/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file    usbpd_pwr_user.c
  * @author  MCD Application Team
  * @brief   USBPD PWR user code
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2026 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "usbpd_pwr_user.h"
#include "stm32g4xx_hal.h"
#if defined(_TRACE)
#include "usbpd_core.h"
#include "usbpd_trace.h"
#endif /* _TRACE */

/* USER CODE BEGIN include */

#include "gpio.h"

/* USER CODE END include */

/** @addtogroup BSP
  * @{
  */

/** @addtogroup POWER
  * @{
  */
/** @defgroup POWER_Private_Typedef Private Typedef
  * @{
  */
/* USER CODE BEGIN POWER_Private_Typedef */

/* USER CODE END POWER_Private_Typedef */
/**
  * @}
  */

/** @defgroup POWER_Private_Constants Private Constants
* @{
*/
/* USER CODE BEGIN POWER_Private_Constants */

/* USER CODE END POWER_Private_Constants */
/**
  * @}
  */

/** @defgroup POWER_Private_Macros Private Macros
  * @{
  */
#if defined(_TRACE)
#define PWR_DEBUG_TRACE(_PORT_, __MESSAGE__)  USBPD_TRACE_Add(USBPD_TRACE_DEBUG,    (_PORT_), 0u, (uint8_t*)(__MESSAGE__), sizeof(__MESSAGE__) - 1u)
#else
#define PWR_DEBUG_TRACE(_PORT_, __MESSAGE__)
#endif /* _TRACE */
/* USER CODE BEGIN POWER_Private_Macros */

/* USER CODE END POWER_Private_Macros */
/**
  * @}
  */

/** @defgroup POWER_Private_Variables Private Variables
  * @{
  */
/* USER CODE BEGIN POWER_Private_Variables */

/* USER CODE END POWER_Private_Variables */
/**
  * @}
  */

/** @defgroup POWER_Private_Functions Private Functions
  * @{
  */
/* USER CODE BEGIN POWER_Private_Prototypes */

/* USER CODE END POWER_Private_Prototypes */
/**
  * @}
  */

/** @defgroup POWER_Exported_Variables Exported Variables
  * @{
  */
/* USER CODE BEGIN POWER_Exported_Variables */

/* USER CODE END POWER_Exported_Variables */
/**
  * @}
  */

/** @addtogroup POWER_Exported_Functions
  * @{
  */
/**
  * @brief  Global initialization of PWR resource used by USB-PD
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_Init(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_Init */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_Init */
}

/**
  * @brief  Global de-initialization of PWR resource used by USB-PD
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_Deinit(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_Deinit */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_Deinit");
  }

  return ret;
  /* USER CODE END BSP_USBPD_PWR_Deinit */
}

/**
  * @brief  Assign Power role for current Port (Source or Sink)
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  Role Type-C port role
  *         This parameter can be take one of the following values:
  *         @arg @ref POWER_ROLE_SOURCE
  *         @arg @ref POWER_ROLE_SINK
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_SetRole(uint32_t Instance, USBPD_PWR_PowerRoleTypeDef Role)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_SetRole */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_SetRole");
  }

  return ret;
  /* USER CODE END BSP_USBPD_PWR_SetRole */
}

/**
  * @brief  Set operating mode of Port regarding power saving constraints
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  PwrMode Type-C port power saving mode
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_MODE_OFF
  *         @arg @ref USBPD_PWR_MODE_HIBERNATE
  *         @arg @ref USBPD_PWR_MODE_LOWPOWER
  *         @arg @ref USBPD_PWR_MODE_NORMAL
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_SetPowerMode(uint32_t Instance, USBPD_PWR_PowerModeTypeDef PwrMode)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_SetPowerMode */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_SetPowerMode");
  }

  return ret;
  /* USER CODE END BSP_USBPD_PWR_SetPowerMode */
}

/**
  * @brief  Get operating mode of Port regarding power saving constraints
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  PwrMode Pointer on current Type-C port power saving mode value
  *         Following values are available :
  *         @arg @ref USBPD_PWR_MODE_OFF
  *         @arg @ref USBPD_PWR_MODE_HIBERNATE
  *         @arg @ref USBPD_PWR_MODE_LOWPOWER
  *         @arg @ref USBPD_PWR_MODE_NORMAL
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_GetPowerMode(uint32_t Instance, USBPD_PWR_PowerModeTypeDef *PwrMode)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_GetPowerMode */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_GetPowerMode");
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_GetPowerMode */
}

