Index: Versteifungen/LiMax160-l.brd
===================================================================
--- Versteifungen/LiMax160-l.brd	(revision 12)
+++ 	(revision )
@@ -1,295 +1,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="9.6.2">
-<drawing>
-<settings>
-<setting alwaysvectorfont="yes"/>
-<setting verticaltext="up"/>
-</settings>
-<grid distance="0.5" unitdist="mm" unit="mm" style="lines" multiple="5" display="yes" altdistance="5" altunitdist="mil" altunit="mil"/>
-<layers>
-<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
-<layer number="2" name="Route2" color="16" fill="1" visible="no" active="no"/>
-<layer number="3" name="Route3" color="17" fill="1" visible="no" active="no"/>
-<layer number="4" name="Route4" color="18" fill="1" visible="no" active="no"/>
-<layer number="5" name="Route5" color="19" fill="1" visible="no" active="no"/>
-<layer number="6" name="Route6" color="25" fill="1" visible="no" active="no"/>
-<layer number="7" name="Route7" color="26" fill="1" visible="no" active="no"/>
-<layer number="8" name="Route8" color="27" fill="1" visible="no" active="no"/>
-<layer number="9" name="Route9" color="28" fill="1" visible="no" active="no"/>
-<layer number="10" name="Route10" color="29" fill="1" visible="no" active="no"/>
-<layer number="11" name="Route11" color="30" fill="1" visible="no" active="no"/>
-<layer number="12" name="Route12" color="20" fill="1" visible="no" active="no"/>
-<layer number="13" name="Route13" color="21" fill="1" visible="no" active="no"/>
-<layer number="14" name="Route14" color="22" fill="1" visible="no" active="no"/>
-<layer number="15" name="Route15" color="23" fill="1" visible="no" active="no"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
-<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
-<layer number="20" name="Dimension" color="24" fill="1" visible="yes" active="yes"/>
-<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
-<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
-<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
-<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
-<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
-<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
-<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
-<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
-<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
-<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
-<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
-<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
-<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
-<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
-<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
-<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
-<layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
-<layer number="47" name="Measures" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
-</layers>
-<board>
-<plain>
-<wire x1="0" y1="0" x2="206" y2="0" width="0.1524" layer="20"/>
-<wire x1="206" y1="0" x2="206" y2="35" width="0.1524" layer="20"/>
-<wire x1="206" y1="35" x2="0" y2="35" width="0.1524" layer="20"/>
-<wire x1="0" y1="35" x2="0" y2="0" width="0.1524" layer="20"/>
-<hole x="21" y="17.5" drill="6.1"/>
-<hole x="185" y="17.5" drill="6.1"/>
-<dimension x1="21" y1="17.5" x2="185" y2="17.5" x3="103" y3="-12.5" textsize="1.778" layer="47" dtype="vertical"/>
-<dimension x1="21" y1="17.5" x2="0" y2="17.5" x3="10.5" y3="-12.5" textsize="1.778" layer="47"/>
