Index: trunk/RedCubePressFitBoard/pressfit.kicad_pcb
===================================================================
--- trunk/RedCubePressFitBoard/pressfit.kicad_pcb	(revision 2)
+++ 	(revision )
@@ -1,7177 +1,0 @@
-(kicad_pcb
-	(version 20241229)
-	(generator "pcbnew")
-	(generator_version "9.0")
-	(general
-		(thickness 1.74)
-		(legacy_teardrops no)
-	)
-	(paper "A3" portrait)
-	(layers
-		(0 "F.Cu" signal)
-		(2 "B.Cu" signal)
-		(9 "F.Adhes" user "F.Adhesive")
-		(11 "B.Adhes" user "B.Adhesive")
-		(13 "F.Paste" user)
-		(15 "B.Paste" user)
-		(5 "F.SilkS" user "F.Silkscreen")
-		(7 "B.SilkS" user "B.Silkscreen")
-		(1 "F.Mask" user)
-		(3 "B.Mask" user)
-		(17 "Dwgs.User" user "User.Drawings")
-		(19 "Cmts.User" user "User.Comments")
-		(21 "Eco1.User" user "User.Eco1")
-		(23 "Eco2.User" user "User.Eco2")
-		(25 "Edge.Cuts" user)
-		(27 "Margin" user)
-		(31 "F.CrtYd" user "F.Courtyard")
-		(29 "B.CrtYd" user "B.Courtyard")
-		(35 "F.Fab" user)
-		(33 "B.Fab" user)
-		(39 "User.1" user)
-		(41 "User.2" user "User.2 -Bemaßung")
-		(43 "User.3" user "User.3 - Heatsink")
-		(45 "User.4" user)
-		(47 "User.5" user)
-		(49 "User.6" user)
-		(51 "User.7" user)
-		(53 "User.8" user)
-		(55 "User.9" user)
-	)
-	(setup
-		(stackup
-			(layer "F.SilkS"
-				(type "Top Silk Screen")
-			)
-			(layer "F.Paste"
-				(type "Top Solder Paste")
-			)
-			(layer "F.Mask"
-				(type "Top Solder Mask")
-				(color "Red")
-				(thickness 0.01)
-			)
-			(layer "F.Cu"
-				(type "copper")
-				(thickness 0.07)
-			)
-			(layer "dielectric 1"
-				(type "core")
-				(thickness 1.58)
-				(material "FR4")
-				(epsilon_r 4.5)
-				(loss_tangent 0.02)
-			)
-			(layer "B.Cu"
-				(type "copper")
-				(thickness 0.07)
-			)
-			(layer "B.Mask"
-				(type "Bottom Solder Mask")
-				(thickness 0.01)
-			)
-			(layer "B.Paste"
-				(type "Bottom Solder Paste")
-			)
-			(layer "B.SilkS"
-				(type "Bottom Silk Screen")
-			)
-			(copper_finish "None")
-			(dielectric_constraints no)
-		)
-		(pad_to_mask_clearance 0)
-		(allow_soldermask_bridges_in_footprints no)
-		(tenting front back)
-		(aux_axis_origin 100 120)
-		(grid_origin 173 120)
-		(pcbplotparams
-			(layerselection 0x00000000_00000000_55555555_5755f5ff)
-			(plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000)
-			(disableapertmacros no)
-			(usegerberextensions no)
-			(usegerberattributes yes)
-			(usegerberadvancedattributes yes)
-			(creategerberjobfile yes)
-			(dashed_line_dash_ratio 12.000000)
-			(dashed_line_gap_ratio 3.000000)
-			(svgprecision 4)
-			(plotframeref no)
-			(mode 1)
-			(useauxorigin no)
-			(hpglpennumber 1)
-			(hpglpenspeed 20)
-			(hpglpendiameter 15.000000)
-			(pdf_front_fp_property_popups yes)
-			(pdf_back_fp_property_popups yes)
-			(pdf_metadata yes)
-			(pdf_single_document no)
-			(dxfpolygonmode yes)
-			(dxfimperialunits yes)
-			(dxfusepcbnewfont yes)
-			(psnegative no)
-			(psa4output no)
-			(plot_black_and_white yes)
-			(plotinvisibletext no)
-			(sketchpadsonfab no)
-			(plotpadnumbers no)
-			(hidednponfab no)
-			(sketchdnponfab yes)
-			(crossoutdnponfab yes)
-			(subtractmaskfromsilk no)
-			(outputformat 1)
-			(mirror no)
-			(drillshape 1)
-			(scaleselection 1)
-			(outputdirectory "")
-		)
-	)
-	(net 0 "")
-	(net 1 "GND")
-	(net 2 "BAT+CONTROLED")
-	(net 3 "/chargeControl/SWITCH_OUT")
-	(net 4 "/B+Terminal")
-	(net 5 "unconnected-(H1-Pad1)")
-	(net 6 "unconnected-(H3-Pad1)")
-	(net 7 "unconnected-(H5-Pad1)")
-	(net 8 "unconnected-(H9-Pad1)")
-	(footprint "MountingHole:MountingHole_2.2mm_M2_DIN965_Pad"
-		(layer "F.Cu")
-		(uuid "1ec47d88-b708-4c37-91f7-170794f14407")
-		(at 243 295)
-		(descr "Mounting Hole 2.2mm, M2, DIN965")
-		(tags "mounting hole 2.2mm m2 din965")
-		(property "Reference" "H5"
-			(at 0 -2.9 0)
-			(layer "F.SilkS")
-			(uuid "acbc81eb-de27-42b8-8361-8eac01de90d8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "MountingHole_Pad"
-			(at 0 2.9 0)
-			(layer "F.Fab")
-			(uuid "d72d3135-a218-410a-8059-69abf0bfbc99")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "7bc21e47-e430-4d0a-b938-e34d3f0002c8")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Mounting Hole with connection"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "1bf06e86-5565-4062-8786-f2a69a6f19b1")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "9b7cff28-a398-492c-9dea-e726c5d62f70")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3ea532d1-fd1d-413c-ae00-4116b06e70cd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "64dfcd3b-271d-4214-9f53-ab4774b6d514")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dfbe0be9-ea9f-46fa-9b65-70d63e73b7b2")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "2a841e4a-713b-4a43-abc2-8e349ce3dc89")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "0bb36590-58f1-4361-8564-fd18d8528ffe")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "MountingHole*Pad*")
-		(path "/33dcd0ca-d890-497c-ad50-9a6e3a10ee6a")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.9 0)
-			(stroke
-				(width 0.15)
-				(type solid)
-			)
-			(fill no)
-			(layer "Cmts.User")
-			(uuid "6e4478f8-5f22-4cba-afef-14c1e25ef43e")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 2.15 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "040613bb-3ca5-4902-a81c-158e06f8bed0")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "ac8e4b0e-dbba-4749-8fdd-d9714b44b1f8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 3.8 3.8)
-			(drill 2.2)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 7 "unconnected-(H5-Pad1)")
-			(pinfunction "1")
-			(pintype "input+no_connect")
-			(uuid "6e32e292-2d52-46f0-804d-221244910a41")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "myWürthSHFU:WP-SHFU_7461098_HAL"
-		(layer "F.Cu")
-		(uuid "37f9dadd-4df2-4bc8-8810-c3fa3706f53f")
-		(at 204 165)
-		(descr "WP-SHFU External thread, full plain\nDrill hole specification for HAL\nThread M6 , 25pins\nMax Height = 15.5mm")
-		(property "Reference" "J16"
-			(at 0 8.5 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "eeb26d63-cce6-4040-8dbe-d8f004bea3ee")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-				(justify bottom)
-			)
-		)
-		(property "Value" "Würth RedCube"
-			(at -3.5 8.8 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "d3e479d1-cc0b-499c-9081-1d348c769dc3")
-			(effects
-				(font
-					(size 1.1684 1.1684)
-					(thickness 0.1016)
-				)
-				(justify left bottom)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "366ea1be-ee6b-427b-8ed3-395be56da1ec")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "SCHRAUBANSCHLUSS M6 PRESS FIT 250A"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d8bb14f2-5b8a-4f46-aee0-8460b622e3d0")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "CON521"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a3edfe65-5d46-4071-ad91-73cd41f1cd79")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "7461098"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "53d70083-8fe2-40f3-b31a-24e1492082d1")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "5e469602-d93f-4741-a06e-18f4a8696c0c")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4b980409-687b-46ac-97c6-b10d1ec98c6a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "Würth"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "57fdaea3-9523-4e02-8c63-534b43adb17d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "7743c3e0-bc4f-4bd6-83a3-3b4f931dc780")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "1c935d01-0dcb-4ff9-8a23-553ab0e238a5")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4432c41e-3e50-4a1a-8643-482bd9b1a618")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "TerminalBlock*:*")
-		(path "/cb274230-c4d1-40d2-a738-3d4c8cbe3cb6")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr through_hole)
-		(fp_line
-			(start -6.6 -6.6)
-			(end 6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "06e12ac9-7a13-4858-a88e-e429470a4f8d")
-		)
-		(fp_line
-			(start -6.6 6.6)
-			(end -6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "90d2101d-863e-4232-b116-96920c5ce349")
-		)
-		(fp_line
-			(start 6.6 -6.6)
-			(end 6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "7e253098-81ac-48cc-95f8-c0ab6361588b")
-		)
-		(fp_line
-			(start 6.6 6.6)
-			(end -6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "0905974c-309b-49d0-99b1-08322d968b78")
-		)
-		(fp_poly
-			(pts
-				(xy 6.85 6.85) (xy -6.85 6.85) (xy -6.85 -6.85) (xy 6.85 -6.85)
-			)
-			(stroke
-				(width 0)
-				(type default)
-			)
-			(fill yes)
-			(layer "F.CrtYd")
-			(uuid "692cc78f-1ae4-48ba-843c-97a224be24db")
-		)
-		(fp_line
-			(start -6.5 -6.5)
-			(end 6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "a332b3ac-35ae-4c90-8fbe-87de0ffdb7ce")
-		)
-		(fp_line
-			(start -6.5 6.5)
-			(end -6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "7c2e0252-164c-41ae-a1ba-5c17d1fa285a")
-		)
-		(fp_line
-			(start 6.5 -6.5)
-			(end 6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "2413d5ee-dd57-40d8-84e8-70cb70e2d58e")
-		)
-		(fp_line
-			(start 6.5 6.5)
-			(end -6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "f71feb27-f2cd-4b5a-a6a5-e2b1101eaacb")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "17c8b9cd-67d6-4613-93aa-a3335c3e57af")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "7b2e25a6-a07c-4079-bd73-ee247ed52b25")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "266136e7-ce21-41fa-98a7-ca346323db56")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "8f2cc214-8cdc-4335-ab97-8062346e89bd")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "25d24185-552d-4f5f-a3c9-c9d9258bdd02")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d99c99ad-b6f7-4764-bff7-cf43f9448f07")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "57f281e8-e188-431b-8e0c-0afca6cfb278")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "375ebcec-cb87-4484-91a7-9dc271605a95")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "cad44a88-6538-4164-b5b9-d3dec63c183a")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "477e8173-7a8d-4931-a52c-1334b5ee2bc7")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "3dbe1ceb-3c50-4a78-a2b5-67394363bfd0")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d1bfae20-eefb-45cb-97f9-3fd3a0cf385c")