/**
  * @brief  Initialize the hardware resources used by the Type-C power delivery (PD)
  *         controller.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSInit(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSInit */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
	HAL_GPIO_WritePin(UCPD1_VBUS_GPIO_Port, UCPD1_VBUS_Pin, GPIO_PIN_RESET);
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSInit");
	/* Need to keep DISCHARGE ON as soon as not powering VBUS on MB1397 */
	//DISCHARGE_SET_ON();
  }

  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSInit */
}

/**
  * @brief  Release the hardware resources used by the Type-C power delivery (PD)
  *         controller.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSDeInit(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSDeInit */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSDeInit */
}

/**
  * @brief  Enable power supply over VBUS.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSOn(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSOn */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSOn");
	// Turning discharger off;
	HAL_GPIO_WritePin(UCPD1_VBUS_GPIO_Port, UCPD1_VBUS_Pin, GPIO_PIN_SET);		// Turning Power Source on;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSOn */
}

/**
  * @brief  Disable power supply over VBUS.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSOff(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSOff */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSOff");
	HAL_GPIO_WritePin(UCPD1_VBUS_GPIO_Port, UCPD1_VBUS_Pin, GPIO_PIN_RESET);	// Turning Power Source off
	// Turning on Discharge and waiting till Vbus voltage is at low level (750mV)
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSOff */
}

/**
  * @brief  Set a fixed/variable PDO and manage the power control.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  VbusTargetInmv the vbus Target (in mV)
  * @param  OperatingCurrent the Operating Current (in mA)
  * @param  MaxOperatingCurrent the Max Operating Current (in mA)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_Fixed(uint32_t Instance,
                                           uint32_t VbusTargetInmv,
                                           uint32_t OperatingCurrent,
                                           uint32_t MaxOperatingCurrent)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Fixed */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Fixed */
}

/**
  * @brief  Set a fixed/variable PDO and manage the power control.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  VbusTargetMinInmv the vbus Target min (in mV)
  * @param  VbusTargetMaxInmv the vbus Target max (in mV)
  * @param  OperatingCurrent the Operating Current (in mA)
  * @param  MaxOperatingCurrent the Max Operating Current (in mA)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_Variable(uint32_t Instance,
                                              uint32_t VbusTargetMinInmv,
                                              uint32_t VbusTargetMaxInmv,
                                              uint32_t OperatingCurrent,
                                              uint32_t MaxOperatingCurrent)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Variable */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Variable */
}

/**
  * @brief  Set a Battery PDO and manage the power control.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  VbusTargetMin the vbus Target min (in mV)
  * @param  VbusTargetMax the vbus Target max (in mV)
  * @param  OperatingPower the Operating Power (in mW)
  * @param  MaxOperatingPower the Max Operating Power (in mW)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_Battery(uint32_t Instance,
                                             uint32_t VbusTargetMin,
                                             uint32_t VbusTargetMax,
                                             uint32_t OperatingPower,
                                             uint32_t MaxOperatingPower)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_Battery */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_Battery */
}

/**
  * @brief  Set a APDO and manage the power control.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  VbusTargetInmv the vbus Target (in mV)
  * @param  OperatingCurrent the Operating current (in mA)
  * @param  Delta Delta between with previous APDO (in mV), 0 means APDO start
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSSetVoltage_APDO(uint32_t Instance,
                                          uint32_t VbusTargetInmv,
                                          uint32_t OperatingCurrent,
                                          int32_t Delta)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSSetVoltage_APDO */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSSetVoltage_APDO */
}

/**
  * @brief  Get actual voltage level measured on the VBUS line.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  pVoltage Pointer on measured voltage level (in mV)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSGetVoltage(uint32_t Instance, uint32_t *pVoltage)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSGetVoltage */
  /* Check if instance is valid       */
  int32_t ret;
  uint32_t val = 0U;

  if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pVoltage))
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSGetVoltage");
	val = 5000U;
  }
  *pVoltage = val;
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSGetVoltage */
}

/**
  * @brief  Get actual current level measured on the VBUS line.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  pCurrent Pointer on measured current level (in mA)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSGetCurrent(uint32_t Instance, int32_t *pCurrent)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSGetCurrent */
  /* Check if instance is valid       */
  int32_t ret;

  if ((Instance >= USBPD_PWR_INSTANCES_NBR) || (NULL == pCurrent))
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    *pCurrent = 0;
    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSGetCurrent */
}

/**
  * @brief  Initialize VCONN sourcing.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  CCPinId Type-C CC pin identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_CC1
  *         @arg @ref USBPD_PWR_TYPE_C_CC2
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VCONNInit(uint32_t Instance,
                                uint32_t CCPinId)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNInit */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VCONNInit */
}