-<dimension x1="185" y1="17.5" x2="206" y2="17.5" x3="195.5" y3="-12.5" textsize="1.778" layer="47"/>
-<dimension x1="185" y1="17.5" x2="185" y2="35" x3="217.5" y3="26.25" textsize="1.778" layer="47"/>
-<dimension x1="185" y1="17.5" x2="185" y2="0" x3="217.5" y3="8.75" textsize="1.778" layer="47"/>
-<hole x="5.5" y="17.5" drill="6.1"/>
-<hole x="200.5" y="17.5" drill="6.1"/>
-<dimension x1="200.5" y1="17.5" x2="185" y2="17.5" x3="192.75" y3="40" textsize="1.778" layer="47"/>
-<text x="45" y="17.5" size="2.54" layer="21" font="vector" ratio="15">Bitte diese Terminalversteifung während der Montage/Demontage 
-der Hochstromkabel verschraubt lassen. Danach kann diese 
-Terminalversteifung entfernt werden.</text>
-</plain>
-<libraries>
-</libraries>
-<attributes>
-</attributes>
-<variantdefs>
-</variantdefs>
-<classes>
-<class number="0" name="default" width="0" drill="0">
-</class>
-</classes>
-<designrules name="default">
-<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
-&lt;p&gt;
-Die Standard-Design-Rules sind so gewählt, dass sie für 
-die meisten Anwendungen passen. Sollte ihre Platine 
-besondere Anforderungen haben, treffen Sie die erforderlichen
-Einstellungen hier und speichern die Design Rules unter 
-einem neuen Namen ab.</description>
-<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
-&lt;p&gt;
-The default Design Rules have been set to cover
-a wide range of applications. Your particular design
-may have different requirements, so please make the
-necessary adjustments and save your customized
-design rules under a new name.</description>
-<param name="layerSetup" value="(1*16)"/>
-<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
-<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
-<param name="mdWireWire" value="6mil"/>
-<param name="mdWirePad" value="6mil"/>
-<param name="mdWireVia" value="6mil"/>
-<param name="mdPadPad" value="6mil"/>
-<param name="mdPadVia" value="6mil"/>
-<param name="mdViaVia" value="6mil"/>
-<param name="mdSmdPad" value="6mil"/>
-<param name="mdSmdVia" value="6mil"/>
-<param name="mdSmdSmd" value="6mil"/>
-<param name="mdViaViaSameLayer" value="6mil"/>
-<param name="mnLayersViaInSmd" value="2"/>
-<param name="mdCopperDimension" value="40mil"/>
-<param name="mdDrill" value="6mil"/>
-<param name="mdSmdStop" value="0mil"/>
-<param name="msWidth" value="6mil"/>
-<param name="msDrill" value="0.35mm"/>
-<param name="msMicroVia" value="9.99mm"/>
-<param name="msBlindViaRatio" value="0.5"/>
-<param name="rvPadTop" value="0.25"/>
-<param name="rvPadInner" value="0.25"/>
-<param name="rvPadBottom" value="0.25"/>
-<param name="rvViaOuter" value="0.25"/>
-<param name="rvViaInner" value="0.25"/>
-<param name="rvMicroViaOuter" value="0.25"/>
-<param name="rvMicroViaInner" value="0.25"/>
-<param name="rlMinPadTop" value="10mil"/>
-<param name="rlMaxPadTop" value="20mil"/>
-<param name="rlMinPadInner" value="10mil"/>
-<param name="rlMaxPadInner" value="20mil"/>
-<param name="rlMinPadBottom" value="10mil"/>
-<param name="rlMaxPadBottom" value="20mil"/>
-<param name="rlMinViaOuter" value="8mil"/>
-<param name="rlMaxViaOuter" value="20mil"/>
-<param name="rlMinViaInner" value="8mil"/>
-<param name="rlMaxViaInner" value="20mil"/>
-<param name="rlMinMicroViaOuter" value="4mil"/>
-<param name="rlMaxMicroViaOuter" value="20mil"/>
-<param name="rlMinMicroViaInner" value="4mil"/>
-<param name="rlMaxMicroViaInner" value="20mil"/>
-<param name="psTop" value="-1"/>
-<param name="psBottom" value="-1"/>
-<param name="psFirst" value="-1"/>
-<param name="psElongationLong" value="100"/>
-<param name="psElongationOffset" value="100"/>
-<param name="mvStopFrame" value="1"/>
-<param name="mvCreamFrame" value="0"/>
-<param name="mlMinStopFrame" value="4mil"/>
-<param name="mlMaxStopFrame" value="4mil"/>
-<param name="mlMinCreamFrame" value="0mil"/>
-<param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0mil"/>
-<param name="srRoundness" value="0"/>
-<param name="srMinRoundness" value="0mil"/>
-<param name="srMaxRoundness" value="0mil"/>
-<param name="slThermalIsolate" value="10mil"/>
-<param name="slThermalsForVias" value="0"/>
-<param name="dpMaxLengthDifference" value="10mm"/>
-<param name="dpGapFactor" value="2.5"/>
-<param name="checkAngle" value="0"/>
-<param name="checkFont" value="1"/>
-<param name="checkRestrict" value="1"/>
-<param name="checkStop" value="0"/>
-<param name="checkValues" value="0"/>
-<param name="checkNames" value="1"/>
-<param name="checkWireStubs" value="1"/>
-<param name="checkPolygonWidth" value="0"/>
-<param name="useDiameter" value="13"/>
-<param name="maxErrors" value="50"/>
-</designrules>
-<autorouter>
-<pass name="Default">
-<param name="RoutingGrid" value="50mil"/>
-<param name="AutoGrid" value="1"/>
-<param name="Efforts" value="0"/>
-<param name="TopRouterVariant" value="1"/>
-<param name="tpViaShape" value="round"/>
-<param name="PrefDir.1" value="a"/>
-<param name="PrefDir.2" value="0"/>
-<param name="PrefDir.3" value="0"/>
-<param name="PrefDir.4" value="0"/>
-<param name="PrefDir.5" value="0"/>
-<param name="PrefDir.6" value="0"/>
-<param name="PrefDir.7" value="0"/>
-<param name="PrefDir.8" value="0"/>
-<param name="PrefDir.9" value="0"/>
-<param name="PrefDir.10" value="0"/>
-<param name="PrefDir.11" value="0"/>
-<param name="PrefDir.12" value="0"/>
-<param name="PrefDir.13" value="0"/>
-<param name="PrefDir.14" value="0"/>
-<param name="PrefDir.15" value="0"/>
-<param name="PrefDir.16" value="a"/>
-<param name="cfVia" value="8"/>
-<param name="cfNonPref" value="5"/>
-<param name="cfChangeDir" value="2"/>
-<param name="cfOrthStep" value="2"/>
-<param name="cfDiagStep" value="3"/>
-<param name="cfExtdStep" value="0"/>
-<param name="cfBonusStep" value="1"/>
-<param name="cfMalusStep" value="1"/>
-<param name="cfPadImpact" value="4"/>
-<param name="cfSmdImpact" value="4"/>
-<param name="cfBusImpact" value="0"/>
-<param name="cfHugging" value="3"/>
-<param name="cfAvoid" value="4"/>
-<param name="cfPolygon" value="10"/>
-<param name="cfBase.1" value="0"/>
-<param name="cfBase.2" value="1"/>
-<param name="cfBase.3" value="1"/>
-<param name="cfBase.4" value="1"/>
-<param name="cfBase.5" value="1"/>
-<param name="cfBase.6" value="1"/>
-<param name="cfBase.7" value="1"/>
-<param name="cfBase.8" value="1"/>
-<param name="cfBase.9" value="1"/>
-<param name="cfBase.10" value="1"/>
-<param name="cfBase.11" value="1"/>
-<param name="cfBase.12" value="1"/>
-<param name="cfBase.13" value="1"/>
-<param name="cfBase.14" value="1"/>
-<param name="cfBase.15" value="1"/>
-<param name="cfBase.16" value="0"/>
-<param name="mnVias" value="20"/>
-<param name="mnSegments" value="9999"/>
-<param name="mnExtdSteps" value="9999"/>
-<param name="mnRipupLevel" value="10"/>
-<param name="mnRipupSteps" value="100"/>
-<param name="mnRipupTotal" value="100"/>
-</pass>
-<pass name="Follow-me" refer="Default" active="yes">
-</pass>
-<pass name="Busses" refer="Default" active="yes">
-<param name="cfNonPref" value="4"/>
-<param name="cfBusImpact" value="4"/>
-<param name="cfHugging" value="0"/>
-<param name="mnVias" value="0"/>
-</pass>
-<pass name="Route" refer="Default" active="yes">
-</pass>
-<pass name="Optimize1" refer="Default" active="yes">
-<param name="cfVia" value="99"/>
-<param name="cfExtdStep" value="10"/>
-<param name="cfHugging" value="1"/>
-<param name="mnExtdSteps" value="1"/>
-<param name="mnRipupLevel" value="0"/>
-</pass>
-<pass name="Optimize2" refer="Optimize1" active="yes">
-<param name="cfNonPref" value="0"/>
-<param name="cfChangeDir" value="6"/>
-<param name="cfExtdStep" value="0"/>
-<param name="cfBonusStep" value="2"/>
-<param name="cfMalusStep" value="2"/>
-<param name="cfPadImpact" value="2"/>
-<param name="cfSmdImpact" value="2"/>
-<param name="cfHugging" value="0"/>
-</pass>
-<pass name="Optimize3" refer="Optimize2" active="yes">
-<param name="cfChangeDir" value="8"/>
-<param name="cfPadImpact" value="0"/>
-<param name="cfSmdImpact" value="0"/>
-</pass>
-<pass name="Optimize4" refer="Optimize3" active="yes">
-<param name="cfChangeDir" value="25"/>
-</pass>
-</autorouter>
-<elements>
-</elements>
-<signals>
-</signals>
-<mfgpreviewcolors>
-<mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>
-<mfgpreviewcolor name="silkscreencolor" color="0xFFFEFEFE"/>
-<mfgpreviewcolor name="backgroundcolor" color="0xFF282828"/>
-<mfgpreviewcolor name="coppercolor" color="0xFFFFBF00"/>
-<mfgpreviewcolor name="substratecolor" color="0xFF786E46"/>
-</mfgpreviewcolors>
-</board>
-</drawing>
-<compatibility>
-<note version="6.3" minversion="6.2.2" severity="warning">
-Since Version 6.2.2 text objects can contain more than one line,
-which will not be processed correctly with this version.
-</note>
-</compatibility>
-</eagle>
Index: Versteifungen/LiMax160_LiMax304.brd
===================================================================
--- Versteifungen/LiMax160_LiMax304.brd	(revision 12)
+++ 	(revision )
@@ -1,294 +1,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="9.6.2">
-<drawing>
-<settings>
-<setting alwaysvectorfont="yes"/>
-<setting verticaltext="up"/>
-</settings>
-<grid distance="0.5" unitdist="mm" unit="mm" style="lines" multiple="5" display="yes" altdistance="5" altunitdist="mil" altunit="mil"/>
-<layers>
-<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
-<layer number="2" name="Route2" color="16" fill="1" visible="no" active="no"/>
-<layer number="3" name="Route3" color="17" fill="1" visible="no" active="no"/>
-<layer number="4" name="Route4" color="18" fill="1" visible="no" active="no"/>
-<layer number="5" name="Route5" color="19" fill="1" visible="no" active="no"/>
-<layer number="6" name="Route6" color="25" fill="1" visible="no" active="no"/>
-<layer number="7" name="Route7" color="26" fill="1" visible="no" active="no"/>
-<layer number="8" name="Route8" color="27" fill="1" visible="no" active="no"/>
-<layer number="9" name="Route9" color="28" fill="1" visible="no" active="no"/>
-<layer number="10" name="Route10" color="29" fill="1" visible="no" active="no"/>
-<layer number="11" name="Route11" color="30" fill="1" visible="no" active="no"/>
-<layer number="12" name="Route12" color="20" fill="1" visible="no" active="no"/>
-<layer number="13" name="Route13" color="21" fill="1" visible="no" active="no"/>
-<layer number="14" name="Route14" color="22" fill="1" visible="no" active="no"/>
-<layer number="15" name="Route15" color="23" fill="1" visible="no" active="no"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
-<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
-<layer number="20" name="Dimension" color="24" fill="1" visible="yes" active="yes"/>
-<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
-<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
-<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
-<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
-<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
-<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
-<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
-<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
-<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
-<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
-<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
-<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
-<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
-<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
-<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
-<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
-<layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
-<layer number="47" name="Measures" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
-</layers>
-<board>
-<plain>
-<wire x1="0" y1="0" x2="134" y2="0" width="0.1524" layer="20"/>
-<wire x1="134" y1="0" x2="134" y2="35" width="0.1524" layer="20"/>
-<wire x1="134" y1="35" x2="0" y2="35" width="0.1524" layer="20"/>
-<wire x1="0" y1="35" x2="0" y2="0" width="0.1524" layer="20"/>
-<hole x="21" y="17.5" drill="6.1"/>
-<hole x="113" y="17.5" drill="6.1"/>
-<dimension x1="21" y1="17.5" x2="0" y2="17.5" x3="10.5" y3="-12.5" textsize="1.778" layer="47"/>
-<dimension x1="113" y1="17.5" x2="134" y2="17.5" x3="123.5" y3="-12.5" textsize="1.778" layer="47"/>
-<dimension x1="21" y1="17.5" x2="113" y2="17.5" x3="67" y3="-12.5" textsize="1.778" layer="47"/>
-<dimension x1="113" y1="17.5" x2="113" y2="35" x3="147.5" y3="26.25" textsize="1.778" layer="47"/>
-<dimension x1="113" y1="17.5" x2="113" y2="0" x3="147.5" y3="8.75" textsize="1.778" layer="47"/>
-<hole x="5.5" y="17.5" drill="6.1"/>
-<hole x="128.5" y="17.5" drill="6.1"/>
-<text x="22.5" y="22.5" size="2.54" layer="21" font="vector" ratio="15">Bitte diese Terminalversteifung während der Montage/Demontage 
-der Hochstromkabel verschraubt lassen. Danach kann diese 
-Terminalversteifung entfernt werden.</text>
-</plain>
-<libraries>
-</libraries>
-<attributes>
-</attributes>
-<variantdefs>
-</variantdefs>
-<classes>
-<class number="0" name="default" width="0" drill="0">
-</class>
-</classes>
-<designrules name="default">
-<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
-&lt;p&gt;
-Die Standard-Design-Rules sind so gewählt, dass sie für 
-die meisten Anwendungen passen. Sollte ihre Platine 
-besondere Anforderungen haben, treffen Sie die erforderlichen
-Einstellungen hier und speichern die Design Rules unter 
-einem neuen Namen ab.</description>
-<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
-&lt;p&gt;
-The default Design Rules have been set to cover
-a wide range of applications. Your particular design
-may have different requirements, so please make the
-necessary adjustments and save your customized
-design rules under a new name.</description>
-<param name="layerSetup" value="(1*16)"/>
-<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
-<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
-<param name="mdWireWire" value="6mil"/>