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "7bcc2920-e83c-4855-9e34-924979156724")
-		)
-		(pad "1" thru_hole circle
-			(at 0 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "02760036-f785-4416-a2d6-14543eb8fcd5")
-		)
-		(pad "1" thru_hole circle
-			(at 0 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "19d5c4f8-cd48-4fac-9ed4-5886b78761cf")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "e813ab69-9c1d-45ca-9c86-15f9506ae61b")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "1db85049-47d1-4bd4-a4c6-a6a8951b9a53")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "db71dd8c-bac6-4ffe-a8bc-856fa4eebc78")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "44e8ce56-ec62-4233-a8aa-a56b7621b197")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c9b61ad4-12bc-4455-afd7-e97b716f9d1c")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b8b105e9-bbe0-4187-858d-e9d5d68bcd14")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "65d36e10-064a-42db-ad66-d811550e1b86")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "7a72f581-7431-4600-8084-366d3058dbb5")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "f5ed0229-b390-4de2-9e13-c446165723a8")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "797428e1-9b0b-4005-af8f-a865e7951e37")
-		)
-		(embedded_fonts no)
-		(model "D:/projekte/Kicad/8.0/3dmodels/würth_shfu_redcube_einpressbolzen/7461098.stp"
-			(offset
-				(xyz 0 0 0)
-			)
-			(scale
-				(xyz 1 1 1)
-			)
-			(rotate
-				(xyz 0 0 0)
-			)
-		)
-	)
-	(footprint "myWürthSHFU:WP-SHFU_7461098_HAL"
-		(layer "F.Cu")
-		(uuid "38d28ba7-524f-4ab5-9ac1-8ed8c4c251ab")
-		(at 204 245)
-		(descr "WP-SHFU External thread, full plain\nDrill hole specification for HAL\nThread M6 , 25pins\nMax Height = 15.5mm")
-		(property "Reference" "J15"
-			(at 0 -7.6 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "6369455e-a1fc-4e02-9398-b550c6857dfa")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-				(justify bottom)
-			)
-		)
-		(property "Value" "Würth RedCube"
-			(at -3.5 8.8 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "62962bdb-f630-462f-9f09-bda44250d2d4")
-			(effects
-				(font
-					(size 1.1684 1.1684)
-					(thickness 0.1016)
-				)
-				(justify left bottom)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3b4f2a53-3822-4be7-95b4-f0f0e389b477")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "SCHRAUBANSCHLUSS M6 PRESS FIT 250A"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "7b1eb072-dd8f-412b-bd55-ad3e2abff874")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "CON521"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dfd285f8-fb21-4f87-8911-22430aebb539")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "7461098"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "1f684c16-b345-4ff9-89b3-fa6a47ed2b62")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "9aba5fca-1577-4b81-b6fe-85c13f0840e8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3590cfc7-e958-44fa-b727-eef8aa3ce5a4")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "Würth"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "57f7f8f1-6030-41b3-9719-7b31c407051a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "0307545c-0a09-4915-a7d3-9b5a812a03f9")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "166582c4-8294-43f4-9472-8dbf458eace8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "44bc7782-1adb-4e64-8a1c-a454b11676b2")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "TerminalBlock*:*")
-		(path "/32c75c69-863f-4bd5-99ba-a833ca4d9182")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr through_hole)
-		(fp_line
-			(start -6.6 -6.6)
-			(end 6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "f8c6c997-c8c0-4016-8d3e-968abeb2927d")
-		)
-		(fp_line
-			(start -6.6 6.6)
-			(end -6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "bdb0df7d-7932-46c7-8d60-916de939c0a1")
-		)
-		(fp_line
-			(start 6.6 -6.6)
-			(end 6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "83772658-337b-402a-8eb8-750d6f004be9")
-		)
-		(fp_line
-			(start 6.6 6.6)
-			(end -6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "14e85fdd-0ab9-40ad-a5f5-71053c548bbf")
-		)
-		(fp_poly
-			(pts
-				(xy 6.85 6.85) (xy -6.85 6.85) (xy -6.85 -6.85) (xy 6.85 -6.85)
-			)
-			(stroke
-				(width 0)
-				(type default)
-			)
-			(fill yes)
-			(layer "F.CrtYd")
-			(uuid "0fae5cd2-f904-4b34-84c7-8bf17c470e58")
-		)
-		(fp_line
-			(start -6.5 -6.5)
-			(end 6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "afa91327-57a8-493c-9f69-0cb3484d3e28")
-		)
-		(fp_line
-			(start -6.5 6.5)
-			(end -6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "ac1797b9-ff54-49fa-afcb-4ccdfb28e430")
-		)
-		(fp_line
-			(start 6.5 -6.5)
-			(end 6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "a891e6e0-2334-430d-9584-9e0e62c01da9")
-		)
-		(fp_line
-			(start 6.5 6.5)
-			(end -6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "4aaa94cb-5054-4ec4-96f7-c54e16c13360")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "87f05ace-5acc-49fd-b987-dc1508c70ad5")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "246dcdf2-aee6-4fd9-8c2f-d9a6489d41a1")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "feb30ef1-8ffb-47b0-a5ff-5a23ed03b7d5")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c2a1012f-0136-4581-83eb-b8d16744a904")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "33f1c354-ca0b-4262-99ee-7979e1fea748")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c9c91225-c2a8-4ff7-bc91-2c6189e636ac")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d73253f9-4df6-48dd-8b5f-244b3a4e66f2")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "e2666bf2-0e91-47f2-899a-7f84b54f6d40")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "573abc5e-6f4a-4b16-ab14-dcb618737807")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "278b8595-3006-4b6f-af2d-0b6966c0d5e8")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "091b1898-a739-42be-ac8f-9c0100f13fa0")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c80f6c82-c7bc-4cb9-a443-9e838789a776")
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "5c7884f0-dc01-48b3-b82b-3243f652b76e")
-		)
-		(pad "1" thru_hole circle
-			(at 0 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "3aaa804d-5289-444b-bbd4-13471b904ff7")
-		)
-		(pad "1" thru_hole circle
-			(at 0 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "64c4f918-b227-4fae-bd63-bef1615dfc55")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "9ee27995-905a-457f-8cde-8633820c6e97")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "1257170e-34f4-4f1f-b585-620fd8a6a3a8")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "64c91559-d7d7-4d8e-b883-6722d67e64f7")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "592dea1b-6e03-4843-b800-66d2bd1eef48")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "0abdb90d-1fc9-4648-b075-e3c60f46d291")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "bcb53a7a-a4f0-49d5-ae15-c8278badf1e6")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "5f6af950-0a0f-4566-b1dc-c43f50f8b0b0")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "5685c693-2288-4d44-ac95-6d9a3061798d")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "96e140d5-e436-418b-8426-5514cd461bb0")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 2 "BAT+CONTROLED")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b60f3ad8-0f42-43a9-80ef-85992fd614a1")
-		)
-		(embedded_fonts no)
-		(model "D:/projekte/Kicad/8.0/3dmodels/würth_shfu_redcube_einpressbolzen/7461098.stp"
-			(offset
-				(xyz 0 0 0)
-			)
-			(scale
-				(xyz 1 1 1)
-			)
-			(rotate
-				(xyz 0 0 0)
-			)
-		)
-	)
-	(footprint "myWürthSHFU:WP-SHFU_7461098_HAL_gewinkelt"
-		(layer "F.Cu")
-		(uuid "3b7fefe3-d14f-4a9e-90f0-d591868ebed2")
-		(at 142 129.25)
-		(descr "WP-SHFU External thread, full plain\nDrill hole specification for HAL\nThread M6 , 25pins\nMax Height = 15.5mm")
-		(property "Reference" "J1"
-			(at 0 -7.6 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(hide yes)
-			(uuid "a21f82b2-f676-4599-96f1-d8870d3b6ac6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-				(justify bottom)
-			)
-		)
-		(property "Value" "Würth RedCube"
-			(at -3.5 8.8 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "64230163-2374-4dbf-8908-e9420b208051")
-			(effects
-				(font
-					(size 1.1684 1.1684)
-					(thickness 0.1016)
-				)
-				(justify left bottom)
-			)
-		)
-		(property "Datasheet" "https://www.we-online.com/de/components/products/REDCUBE_PRESS-FIT_RIGHT_ANGLED_EDGE_POSITION"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "e7a02816-f991-41ce-8447-f75290772e16")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "SCHRAUBANSCHLUSS M6 PRESS FIT 250A"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "e95b5d91-bd55-43ff-acd1-93934e244239")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "CON529"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "698fed63-0f46-4287-a4da-5a17c907cd99")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "74622106"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "5654d78b-f28e-4b91-a6de-88981c0aedf6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "739a9b5e-af9a-4922-a165-8558c79d62ac")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "971bddf7-2883-4064-a552-268f8240379b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "Würth"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "04cd1a3c-2f8e-496b-a450-18ea1768c81b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "992986d2-9143-40bc-aa30-f6eb220c5aec")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "36e63314-2f3a-47c6-b9d7-7e257d81ad5c")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "f5d064ab-2272-409d-9890-03645a32c28f")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "TerminalBlock*:*")
-		(path "/8c864aab-b36a-433f-a345-2eacdf7e8e48")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr through_hole)
-		(fp_line
-			(start -6.6 -6.6)
-			(end 6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "fd97cdb6-d57b-40f0-bed6-723e9e289b64")
-		)
-		(fp_line
-			(start -6.6 6.6)
-			(end -6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "47c6694f-9a5f-41c8-85e2-7c46dc3fd928")
-		)
-		(fp_line
-			(start -6.5 -9.25)
-			(end -6.5 3.75)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "dc7e6c89-68b7-4922-916e-b710d6f7dcd6")
-		)
-		(fp_line
-			(start -6.5 3.75)
-			(end 6.5 3.75)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "32917012-e8c6-4c68-9040-209ccf41df08")
-		)
-		(fp_line
-			(start 6.5 -9.25)
-			(end -6.5 -9.25)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "8a8403cb-9ae8-4d14-812d-a237ac73c3bf")
-		)
-		(fp_line
-			(start 6.5 3.75)
-			(end 6.5 -9.25)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "42e05f38-57a7-42f3-8a78-f64702bb89e9")
-		)
-		(fp_line
-			(start 6.6 -6.6)
-			(end 6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "3252cca7-0907-477d-9636-c26d7231d646")
-		)
-		(fp_line
-			(start 6.6 6.6)
-			(end -6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "2a63722c-6d7f-4e8f-b061-862c2bc48c68")
-		)
-		(fp_poly
-			(pts
-				(xy 6.85 6.85) (xy -6.85 6.85) (xy -6.85 -6.85) (xy 6.85 -6.85)
-			)
-			(stroke
-				(width 0)
-				(type default)
-			)
-			(fill yes)
-			(layer "F.CrtYd")
-			(uuid "7beeb530-62ce-4f5a-8a02-f76c9bf0f66d")
-		)
-		(fp_line
-			(start -6.5 -6.5)
-			(end 6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "d18049a7-0207-43e8-a520-7cae62ed04e0")
-		)
-		(fp_line
-			(start -6.5 6.5)
-			(end -6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "69ee079f-7ec2-4e12-94eb-d1d09c6f0c0c")
-		)
-		(fp_line
-			(start 6.5 -6.5)
-			(end 6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "006af42e-5d67-4ddc-9624-ae9f001011d2")
-		)
-		(fp_line
-			(start 6.5 6.5)
-			(end -6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "0cb14ab2-3bda-47ee-a32c-76cb8c8fda32")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "4bb5829c-546c-4569-aa8b-a69e51e700a3")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "aafbc843-17d4-44ad-a6d9-60f67afbd4f9")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "35027d35-cafa-4fbc-8a2f-6e1d98820ebc")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "637e38b8-155b-4581-8151-7e82598d008d")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "cba74cf0-4ec0-49a8-b115-cdd75f774c7a")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "8dc00d31-2b1b-4b13-bac1-59adf9fd0f4c")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "356aa8da-f0a2-4074-92dc-2202521bf593")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b84f3b8d-e36b-4fdb-8f70-5a6d50a9f5f6")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "78d546f6-8b74-41db-bc67-0f344e70c2c0")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "af068636-e607-475d-85f6-30da8963ebb2")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "e078a617-3c1c-4c99-a2e3-a43cefba7340")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "867d14d1-a13e-4cbb-a8f0-14e29ca961a5")
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "2a6ba24f-3e3f-4ea2-bb39-01b5816d0f97")
-		)
-		(pad "1" thru_hole circle
-			(at 0 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c76568e1-3d7c-4e5f-b8f2-1bfeeb6930e3")
-		)
-		(pad "1" thru_hole circle
-			(at 0 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "99876c73-c9a8-42e5-b2fd-0781a00d2952")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d94d643f-d155-41d8-9fa8-61d2511b2d00")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "56cb545d-3d8e-4ebd-a985-ab191cca4018")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "9b4d337e-701c-4099-a280-3d53ea1b9946")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "8a0928c1-542b-4866-90c0-16f9ea4641c8")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "992380fd-5646-4f9a-a495-18724cb126f1")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "041cec89-f5b0-43ab-9c07-9374e105126b")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "77f6ad28-0781-4c32-8d70-04842ead1b49")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "303b73aa-e43c-438b-afb0-e50afdcbc3d8")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "4f7f8cb5-9618-47b4-ab99-cf2d0711fecf")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c031b86e-d1c8-4b9b-a1ca-e972f3edea1f")
-		)
-		(embedded_fonts no)
-		(model "D:/projekte/Kicad/8.0/3dmodels/würth_shfu_redcube_einpressbolzen/74622106.stp"
-			(offset
-				(xyz 0 2.54 0)
-			)
-			(scale
-				(xyz 1 1 1)
-			)
-			(rotate
-				(xyz -0 -0 -90)
-			)
-		)
-	)
-	(footprint "myHoles:printer_mounting_holes_1mm"
-		(layer "F.Cu")
-		(uuid "477a4379-c48e-448f-9d5f-a5a9eb423762")
-		(at 110.5 294.75)
-		(property "Reference" "H2"
-			(at 0 -2.54 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "c5ed5a3b-0ed3-4fad-a00e-605458815de4")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.1)
-				)
-			)
-		)
-		(property "Value" "PastPrinterHole"
-			(at 0 5.08 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "1d5cbb68-b23e-4f78-97d9-42ca4623b2c2")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "f096caf4-1583-4f16-a9e4-fec1bc9c3bfc")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Past Printer Hole"
-			(at 0 7.62 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "c4ed8b08-ed7e-4ff5-9660-6e728c8aac6a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "5ddeef3e-f1c6-4ad0-839c-bb43d2a913dd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "677211d1-dba5-4695-8744-a39c2cb788d7")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dd30db4c-87fc-4e36-8b50-3dc79cd787cb")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "89f5a383-5ada-41f0-aa92-573a74802f0a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "da8a2082-886c-4134-aab0-0810201e4185")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "5ba7fd75-4294-4a38-bd42-f3b125b9684a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(path "/d2c5cdd4-6fd4-41f3-8e3c-923d5f4a91cc")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.1)
-				(type default)
-			)
-			(fill no)
-			(layer "F.SilkS")
-			(uuid "9914a2db-6c3b-477e-97fe-9c28aed0925a")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.05)
-				(type default)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "f1b93fdf-dea6-4d8d-98bc-c42a69ae9667")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 2.5 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "f808a361-b602-4709-8af5-07350651d65f")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "" np_thru_hole circle
-			(at 0 0)
-			(size 1 1)
-			(drill 1)
-			(layers "*.Cu" "*.Mask")
-			(uuid "9868b159-be9e-4794-933b-cb4bd7a31108")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "MountingHole:MountingHole_2.2mm_M2_DIN965_Pad"
-		(layer "F.Cu")
-		(uuid "4ad5423b-70d1-447f-986f-cf00226ef168")
-		(at 103 125)
-		(descr "Mounting Hole 2.2mm, M2, DIN965")
-		(tags "mounting hole 2.2mm m2 din965")
-		(property "Reference" "H3"
-			(at 0 -2.9 0)
-			(layer "F.SilkS")
-			(uuid "01fada7b-d20a-4adf-a78a-682f4b27e978")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "MountingHole_Pad"
-			(at 0 2.9 0)
-			(layer "F.Fab")
-			(uuid "8ba7e4a7-f1e1-45b7-b24b-c97c0632843d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3f3d8716-da91-4638-996e-75195aa05893")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Mounting Hole with connection"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "b5e2ed41-ccea-40ef-b4e7-522088ab264b")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "c2c4d378-07e6-4764-af5b-8f7370bbbafd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "9a6d6c60-5fe4-421e-9e7d-04d3e142a368")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "41749be5-0b9a-490c-9727-435d42902493")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "94074146-c06f-4677-b100-385c87552399")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "8ffc317a-95e3-4a6b-be7e-474c852caec1")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3a69f389-2d6f-40db-bbb4-386b6c3fe9f0")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "MountingHole*Pad*")
-		(path "/b56f1633-d0b9-49e4-b1cd-5ea7110d3a65")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.9 0)
-			(stroke
-				(width 0.15)
-				(type solid)
-			)
-			(fill no)
-			(layer "Cmts.User")
-			(uuid "5a50c798-c9cf-48ba-ab89-846ac03a993a")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 2.15 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "1691160c-9887-48d2-b0c2-65f1ca121536")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "d7b37df3-8a51-4256-8311-7cdb1958e90c")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 3.8 3.8)
-			(drill 2.2)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 6 "unconnected-(H3-Pad1)")
-			(pinfunction "1")
-			(pintype "input+no_connect")
-			(uuid "dff3debe-a0a4-4199-97c4-cc5ea6070cda")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "myWürthSHFU:WP-SHFU_7461098_HAL"
-		(locked yes)
-		(layer "F.Cu")
-		(uuid "5279abf7-1904-4dbe-ad66-3c0856f44083")
-		(at 142 225)
-		(descr "WP-SHFU External thread, full plain\nDrill hole specification for HAL\nThread M6 , 25pins\nMax Height = 15.5mm")
-		(property "Reference" "J5"
-			(at 0 -7.6 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "cdef8223-cfda-46e7-a31e-621941b40b51")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-				(justify bottom)
-			)
-		)
-		(property "Value" "Würth RedCube"
-			(at -3.5 8.8 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "1ed8d360-a0cd-4414-b292-04914b854037")
-			(effects
-				(font
-					(size 1.1684 1.1684)
-					(thickness 0.1016)
-				)
-				(justify left bottom)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "b467e2e5-60f5-4785-9b82-b10dec9483d0")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "SCHRAUBANSCHLUSS M6 PRESS FIT 250A"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "beb3f83d-3368-43b1-8c01-17675904d274")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "CON521"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "cec601a8-2410-4777-9a20-f279ffb23ea6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "7461098"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "540d7181-8397-40bf-ac74-2e917a842fad")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "24a27c04-a023-460a-a8e2-a99e12fa7a4b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "004b3a84-c904-4585-94c0-e4a158ab4ae8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "Würth"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "857310de-a7e0-47b0-b9e9-d8282048da9f")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "148d4e7f-d418-4daa-ab60-a8ac3f72a156")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "86924a81-0430-4e9d-8698-b5871c361b78")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "9a137f4b-dddf-42fd-9c02-386e8f6def4e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "TerminalBlock*:*")
-		(path "/9f866409-de60-4e97-86d5-eca7fac5e40b")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr through_hole)
-		(fp_line
-			(start -6.6 -6.6)
-			(end 6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "6f9c21fa-953a-4af9-bf9f-7506e023a796")
-		)
-		(fp_line
-			(start -6.6 6.6)
-			(end -6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "37b3b3d7-3314-40c7-a902-d7d1fcbc38cd")
-		)
-		(fp_line
-			(start 6.6 -6.6)
-			(end 6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "83141a5d-250a-44ad-a168-842370e14e80")
-		)
-		(fp_line
-			(start 6.6 6.6)
-			(end -6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "422b259f-01bc-4f94-b0e8-6b456fb7f686")
-		)
-		(fp_poly
-			(pts
-				(xy 6.85 6.85) (xy -6.85 6.85) (xy -6.85 -6.85) (xy 6.85 -6.85)
-			)
-			(stroke
-				(width 0)
-				(type default)
-			)
-			(fill yes)
-			(layer "F.CrtYd")
-			(uuid "2dc6c176-581d-4430-95bf-17b1b621e158")
-		)
-		(fp_line
-			(start -6.5 -6.5)
-			(end 6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "d1be75e9-2995-4c9d-ad6d-d723dc1edc90")
-		)
-		(fp_line
-			(start -6.5 6.5)
-			(end -6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "fbf27ed8-d804-4939-adbd-084bc46dc85f")
-		)
-		(fp_line
-			(start 6.5 -6.5)
-			(end 6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "0970c065-c48f-4424-afd5-070de0527186")
-		)
-		(fp_line
-			(start 6.5 6.5)
-			(end -6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "7e10117b-0ed2-4533-b6fa-009a23ebbed1")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "80fb9c12-a8b6-46c7-b8d1-6fb9a3a988d9")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "41995799-470b-4e9f-8623-523af0a8507a")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d631833a-a88e-4252-b7ed-32ef430fe589")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "5adaf990-72d2-4f47-a069-a4fc7a3fd6a8")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "6bdda8e2-8745-4064-a3bc-f3dc44bc64ac")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "2e13a7c4-6617-4973-9a04-f2cdea15daed")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ed80d351-75df-4525-8cd8-bbe200d947bd")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "0394a087-739d-4cd5-9894-9cb62dbc596f")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "3d685c44-b9dc-47d0-9bd4-b3b147194db3")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "e10ee529-599d-4299-823b-0cbb6ce5ad41")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "49227aab-6448-416a-88fc-61f72f472793")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "8cd68ee5-a01c-488e-bbc2-7986c9d82e02")
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "cf7526a0-e105-43f2-9465-1bbc2308a8b3")
-		)
-		(pad "1" thru_hole circle
-			(at 0 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "bfa8049c-4285-4d17-8f84-6409e64dfd82")
-		)
-		(pad "1" thru_hole circle
-			(at 0 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "020816e1-793c-4a08-ae01-cc814e4acf09")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "03274a4f-2dde-4bc5-bab6-8fe2f2c79d84")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "9f55f2fd-2785-4e2e-86d6-72a81c603933")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "6f7ae6f8-ea90-4d42-a356-50264ae718c5")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b3b7aff6-4f49-4a01-a369-c800c4764c36")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "1c15aece-113b-4678-9410-c5cba4c97842")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "e849b042-4a18-4d7c-bbda-7d11233d91c4")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c964d0fd-b99e-4b6f-b4e8-9cc934e7c28c")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "1c36613e-3ed6-40cb-a68f-98e40e420206")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "cb8afb2c-301e-451b-b32c-74abd8271a6a")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 3 "/chargeControl/SWITCH_OUT")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "7160cd65-7550-40e9-8ea0-82984998f729")
-		)
-		(embedded_fonts no)
-		(model "D:/projekte/Kicad/8.0/3dmodels/würth_shfu_redcube_einpressbolzen/7461098.stp"
-			(offset
-				(xyz 0 0 0)
-			)
-			(scale
-				(xyz 1 1 1)
-			)
-			(rotate
-				(xyz 0 0 0)
-			)
-		)
-	)
-	(footprint "Fiducial:Fiducial_1mm_Mask3mm"
-		(layer "F.Cu")
-		(uuid "5ffb2df7-885b-4575-b3e6-6f47e5e6c0d1")
-		(at 228 295)
-		(descr "Circular Fiducial, 1mm bare copper, 3mm soldermask opening (recommended)")
-		(tags "fiducial")
-		(property "Reference" "FID3"
-			(at 0 -2.54 0)
-			(layer "F.SilkS")
-			(uuid "9bc8cba6-48ca-4db0-93e3-a439dcb9f4c6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "Fiducial"
-			(at 0 2.286 0)
-			(layer "F.Fab")
-			(uuid "d02cab08-8835-44c3-9cdd-66bc2c235d35")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "b6ac4e25-fd32-4d55-bcc1-f98ac0af221e")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Fiducial Marker"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a6520b7c-2f3d-416c-ad1d-e862b442e283")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "8170d350-957d-4c1d-ad85-bbd5a95ecb74")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "b5112c9d-6c96-460a-b2ed-1a6f7756bbfa")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "5f9a0069-6f98-4576-ab1d-b96ba5f5a84b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4910d8a5-ddd5-44eb-a314-a61ee416b785")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "bfb2d53e-432c-4d1b-aaaa-47ad286a4831")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "b1a8816c-7a14-4042-b3f7-d05ca71771a8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dc662c09-a29c-4b7a-a8d6-588875df190d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "968ddcaf-9e00-4090-92cd-4881f7e43d15")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "Fiducial*")
-		(path "/d0236751-8fd6-4dfc-ba19-eb335c11a859")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr smd exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.75 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "4526693e-fb94-4648-8e08-240c4cd5a6b8")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1.5 0)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.Fab")
-			(uuid "85065bf8-12d8-42dc-9106-97a38c310f03")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "d8d3f31d-8982-45c0-a040-6098fe07c062")
-			(effects
-				(font
-					(size 0.4 0.4)
-					(thickness 0.06)
-				)
-			)
-		)
-		(pad "" smd circle
-			(at 0 0)
-			(size 1 1)
-			(layers "F.Cu" "F.Mask")
-			(solder_mask_margin 1)
-			(clearance 1)
-			(uuid "3b1871a4-4910-4abe-8e02-ed64000081bc")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "MountingHole:MountingHole_2.2mm_M2_DIN965_Pad"
-		(layer "F.Cu")
-		(uuid "619bca11-a17d-4c4a-8bcf-d19563f78b91")
-		(at 243 125)
-		(descr "Mounting Hole 2.2mm, M2, DIN965")
-		(tags "mounting hole 2.2mm m2 din965")
-		(property "Reference" "H9"
-			(at 0 3.5 0)
-			(layer "F.SilkS")
-			(uuid "38c22ba8-80af-4bf0-914f-f4953b46ddbc")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "MountingHole_Pad"
-			(at 0 2.9 0)
-			(layer "F.Fab")
-			(uuid "87dc1f56-f23d-4e21-ad30-24df9e99d87b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4da329d5-d838-4d58-9859-ae972b694c33")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Mounting Hole with connection"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dcd89fa4-e42f-46f1-86cd-74f0e733bea7")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d6ae7b22-12a8-4324-9a51-91858d60f70d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a5675855-adef-4e92-829d-04f4a7653925")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "fa74398a-a35f-4fa9-a721-14c3787095da")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "6e59b506-0fd8-46ee-a97f-0bba0da268ed")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "68d378a4-d704-4dd4-a8e6-3dfed9c60023")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "0f176c0a-3e6e-4c36-81f2-4d7e56a723a9")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "MountingHole*Pad*")
-		(path "/01ffa3c0-8f36-4205-a7d2-33118f82ae63")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.9 0)
-			(stroke
-				(width 0.15)
-				(type solid)
-			)
-			(fill no)
-			(layer "Cmts.User")
-			(uuid "e56cc4a3-bb0b-4695-b006-67888d91b36f")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 2.15 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "079b19b3-11bc-43b4-9b41-b16854395504")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "080c4159-d73a-4971-a13c-ae2d557b5849")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 3.8 3.8)
-			(drill 2.2)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 8 "unconnected-(H9-Pad1)")
-			(pinfunction "1")
-			(pintype "input+no_connect")
-			(uuid "11641d12-6e3b-41dd-b377-7f99a55b0f79")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "myHoles:printer_mounting_holes_1mm"
-		(layer "F.Cu")
-		(uuid "8b77cb70-e320-45ff-b4c3-ed83fde94006")
-		(at 110.5 125)
-		(property "Reference" "H4"
-			(at 0 -2.54 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "75ad2039-b9ce-421d-b2d6-afa14cceeff1")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.1)
-				)
-			)
-		)
-		(property "Value" "PastPrinterHole"
-			(at 0 5.08 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "c9ae38c0-4c38-4c6a-80b8-2abbc3b92767")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "92cc2413-8434-4c69-b890-4aaae41e1520")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Past Printer Hole"
-			(at 0 7.62 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "ca461c9a-99e6-4c5b-8a82-3e3e9298af5a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "2e21ab11-2673-427f-a296-0285b6712058")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "898e853a-a94b-4c19-b931-de44e8c9b6fd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "cc861490-ce87-4497-ab1c-b89da6b75099")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "ed815e8c-d37c-4d5a-b150-9978dde5987e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "80fa77bf-b1e0-4328-b6f3-c23780fbefcb")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "70c6c446-ea97-434c-bb88-8e0b98c6c2b2")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(path "/677b4100-1095-4bc0-9deb-8babf712862e")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.1)
-				(type default)
-			)
-			(fill no)
-			(layer "F.SilkS")
-			(uuid "bb3d58e9-4e52-4b20-90ee-030d76e266db")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.05)
-				(type default)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "033b161b-78dc-40a5-b787-a44bd850f7f7")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 2.5 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "1b7b9ba8-0e4f-4d4a-b25c-e3a2c2f79dc1")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "" np_thru_hole circle
-			(at 0 0)
-			(size 1 1)
-			(drill 1)
-			(layers "*.Cu" "*.Mask")
-			(uuid "af681ea8-2472-43a5-bdc4-bd350fbf7eaf")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "myWürthSHFU:WP-SHFU_7461098_HAL"
-		(locked yes)
-		(layer "F.Cu")
-		(uuid "9e41e515-f8c0-4d0c-a299-48418aab0b8e")
-		(at 142 165)
-		(descr "WP-SHFU External thread, full plain\nDrill hole specification for HAL\nThread M6 , 25pins\nMax Height = 15.5mm")
-		(property "Reference" "J4"
-			(at 0 -7.6 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "513c783c-5297-43a2-ba18-f03f506045f8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-				(justify bottom)
-			)
-		)
-		(property "Value" "Würth RedCube"
-			(at -3.5 8.8 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "506e1b97-e4d9-4f54-b0ee-78fd26de9da8")
-			(effects
-				(font
-					(size 1.1684 1.1684)
-					(thickness 0.1016)
-				)
-				(justify left bottom)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "6ccabf11-2126-4376-848a-231a20884638")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "SCHRAUBANSCHLUSS M6 PRESS FIT 250A"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4417a627-3024-4b4e-9ddc-c76748382b11")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "CON521"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "15eb1017-b940-4be2-9a96-f9ee770811fd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "7461098"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "79988b76-a5c4-484e-8b45-f84a9a87370e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "e3e82340-2cb3-42ad-93c7-5626dd9c2e14")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "17e07f4b-f47f-48a6-b841-18e82140f3a4")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "Würth"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "2779a054-51a1-4f4b-9daa-ac79540ea394")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4c692579-676c-43f4-8110-6dda6cb1cda2")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "8e520d8e-7b22-4f1a-86f7-2a5b04da78fa")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dbea706e-ba0d-457e-8391-3dfb932772c1")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "TerminalBlock*:*")
-		(path "/a32336a8-a9c9-4273-9552-3fc0cd844afd")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr through_hole)
-		(fp_line
-			(start -6.6 -6.6)
-			(end 6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "336c738a-84b7-4f53-88a7-98db30fc6f3b")
-		)
-		(fp_line
-			(start -6.6 6.6)
-			(end -6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "35fc2298-503f-4347-8a7d-1099e3b32611")
-		)
-		(fp_line
-			(start 6.6 -6.6)
-			(end 6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "99e096bd-36a8-4894-86ef-2bb94715cd75")
-		)
-		(fp_line
-			(start 6.6 6.6)
-			(end -6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "ecfb7356-1b5f-43f5-a757-3607e8f0ba6d")
-		)
-		(fp_poly
-			(pts
-				(xy 6.85 6.85) (xy -6.85 6.85) (xy -6.85 -6.85) (xy 6.85 -6.85)
-			)
-			(stroke
-				(width 0)
-				(type default)
-			)
-			(fill yes)
-			(layer "F.CrtYd")
-			(uuid "a152ac6c-a06f-4c51-88e8-2bc101c92005")
-		)
-		(fp_line
-			(start -6.5 -6.5)
-			(end 6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "194726ab-e192-444a-bc9c-635ed17c30e7")
-		)
-		(fp_line
-			(start -6.5 6.5)
-			(end -6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "6503c218-7e8c-4ed3-8bd8-65fbc6da0a1d")
-		)
-		(fp_line
-			(start 6.5 -6.5)
-			(end 6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "1aa470d0-9b5a-4a5d-b923-b5830fa56f24")
-		)
-		(fp_line
-			(start 6.5 6.5)
-			(end -6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "7aa4d942-15a2-42ed-afcb-9c176ef24776")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "0e2d3840-1499-476e-a3fa-56dcf6e06c7a")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "afc7f2f5-746f-4970-914b-3293e666543c")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "43ad4dab-4907-4c3b-be16-e38a7304d453")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "f1b0b6dd-9782-4157-8a33-5a42236f8432")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b0cbe57a-9309-4423-a0ef-daa4318da31e")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "9d143c1b-8071-4508-a8e2-950dbd865aab")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ef2c631b-7411-4bcf-b2f6-8c19f6dbbc3a")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ed163aea-c14c-421a-8178-c5bd697472d1")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "830dcb10-2eaa-439f-ba64-49556daacd71")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ae9bd6a6-77a4-4b88-8ab3-522b990e2628")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "eaa34e7d-d701-4ac5-8c41-fb7af59fa0d9")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "02333063-67b2-4a2f-a06f-9df123161949")
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "687b7099-0cb1-47d2-bd08-3d5684047a40")
-		)
-		(pad "1" thru_hole circle
-			(at 0 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "9cc6442d-293c-47ab-9861-735f72ca9e9a")
-		)
-		(pad "1" thru_hole circle
-			(at 0 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "1510a0d9-ae9f-479a-b424-5c1bc845f180")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "0b56be17-b5e1-41c7-b572-cbc57f99a5f9")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "925a65e5-365b-414a-9dfb-0367453a30a4")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "67beb654-df58-40fd-84a6-e30752ef2f08")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "a51e384a-e209-4e04-92ea-b77b0f743c17")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ec85bdb5-aa47-4097-988d-9b4208ae1106")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "e883282d-7ac0-4d3b-b8d3-0bdd0f24edfe")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "c7a8662e-11f8-4936-bfa1-746307998898")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "9e2eab15-0765-42e7-a0b6-f5722b8a31e6")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "3c421817-7cc5-48e5-95f8-55854520d390")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 4 "/B+Terminal")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b3ab873d-aed8-4653-aa72-10dc2fa1e2da")
-		)
-		(embedded_fonts no)
-		(model "D:/projekte/Kicad/8.0/3dmodels/würth_shfu_redcube_einpressbolzen/7461098.stp"
-			(offset
-				(xyz 0 0 0)
-			)
-			(scale
-				(xyz 1 1 1)
-			)
-			(rotate
-				(xyz 0 0 0)
-			)
-		)
-	)
-	(footprint "myHoles:printer_mounting_holes_1mm"
-		(layer "F.Cu")
-		(uuid "a6560c31-568b-4aab-90e6-e5dd3c909079")
-		(at 235.5 295)
-		(property "Reference" "H8"
-			(at 0 -2.54 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "1895544f-72f5-4ec1-bc51-014cd7a59919")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.1)
-				)
-			)
-		)
-		(property "Value" "PastPrinterHole"
-			(at 0 5.08 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "dfb573bd-c790-4224-be6d-62394e7273f5")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "abae1f12-c49f-46f7-a49d-5059733d47b7")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Past Printer Hole"
-			(at 0 7.62 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "6459833e-1e87-4a1d-84b0-fb13aebc431d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d988c439-63b6-477f-b59f-9b41a384f708")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "af076fb0-8d37-4309-a39b-690520c78ecb")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "075d221e-3efe-4fa3-a869-2a95b6835d11")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "f7f188d7-ccd3-42bd-a6d5-cb0049de2111")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3a904cf8-b52a-40bd-99ba-de8f9f3ee6c7")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "72267fdf-4af5-4412-a94e-3257fc309a85")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(path "/407be68d-44df-4e73-bb0f-f94cf70703ea")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.1)
-				(type default)
-			)
-			(fill no)
-			(layer "F.SilkS")
-			(uuid "4c1292cc-0862-46a3-b97f-71ee37b181fc")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.05)
-				(type default)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "9bd88ff0-1bed-4db2-aee4-23572dc8ce22")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 2.5 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "29b87d7c-b79a-4af1-91e5-f3405937f157")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "" np_thru_hole circle
-			(at 0 0)
-			(size 1 1)
-			(drill 1)
-			(layers "*.Cu" "*.Mask")
-			(uuid "029e66dd-adbe-4254-b37c-452cd0f03b46")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "myHoles:printer_mounting_holes_1mm"
-		(layer "F.Cu")
-		(uuid "aea6b7cb-61b2-4cf8-832e-33028b9ad0f8")
-		(at 235.5 125)
-		(property "Reference" "H6"
-			(at 0 -2.54 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "115927a0-e82f-4902-83a9-08f971a0f76d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.1)
-				)
-			)
-		)
-		(property "Value" "PastPrinterHole"
-			(at 0 5.08 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "0ff68478-2ee6-45b4-8077-5033ea3a0e37")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "c7ad3a92-7a6c-44c6-b295-009527f445c3")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Past Printer Hole"
-			(at 0 7.62 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "4dc01814-bba2-4641-b2d3-f961d14296fd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "c70846c2-74f7-4614-9b86-58c07d4df601")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a86cb2c1-13e6-4996-851b-17edbf443bdf")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "1c7e5515-474e-4416-987d-730443002021")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "3531fe48-5a7d-4cd6-a138-d2203d2bd77f")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "751e9af1-9a41-48e1-bdb4-fb359f9ef020")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "ead1ca96-9936-4c30-bdcb-18ea2530ebf4")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(path "/593929fd-aa92-4780-8250-cdd745c73e4e")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.1)
-				(type default)
-			)
-			(fill no)
-			(layer "F.SilkS")
-			(uuid "867c0053-dc4b-473d-8ef4-cbc698ec62e2")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1 0)
-			(stroke
-				(width 0.05)
-				(type default)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "17b2e9d9-5bb6-4e2a-89ee-df626a1a3c1e")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 2.5 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "4db4dfd3-1c83-4eaf-bcdc-f4233dd25748")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "" np_thru_hole circle
-			(at 0 0)
-			(size 1 1)
-			(drill 1)
-			(layers "*.Cu" "*.Mask")
-			(uuid "4f3cb9a0-a30c-4aa7-861c-d3c9ed0fa2b6")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "myWürthSHFU:WP-SHFU_7461098_HAL_gewinkelt"
-		(layer "F.Cu")
-		(uuid "c6f8f7da-1d4d-486f-b17b-7d429373c81e")
-		(at 204 129.25)
-		(descr "WP-SHFU External thread, full plain\nDrill hole specification for HAL\nThread M6 , 25pins\nMax Height = 15.5mm")
-		(property "Reference" "J2"
-			(at 0 -7.6 0)
-			(unlocked yes)
-			(layer "F.SilkS")
-			(uuid "f4e0a1fa-3020-477f-a49a-dd8c83cb9d61")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-				(justify bottom)
-			)
-		)
-		(property "Value" "Würth RedCube"
-			(at -3.5 8.8 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(uuid "eb3b4c2f-a09c-4d21-88b7-83facc3f4464")
-			(effects
-				(font
-					(size 1.1684 1.1684)
-					(thickness 0.1016)
-				)
-				(justify left bottom)
-			)
-		)
-		(property "Datasheet" "https://www.we-online.com/de/components/products/REDCUBE_PRESS-FIT_RIGHT_ANGLED_EDGE_POSITION"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a09d7ade-a7d1-4b07-a117-5583d7b3c075")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "SCHRAUBANSCHLUSS M6 PRESS FIT 250A"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "f68c6793-8c64-4a6d-8572-b271a654dd70")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "CON529"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "15b1e31d-3a90-4609-9753-9897626d6e3b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "74622106"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "01c4d419-7dda-424b-a2d5-da7c733eabec")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d4c59afe-bcc2-447a-b3d8-e85bc6906606")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "6e893e84-87a5-4406-93a0-e97f58c5f114")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "Würth"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "1de25541-74a5-4215-a05f-457faf5ef31f")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "f15e81f5-48cd-42a0-9109-17914667c1d5")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "286ab33b-57d0-4970-9ec5-abaf00c050e7")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "7ac9ab6c-43b7-47ea-9312-462cfb620677")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "TerminalBlock*:*")
-		(path "/7dd09515-a35f-463b-bd8d-d919fb13dadd")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr through_hole)
-		(fp_line
-			(start -6.6 -6.6)
-			(end 6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "ba009929-50b1-4d77-b794-c890950a08cb")
-		)
-		(fp_line
-			(start -6.6 6.6)
-			(end -6.6 -6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "ee38b98b-69de-4f85-ad38-939ec78875c9")
-		)
-		(fp_line
-			(start -6.5 -9.25)
-			(end -6.5 3.75)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "9573e767-5828-4bac-843f-d3f9f6df2c5b")
-		)
-		(fp_line
-			(start -6.5 3.75)
-			(end 6.5 3.75)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "587a9ed6-b3d7-4143-88b7-2447a47fedac")
-		)
-		(fp_line
-			(start 6.5 -9.25)
-			(end -6.5 -9.25)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "7a38ccf9-8fbc-4911-bf4a-cd9bba1ec061")
-		)
-		(fp_line
-			(start 6.5 3.75)
-			(end 6.5 -9.25)
-			(stroke
-				(width 0.2)
-				(type dash)
-			)
-			(layer "F.SilkS")
-			(uuid "6057458f-fd09-48ef-a902-34df0d643a9a")
-		)
-		(fp_line
-			(start 6.6 -6.6)
-			(end 6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "9dd4293d-6b8b-48cb-acb5-c9a05d5a18df")
-		)
-		(fp_line
-			(start 6.6 6.6)
-			(end -6.6 6.6)
-			(stroke
-				(width 0.2)
-				(type solid)
-			)
-			(layer "F.SilkS")
-			(uuid "357720e0-f299-459a-a171-f755e5a7671d")
-		)
-		(fp_poly
-			(pts
-				(xy 6.85 6.85) (xy -6.85 6.85) (xy -6.85 -6.85) (xy 6.85 -6.85)
-			)
-			(stroke
-				(width 0)
-				(type default)
-			)
-			(fill yes)
-			(layer "F.CrtYd")
-			(uuid "9bc42ddd-11b9-400d-b2aa-cb033c4b9a19")
-		)
-		(fp_line
-			(start -6.5 -6.5)
-			(end 6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "8465b2a0-cd1c-4798-a57f-e37ccd007318")
-		)
-		(fp_line
-			(start -6.5 6.5)
-			(end -6.5 -6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "94dd1715-a8a7-433d-8d66-7aa01efb4361")
-		)
-		(fp_line
-			(start 6.5 -6.5)
-			(end 6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "b48ed456-165c-4be9-a15c-71c6cb82b9ea")
-		)
-		(fp_line
-			(start 6.5 6.5)
-			(end -6.5 6.5)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(layer "F.Fab")
-			(uuid "9cee306f-dcdd-412c-9c47-8afbd1e36f9c")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "715a16b5-1cf1-4684-9363-0773e5fc106c")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b198645d-fe62-420b-bdfa-63e7a13578f5")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ed64ebf1-2d29-4b76-a935-b64ee3ce1241")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "3fcaca0a-dff1-4af1-9aac-1c73def955ca")
-		)
-		(pad "1" thru_hole circle
-			(at -5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "50a73491-d4eb-4134-a15b-494673b611d3")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "040987b8-ca53-4c43-b259-2498a5e03059")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "653c6fd4-5eac-4db9-a660-162c5157a4d9")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d055895d-7193-4163-b6b0-c9857d11f40a")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "0530d85d-484c-4c41-857f-02048f2972d8")
-		)
-		(pad "1" thru_hole circle
-			(at -2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "de4630b6-1437-4203-8e9c-c75a487064df")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ad5ec4a2-afc0-4ff7-a948-133257c4fcfc")
-		)
-		(pad "1" thru_hole circle
-			(at 0 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "84b72d73-5c8f-4b78-8a3c-54dcd8c5ffe3")
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "f79eb5da-a0fb-453f-ad48-e7a78fe7df5b")
-		)
-		(pad "1" thru_hole circle
-			(at 0 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "18a528c8-c03d-4bc7-8381-7ce3f48d9fea")
-		)
-		(pad "1" thru_hole circle
-			(at 0 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "f7e94eee-c396-41d7-8a81-da68d1b94198")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "ab45a5f4-5447-4ca9-b000-3d6e4315b27c")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "dbe2a66d-4d87-4374-8154-aee7783cc588")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "328e89ed-69a5-4e56-bc1d-76be3a788d1b")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "568d4a23-b608-4912-8cac-9b8c0ac2174b")
-		)
-		(pad "1" thru_hole circle
-			(at 2.54 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "d4ebdfc4-a9d4-434f-8825-1841254780e1")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "1786629b-a6a2-4f12-97b1-7fd810e7ba11")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 -2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "23296641-f92d-4f2c-8dc7-85d007c382cd")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 0)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "b9d4fc8b-5eeb-4be7-a354-2e9a06928c84")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 2.54)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "3a167b72-7590-4c7e-b1aa-b61bc49732fc")
-		)
-		(pad "1" thru_hole circle
-			(at 5.08 5.08)
-			(size 2.2 1.8)
-			(drill 1.7)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 1 "GND")
-			(pinfunction "Pin_1")
-			(pintype "passive")
-			(solder_mask_margin 0.1016)
-			(thermal_bridge_angle 0)
-			(uuid "64d7fd38-9e46-4210-8378-cd296e507699")
-		)
-		(embedded_fonts no)
-		(model "D:/projekte/Kicad/8.0/3dmodels/würth_shfu_redcube_einpressbolzen/74622106.stp"
-			(offset
-				(xyz 0 2.54 0)
-			)
-			(scale
-				(xyz 1 1 1)
-			)
-			(rotate
-				(xyz -0 -0 -90)
-			)
-		)
-	)
-	(footprint "MountingHole:MountingHole_2.2mm_M2_DIN965_Pad"
-		(layer "F.Cu")
-		(uuid "c87311b8-42f8-499f-8e5b-e4e79ed2382d")
-		(at 103 295)
-		(descr "Mounting Hole 2.2mm, M2, DIN965")
-		(tags "mounting hole 2.2mm m2 din965")
-		(property "Reference" "H1"
-			(at 0 -2.9 0)
-			(layer "F.SilkS")
-			(uuid "2a8c3ece-14f6-4fe3-a14b-3b6b26e3879b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "MountingHole_Pad"
-			(at 0 2.9 0)
-			(layer "F.Fab")
-			(uuid "deb84df5-b922-4b01-b0cf-fd20d64d3550")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "69501609-ee7c-4616-8cb5-bc593399ea7d")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Mounting Hole with connection"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "08d39a70-8bdc-4508-b388-a2e56fd462df")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "793ad5c9-4369-4f28-be75-f8e9510aa7f3")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d2076169-9be1-4d55-b072-f860a82784aa")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "fef87c55-8aef-4918-aee1-43fde384f09c")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "56cb987a-c6fb-42a1-9353-680d093ac6a8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d6ae3599-1c4f-4688-b46e-ce869a18ea2d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "afa689a0-a2a4-4d9e-8de7-4f49dc7dbaa8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "MountingHole*Pad*")
-		(path "/7739b16e-fba9-43c9-af73-46dfcb628882")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr exclude_from_pos_files exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.9 0)
-			(stroke
-				(width 0.15)
-				(type solid)
-			)
-			(fill no)
-			(layer "Cmts.User")
-			(uuid "df26788a-d5de-4066-93c1-49c7de010385")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 2.15 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "ab733a11-ef2f-4a30-9ecd-4ad136ffd72a")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "c7367338-0ed9-48c2-bbbe-6d4f92aabdf1")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(pad "1" thru_hole circle
-			(at 0 0)
-			(size 3.8 3.8)
-			(drill 2.2)
-			(layers "*.Cu" "*.Mask")
-			(remove_unused_layers no)
-			(net 5 "unconnected-(H1-Pad1)")
-			(pinfunction "1")
-			(pintype "input+no_connect")
-			(uuid "d6557e87-6cb7-40fa-acc4-d42a94443843")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "Fiducial:Fiducial_1mm_Mask3mm"
-		(layer "F.Cu")
-		(uuid "d15982f0-ef78-45c0-8ef4-398ccdbaa5cc")
-		(at 118 295)
-		(descr "Circular Fiducial, 1mm bare copper, 3mm soldermask opening (recommended)")
-		(tags "fiducial")
-		(property "Reference" "FID1"
-			(at 0 -2.54 0)
-			(layer "F.SilkS")
-			(uuid "c1dc10de-21c7-4475-b715-1f4768e8b97b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "Fiducial"
-			(at 0 2.286 0)
-			(layer "F.Fab")
-			(uuid "5d0edcb0-d612-4d1f-afe4-c2f90c26e3b8")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "22a58ec0-b077-4137-a0af-9d3c4d1de622")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Fiducial Marker"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "c65b0ef7-928a-4bac-aa4e-df805728e4ae")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "1a553bc1-6261-4f5a-9eb8-68817c77af7e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "0f3441be-352c-4b72-99ac-d837e07d0ddd")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "902ee695-6bfc-4080-be3e-a5cace70e588")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "c4919839-3503-4eb4-968e-554eadeb6069")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "06af586b-cfe5-4eca-8bc7-248e6411fd5b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a69377e5-e631-482e-a849-7a6fce5e8d5b")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "679a8cd2-17ad-46fd-bab9-61356891e3f6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "e31cda2a-0346-4659-8196-dc1cc1bd5af6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "Fiducial*")
-		(path "/5f9e64aa-3d81-4b2b-bd1d-113459de8c53")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr smd exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.75 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "a0851adb-95ed-48e7-9cb8-ccce71b191c3")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1.5 0)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.Fab")
-			(uuid "38edd87e-bf69-4231-89b7-91b182984d8d")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "a55fd89a-f257-41f6-b0bb-c1c6716c381e")
-			(effects
-				(font
-					(size 0.4 0.4)
-					(thickness 0.06)
-				)
-			)
-		)
-		(pad "" smd circle
-			(at 0 0)
-			(size 1 1)
-			(layers "F.Cu" "F.Mask")
-			(solder_mask_margin 1)
-			(clearance 1)
-			(uuid "703bf79e-4af7-4eb3-a2b1-4e26740df102")
-		)
-		(embedded_fonts no)
-	)
-	(footprint "Fiducial:Fiducial_1mm_Mask3mm"
-		(layer "F.Cu")
-		(uuid "f254f4b9-641d-4e97-bd96-7560d262024e")
-		(at 115.5 125)
-		(descr "Circular Fiducial, 1mm bare copper, 3mm soldermask opening (recommended)")
-		(tags "fiducial")
-		(property "Reference" "FID2"
-			(at 0 -2.54 0)
-			(layer "F.SilkS")
-			(uuid "2f334899-b899-4840-9b83-ec679f05e969")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Value" "Fiducial"
-			(at 0 2.286 0)
-			(layer "F.Fab")
-			(uuid "3a1e1be0-2678-4c99-bf80-db6f50bef2b7")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Datasheet" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a1b8950a-540e-4aa4-9807-fa9d14049f6a")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Description" "Fiducial Marker"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "2beb7325-f970-407e-ba07-4976071c53ef")
-			(effects
-				(font
-					(size 1.27 1.27)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "ECS Art#" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d22ac928-3a69-4de1-9daf-cba7911c7beb")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "HAN" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "f94e3118-e758-4640-b178-06c04509ea85")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Voltage" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "87968740-5391-4f92-b6aa-b8876986b139")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Toleranz" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "5a1a98a1-da9e-4816-8a7e-5b206893b149")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Hersteller" "---"
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "831da04b-df89-4f1f-823d-8b8245e8a6db")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Field-1" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "d41dafe8-5d52-4382-95df-185b7bb89dc9")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Device" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "dee747fd-b1d3-4202-9c4a-801c22f9d32f")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property "Sim.Pins" ""
-			(at 0 0 0)
-			(unlocked yes)
-			(layer "F.Fab")
-			(hide yes)
-			(uuid "a8545a88-7baf-41cb-9aef-4d8364533584")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-		(property ki_fp_filters "Fiducial*")
-		(path "/6f1cf190-689f-4d03-b5dc-05a38d2acdbe")
-		(sheetname "/")
-		(sheetfile "smartSwitch.kicad_sch")
-		(attr smd exclude_from_bom)
-		(fp_circle
-			(center 0 0)
-			(end 1.75 0)
-			(stroke
-				(width 0.05)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.CrtYd")
-			(uuid "4ee50561-d99b-44d1-8ea5-7ec4fd56cd01")
-		)
-		(fp_circle
-			(center 0 0)
-			(end 1.5 0)
-			(stroke
-				(width 0.1)
-				(type solid)
-			)
-			(fill no)
-			(layer "F.Fab")
-			(uuid "054a2c55-50ed-456c-b224-0dfcd5b3241d")
-		)
-		(fp_text user "${REFERENCE}"
-			(at 0 0 0)
-			(layer "F.Fab")
-			(uuid "5bf23512-eae4-439a-99e1-ba8cc9132cbf")
-			(effects
-				(font
-					(size 0.4 0.4)
-					(thickness 0.06)
-				)
-			)
-		)
-		(pad "" smd circle
-			(at 0 0)
-			(size 1 1)
-			(layers "F.Cu" "F.Mask")
-			(solder_mask_margin 1)
-			(clearance 1)
-			(uuid "74c35bcf-c66a-4cb3-b9ea-c5ef2752dc13")
-		)
-		(embedded_fonts no)
-	)
-	(gr_line
-		(start 232 130)
-		(end 237 130)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "0fa37eb9-82ef-4303-8cb2-7654808e5da0")
-	)
-	(gr_arc
-		(start 239 168)
-		(mid 238.414214 169.414214)
-		(end 237 170)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "100031ec-35f3-485e-8663-1598f80aa324")
-	)
-	(gr_arc
-		(start 116 288)
-		(mid 115.414214 289.414214)
-		(end 114 290)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "2438d367-f5cf-46fb-b30b-5796f88ef37d")
-	)
-	(gr_arc
-		(start 114 130)
-		(mid 115.414214 130.585786)
-		(end 116 132)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "2b41154b-261c-4a6e-afee-139dba8f541b")