/**
  * @brief  Un-Initialize VCONN sourcing.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  CCPinId Type-C CC pin identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_CC1
  *         @arg @ref USBPD_PWR_TYPE_C_CC2
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VCONNDeInit(uint32_t Instance,
                                  uint32_t CCPinId)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNDeInit */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VCONNDeInit */
}

/**
  * @brief  Enable VCONN sourcing.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  CCPinId Type-C CC pin identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_CC1
  *         @arg @ref USBPD_PWR_TYPE_C_CC2
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VCONNOn(uint32_t Instance,
                              uint32_t CCPinId)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNOn */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VCONNOn */
}

/**
  * @brief  Disable VCONN sourcing.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  CCPinId CC pin identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_CC1
  *         @arg @ref USBPD_PWR_TYPE_C_CC2
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VCONNOff(uint32_t Instance,
                               uint32_t CCPinId)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNOff */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VCONNOff */
}

/**
  * @brief  Get actual VCONN status.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  CCPinId Type-C CC pin identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_CC1
  *         @arg @ref USBPD_PWR_TYPE_C_CC2
  * @param  pState VCONN status (1: On, 0: Off)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VCONNIsOn(uint32_t Instance,
                                uint32_t CCPinId, uint8_t *pState)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VCONNIsOn */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  *pState = 0u;
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VCONNIsOn */
}

/**
  * @brief  Set the VBUS disconnection voltage threshold.
  * @note   Callback function registered through BSP_USBPD_PWR_RegisterVBUSDetectCallback
  *         function call is invoked when VBUS falls below programmed threshold.
  * @note   By default VBUS disconnection threshold is set to 3.3V
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  VoltageThreshold VBUS disconnection voltage threshold (in mV)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_SetVBUSDisconnectionThreshold(uint32_t Instance,
                                                    uint32_t VoltageThreshold)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_SetVBUSDisconnectionThreshold */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_SetVBUSDisconnectionThreshold */
}

/**
  * @brief  Register USB Type-C Current callback function.
  * @note   Callback function invoked when VBUS rises above 4V (VBUS present) or
  *         when VBUS falls below programmed threshold (VBUS absent).
  * @note   Callback function is un-registered when callback function pointer
  *         argument is NULL.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  pfnVBUSDetectCallback callback function pointer
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_RegisterVBUSDetectCallback(uint32_t  Instance,
                                                 USBPD_PWR_VBUSDetectCallbackFunc *pfnVBUSDetectCallback)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_RegisterVBUSDetectCallback */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_RegisterVBUSDetectCallback */
}

/**
  * @brief  Get actual VBUS status.
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  pState VBUS status (1: On, 0: Off)
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VBUSIsOn(uint32_t Instance, uint8_t *pState)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VBUSIsOn */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;
  uint8_t state = 0U;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    if (HAL_GPIO_ReadPin(UCPD1_VBUS_GPIO_Port, UCPD1_VBUS_Pin) == GPIO_PIN_SET)
		state = 1U;
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VBUSIsOn");
  }
  *pState = state;
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VBUSIsOn */
}

/**
  * @brief  Set state of VCC (specific functions)
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @param  State VCC state
  * @retval BSP status
  */
__weak int32_t BSP_USBPD_PWR_VCCSetState(uint32_t Instance, uint32_t State)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_VCCSetState */
  /* Check if instance is valid       */
  int32_t ret = BSP_ERROR_NONE;

  if (Instance >= USBPD_PWR_INSTANCES_NBR)
  {
    ret = BSP_ERROR_WRONG_PARAM;
  }
  else
  {
    ret = BSP_ERROR_FEATURE_NOT_SUPPORTED;
    PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_VCCSetState");
  }
  return ret;
  /* USER CODE END BSP_USBPD_PWR_VCCSetState */
}

/**
  * @brief  USBPD PWR callback used to notify a asynchronous PWR event.
  *         (This callback caould be called fromp an IT routine, associated to
  *         any PWR related event detection mechanism)
  * @param  Instance Type-C port identifier
  *         This parameter can be take one of the following values:
  *         @arg @ref USBPD_PWR_TYPE_C_PORT_1
  * @retval None
  */
__weak void BSP_USBPD_PWR_EventCallback(uint32_t Instance)
{
  /* USER CODE BEGIN BSP_USBPD_PWR_EventCallback */
  PWR_DEBUG_TRACE(Instance, "ADVICE: Update BSP_USBPD_PWR_EventCallback");
  /* USER CODE END BSP_USBPD_PWR_EventCallback */
}

/**
  * @}
  */

/** @addtogroup POWER_Private_Functions
  * @{
  */

/* USER CODE BEGIN POWER_Private_Functions */

/* USER CODE END POWER_Private_Functions */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */