_CLK_ENABLE();
     __HAL_RCC_GPIOE_CLK_ENABLE();
     /**SDMMC2 GPIO Configuration
@@ -85,25 +84,19 @@
     PC5     ------> SDMMC2_D1
     PC0     ------> SDMMC2_D2
-    PD2     ------> SDMMC2_CK
+    PC2     ------> SDMMC2_CK
     PE4     ------> SDMMC2_D3
     PC3     ------> SDMMC2_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
+    GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_0|GPIO_PIN_2
+                          |GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF11_SDMMC2;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-    /*GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Pin = GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF11_SDMMC2;
-    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);*/
-
-    GPIO_InitStruct.Pin = GPIO_PIN_4;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF11_SDMMC2;
@@ -134,11 +127,10 @@
     PC5     ------> SDMMC2_D1
     PC0     ------> SDMMC2_D2
-    PD2     ------> SDMMC2_CK
+    PC2     ------> SDMMC2_CK
     PE4     ------> SDMMC2_D3
     PC3     ------> SDMMC2_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_0|GPIO_PIN_3);
-
-    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_0|GPIO_PIN_2
+                          |GPIO_PIN_3);
 
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4);