-<param name="mdWirePad" value="6mil"/>
-<param name="mdWireVia" value="6mil"/>
-<param name="mdPadPad" value="6mil"/>
-<param name="mdPadVia" value="6mil"/>
-<param name="mdViaVia" value="6mil"/>
-<param name="mdSmdPad" value="6mil"/>
-<param name="mdSmdVia" value="6mil"/>
-<param name="mdSmdSmd" value="6mil"/>
-<param name="mdViaViaSameLayer" value="6mil"/>
-<param name="mnLayersViaInSmd" value="2"/>
-<param name="mdCopperDimension" value="40mil"/>
-<param name="mdDrill" value="6mil"/>
-<param name="mdSmdStop" value="0mil"/>
-<param name="msWidth" value="6mil"/>
-<param name="msDrill" value="0.35mm"/>
-<param name="msMicroVia" value="9.99mm"/>
-<param name="msBlindViaRatio" value="0.5"/>
-<param name="rvPadTop" value="0.25"/>
-<param name="rvPadInner" value="0.25"/>
-<param name="rvPadBottom" value="0.25"/>
-<param name="rvViaOuter" value="0.25"/>
-<param name="rvViaInner" value="0.25"/>
-<param name="rvMicroViaOuter" value="0.25"/>
-<param name="rvMicroViaInner" value="0.25"/>
-<param name="rlMinPadTop" value="10mil"/>
-<param name="rlMaxPadTop" value="20mil"/>
-<param name="rlMinPadInner" value="10mil"/>
-<param name="rlMaxPadInner" value="20mil"/>
-<param name="rlMinPadBottom" value="10mil"/>
-<param name="rlMaxPadBottom" value="20mil"/>
-<param name="rlMinViaOuter" value="8mil"/>
-<param name="rlMaxViaOuter" value="20mil"/>
-<param name="rlMinViaInner" value="8mil"/>
-<param name="rlMaxViaInner" value="20mil"/>
-<param name="rlMinMicroViaOuter" value="4mil"/>
-<param name="rlMaxMicroViaOuter" value="20mil"/>
-<param name="rlMinMicroViaInner" value="4mil"/>
-<param name="rlMaxMicroViaInner" value="20mil"/>
-<param name="psTop" value="-1"/>
-<param name="psBottom" value="-1"/>
-<param name="psFirst" value="-1"/>
-<param name="psElongationLong" value="100"/>
-<param name="psElongationOffset" value="100"/>
-<param name="mvStopFrame" value="1"/>
-<param name="mvCreamFrame" value="0"/>
-<param name="mlMinStopFrame" value="4mil"/>
-<param name="mlMaxStopFrame" value="4mil"/>
-<param name="mlMinCreamFrame" value="0mil"/>
-<param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0mil"/>
-<param name="srRoundness" value="0"/>
-<param name="srMinRoundness" value="0mil"/>
-<param name="srMaxRoundness" value="0mil"/>
-<param name="slThermalIsolate" value="10mil"/>
-<param name="slThermalsForVias" value="0"/>
-<param name="dpMaxLengthDifference" value="10mm"/>
-<param name="dpGapFactor" value="2.5"/>
-<param name="checkAngle" value="0"/>
-<param name="checkFont" value="1"/>
-<param name="checkRestrict" value="1"/>
-<param name="checkStop" value="0"/>
-<param name="checkValues" value="0"/>
-<param name="checkNames" value="1"/>
-<param name="checkWireStubs" value="1"/>
-<param name="checkPolygonWidth" value="0"/>
-<param name="useDiameter" value="13"/>
-<param name="maxErrors" value="50"/>
-</designrules>
-<autorouter>
-<pass name="Default">
-<param name="RoutingGrid" value="50mil"/>
-<param name="AutoGrid" value="1"/>
-<param name="Efforts" value="0"/>
-<param name="TopRouterVariant" value="1"/>
-<param name="tpViaShape" value="round"/>
-<param name="PrefDir.1" value="a"/>
-<param name="PrefDir.2" value="0"/>
-<param name="PrefDir.3" value="0"/>
-<param name="PrefDir.4" value="0"/>
-<param name="PrefDir.5" value="0"/>
-<param name="PrefDir.6" value="0"/>
-<param name="PrefDir.7" value="0"/>
-<param name="PrefDir.8" value="0"/>
-<param name="PrefDir.9" value="0"/>
-<param name="PrefDir.10" value="0"/>
-<param name="PrefDir.11" value="0"/>
-<param name="PrefDir.12" value="0"/>
-<param name="PrefDir.13" value="0"/>
-<param name="PrefDir.14" value="0"/>
-<param name="PrefDir.15" value="0"/>
-<param name="PrefDir.16" value="a"/>
-<param name="cfVia" value="8"/>
-<param name="cfNonPref" value="5"/>
-<param name="cfChangeDir" value="2"/>
-<param name="cfOrthStep" value="2"/>
-<param name="cfDiagStep" value="3"/>
-<param name="cfExtdStep" value="0"/>
-<param name="cfBonusStep" value="1"/>
-<param name="cfMalusStep" value="1"/>
-<param name="cfPadImpact" value="4"/>
-<param name="cfSmdImpact" value="4"/>
-<param name="cfBusImpact" value="0"/>
-<param name="cfHugging" value="3"/>
-<param name="cfAvoid" value="4"/>
-<param name="cfPolygon" value="10"/>
-<param name="cfBase.1" value="0"/>
-<param name="cfBase.2" value="1"/>
-<param name="cfBase.3" value="1"/>
-<param name="cfBase.4" value="1"/>
-<param name="cfBase.5" value="1"/>
-<param name="cfBase.6" value="1"/>
-<param name="cfBase.7" value="1"/>
-<param name="cfBase.8" value="1"/>
-<param name="cfBase.9" value="1"/>
-<param name="cfBase.10" value="1"/>
-<param name="cfBase.11" value="1"/>
-<param name="cfBase.12" value="1"/>
-<param name="cfBase.13" value="1"/>
-<param name="cfBase.14" value="1"/>
-<param name="cfBase.15" value="1"/>
-<param name="cfBase.16" value="0"/>
-<param name="mnVias" value="20"/>
-<param name="mnSegments" value="9999"/>
-<param name="mnExtdSteps" value="9999"/>
-<param name="mnRipupLevel" value="10"/>
-<param name="mnRipupSteps" value="100"/>
-<param name="mnRipupTotal" value="100"/>
-</pass>
-<pass name="Follow-me" refer="Default" active="yes">
-</pass>
-<pass name="Busses" refer="Default" active="yes">
-<param name="cfNonPref" value="4"/>
-<param name="cfBusImpact" value="4"/>
-<param name="cfHugging" value="0"/>
-<param name="mnVias" value="0"/>
-</pass>
-<pass name="Route" refer="Default" active="yes">
-</pass>
-<pass name="Optimize1" refer="Default" active="yes">
-<param name="cfVia" value="99"/>
-<param name="cfExtdStep" value="10"/>
-<param name="cfHugging" value="1"/>
-<param name="mnExtdSteps" value="1"/>
-<param name="mnRipupLevel" value="0"/>
-</pass>
-<pass name="Optimize2" refer="Optimize1" active="yes">
-<param name="cfNonPref" value="0"/>
-<param name="cfChangeDir" value="6"/>
-<param name="cfExtdStep" value="0"/>
-<param name="cfBonusStep" value="2"/>
-<param name="cfMalusStep" value="2"/>
-<param name="cfPadImpact" value="2"/>
-<param name="cfSmdImpact" value="2"/>
-<param name="cfHugging" value="0"/>
-</pass>
-<pass name="Optimize3" refer="Optimize2" active="yes">
-<param name="cfChangeDir" value="8"/>
-<param name="cfPadImpact" value="0"/>
-<param name="cfSmdImpact" value="0"/>
-</pass>
-<pass name="Optimize4" refer="Optimize3" active="yes">
-<param name="cfChangeDir" value="25"/>
-</pass>
-</autorouter>
-<elements>
-</elements>
-<signals>
-</signals>
-<mfgpreviewcolors>
-<mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>
-<mfgpreviewcolor name="silkscreencolor" color="0xFFFEFEFE"/>
-<mfgpreviewcolor name="backgroundcolor" color="0xFF282828"/>
-<mfgpreviewcolor name="coppercolor" color="0xFFFFBF00"/>
-<mfgpreviewcolor name="substratecolor" color="0xFF786E46"/>
-</mfgpreviewcolors>
-</board>
-</drawing>
-<compatibility>
-<note version="6.3" minversion="6.2.2" severity="warning">
-Since Version 6.2.2 text objects can contain more than one line,
-which will not be processed correctly with this version.
-</note>
-</compatibility>
-</eagle>