-	)
-	(gr_line
-		(start 237 170)
-		(end 232 170)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "2c2fffcd-50a2-49dc-98be-bb6f82954916")
-	)
-	(gr_arc
-		(start 116 168)
-		(mid 115.414214 169.414214)
-		(end 114 170)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "3461b7c0-00cd-45b8-998e-24c15fe55ef9")
-	)
-	(gr_line
-		(start 232 250)
-		(end 237 250)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "49eaf55a-096a-4d14-85c1-0bebe916f6ce")
-	)
-	(gr_line
-		(start 230 168)
-		(end 230 132)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "4a78af82-1ebb-4f33-b693-ebe55596893c")
-	)
-	(gr_arc
-		(start 107 132)
-		(mid 107.585786 130.585786)
-		(end 109 130)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "54ce4c6b-d00a-493b-8805-8d5be26478bc")
-	)
-	(gr_arc
-		(start 237 250)
-		(mid 238.414214 250.585786)
-		(end 239 252)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "56cce633-dcdc-4d00-ab72-1f35b01bfa11")
-	)
-	(gr_line
-		(start 107 288)
-		(end 107 252)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "5fbb3fb0-c270-4262-b9a1-8399a11a8a27")
-	)
-	(gr_line
-		(start 116 132)
-		(end 116 168)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "600a3631-f8c0-42a6-989b-9925586fb9cc")
-	)
-	(gr_line
-		(start 109 250)
-		(end 114 250)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "619a8f5b-fdd9-47a2-90b0-830d80038430")
-	)
-	(gr_arc
-		(start 237 130)
-		(mid 238.414214 130.585786)
-		(end 239 132)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "6251c4dc-94c7-458a-abfb-058622a3f4df")
-	)
-	(gr_rect
-		(start 100 120)
-		(end 246 300)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(fill no)
-		(layer "Edge.Cuts")
-		(uuid "6cff1f51-cd01-47e1-a2b7-98a2ee291ff2")
-	)
-	(gr_arc
-		(start 114 250)
-		(mid 115.414214 250.585786)
-		(end 116 252)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "6f4cfd1a-5777-4d7c-acf3-3b653a5b6cd7")
-	)
-	(gr_arc
-		(start 239 288)
-		(mid 238.414214 289.414214)
-		(end 237 290)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "6fb37e1c-09bf-447f-a021-222f4cd0a790")
-	)
-	(gr_line
-		(start 107 168)
-		(end 107 132)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "8511792e-9f6a-4292-a40b-e4f91c45f37d")
-	)
-	(gr_line
-		(start 114 290)
-		(end 109 290)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "8c998fd8-378a-481e-81fb-b12d0a1bcae8")
-	)
-	(gr_line
-		(start 109 130)
-		(end 114 130)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "8d88ecb1-4bc9-4303-90b3-10a5a3b618e5")
-	)
-	(gr_line
-		(start 237 290)
-		(end 232 290)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "945185e4-f3f1-4bb5-819a-b527390b65d4")
-	)
-	(gr_arc
-		(start 109 170)
-		(mid 107.585786 169.414214)
-		(end 107 168)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "9dadf85b-66e5-43eb-bfc3-5fd7168ebbbb")
-	)
-	(gr_arc
-		(start 232 170)
-		(mid 230.585786 169.414214)
-		(end 230 168)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "b3459237-a43a-4b7b-96fc-73ac7f31cd10")
-	)
-	(gr_arc
-		(start 109 290)
-		(mid 107.585786 289.414214)
-		(end 107 288)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "b8493d5d-e81d-4bc7-a924-4af2981193b6")
-	)
-	(gr_arc
-		(start 230 252)
-		(mid 230.585786 250.585786)
-		(end 232 250)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "c905720c-4364-4e8c-8f88-2a86fb023126")
-	)
-	(gr_line
-		(start 239 252)
-		(end 239 288)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "d07e315f-83dc-4a54-bf01-5352690723a5")
-	)
-	(gr_arc
-		(start 232 290)
-		(mid 230.585786 289.414214)
-		(end 230 288)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "d3c41331-53f0-407a-8031-a260c5fa86c6")
-	)
-	(gr_line
-		(start 239 132)
-		(end 239 168)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "e240fee1-7140-4fd6-ab03-47617814feee")
-	)
-	(gr_arc
-		(start 230 132)
-		(mid 230.585786 130.585786)
-		(end 232 130)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "e6a58662-a31f-467e-b40b-c7ab4239b022")
-	)
-	(gr_line
-		(start 116 252)
-		(end 116 288)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "e8f1036b-c74a-471e-ae2d-a2c0f4eb05aa")
-	)
-	(gr_line
-		(start 230 288)
-		(end 230 252)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "ea033540-f8a3-492f-bf74-f2cc2cf6a90b")
-	)
-	(gr_arc
-		(start 107 252)
-		(mid 107.585786 250.585786)
-		(end 109 250)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "ea541105-2274-4b6b-a50d-0eccd3236049")
-	)
-	(gr_line
-		(start 114 170)
-		(end 109 170)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(layer "Edge.Cuts")
-		(uuid "fe4fe82d-3eac-457c-9c0d-5d86f03214a3")
-	)
-	(gr_rect
-		(start 225 245)
-		(end 244 295)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(fill no)
-		(layer "F.CrtYd")
-		(uuid "3263bc68-6950-476f-968d-8baedcde5e5f")
-	)
-	(gr_rect
-		(start 225 125)
-		(end 244 175)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(fill no)
-		(layer "F.CrtYd")
-		(uuid "5e3acf6b-cd41-4843-9e7f-b675fe40acfa")
-	)
-	(gr_rect
-		(start 102 125)
-		(end 121 175)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(fill no)
-		(layer "F.CrtYd")
-		(uuid "63271691-5aad-4a18-9be0-218b27c7a8c8")
-	)
-	(gr_rect
-		(start 102 245)
-		(end 121 295)
-		(stroke
-			(width 0.05)
-			(type default)
-		)
-		(fill no)
-		(layer "F.CrtYd")
-		(uuid "ec4c5c54-c4db-46c2-a7a6-013987699c52")
-	)
-	(gr_line
-		(start 173 120)
-		(end 173 300)
-		(stroke
-			(width 0.1)
-			(type dash_dot)
-		)
-		(layer "User.2")
-		(uuid "13af49cf-d4ca-4d8f-a8d5-36a14d506e69")
-	)
-	(gr_line
-		(start 273 210)
-		(end 73 210)
-		(stroke
-			(width 0.1)
-			(type dash_dot)
-		)
-		(layer "User.2")
-		(uuid "73f93f8e-63ec-4b49-8aee-3e139315c46c")
-	)
-	(gr_line
-		(start 123 257.5)
-		(end 123.25 257.5)
-		(stroke
-			(width 0.1)
-			(type default)
-		)
-		(layer "User.3")
-		(uuid "73a2ad5e-b273-4787-8672-b8f579d2ebe5")
-	)
-	(gr_line
-		(start 123.25 150)
-		(end 123 150)
-		(stroke
-			(width 0.1)
-			(type default)
-		)
-		(layer "User.3")
-		(uuid "90eaadb6-fe2d-44d9-afa6-07f4a5d7d444")
-	)
-	(gr_text_box "Abstand AB1: 50mm\nAbstand Relais: 65mm \nAbstzand Shunt 60mm (17,65 SENSE Pins)\n"
-		(start 49.95 39.75)
-		(end 83.55 59.55)
-		(margins 0.8 0.8 0.8 0.8)
-		(layer "User.1")
-		(uuid "0d5e6914-d3e0-4c2c-ad80-ffa0bbad64f7")
-		(effects
-			(font
-				(size 1 1)
-				(thickness 0.1)
-			)
-			(justify left top)
-		)
-		(border yes)
-		(stroke
-			(width 0.1)
-			(type solid)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "01c236e6-8380-426b-9848-82161b5eef7e")
-		(pts
-			(xy 246 120) (xy 100 120)
-		)
-		(height 20)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "146,0000 mm"
-			(at 173 98.85 0)
-			(layer "User.2")
-			(uuid "01c236e6-8380-426b-9848-82161b5eef7e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "182b8976-150b-4078-a8fb-c54755abd034")
-		(pts
-			(xy 252 210) (xy 252 120)
-		)
-		(height 6)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "90,0000 mm"
-			(at 256.85 165 90)
-			(layer "User.2")
-			(uuid "182b8976-150b-4078-a8fb-c54755abd034")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "37312c86-25dc-4c64-9686-e422ec31cf2a")
-		(pts
-			(xy 246 120) (xy 173 120)
-		)
-		(height 17.5)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "73,0000 mm"
-			(at 209.5 101.35 0)
-			(layer "User.2")
-			(uuid "37312c86-25dc-4c64-9686-e422ec31cf2a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "4781d56c-8161-48c3-9307-4d586e2aa7f5")
-		(pts
-			(xy 254.5 120) (xy 254.5 300)
-		)
-		(height -8.5)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 2)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "180,0000 mm"
-			(at 265.639649 210.889649 90)
-			(layer "User.2")
-			(uuid "4781d56c-8161-48c3-9307-4d586e2aa7f5")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "7e9090fa-f897-41ce-9227-26fdb3110e99")
-		(pts
-			(xy 173 120) (xy 100 120)
-		)
-		(height 17.5)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "73,0000 mm"
-			(at 136.5 101.35 0)
-			(layer "User.2")
-			(uuid "7e9090fa-f897-41ce-9227-26fdb3110e99")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "c2038cc5-f606-4d91-b402-0de152e541ec")
-		(pts
-			(xy 173 120) (xy 204 120)
-		)
-		(height -4.75)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "31,0000 mm"
-			(at 188.5 114.1 0)
-			(layer "User.2")
-			(uuid "c2038cc5-f606-4d91-b402-0de152e541ec")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type aligned)
-		(layer "User.2")
-		(uuid "daa8074b-dd64-4b10-b130-3a162b75c503")
-		(pts
-			(xy 252 300) (xy 252 210)
-		)
-		(height 6)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "90,0000 mm"
-			(at 256.85 255 90)
-			(layer "User.2")
-			(uuid "daa8074b-dd64-4b10-b130-3a162b75c503")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "03ada09a-f167-43db-a2ab-6e788d205fd6")
-		(pts
-			(xy 114 132) (xy 100 120)
-		)
-		(height -19.5)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "14,0000 mm"
-			(at 107 111.35 0)
-			(layer "User.2")
-			(uuid "03ada09a-f167-43db-a2ab-6e788d205fd6")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "1198e10e-0f1b-44cc-a8e2-705d75ba0382")
-		(pts
-			(xy 109 288) (xy 100 300)
-		)
-		(height 17)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "9,0000 mm"
-			(at 104.5 303.85 0)
-			(layer "User.2")
-			(uuid "1198e10e-0f1b-44cc-a8e2-705d75ba0382")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "2ea86baf-f8d5-4ee7-be49-2199aafa3128")
-		(pts
-			(xy 114 132) (xy 114 168)
-		)
-		(height -18.5)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "36,0000 mm"
-			(at 94.35 150 90)
-			(layer "User.2")
-			(uuid "2ea86baf-f8d5-4ee7-be49-2199aafa3128")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "2f3ff9dc-10ea-4160-9313-d90c4b502abe")
-		(pts
-			(xy 232 132) (xy 246 132)
-		)
-		(height -22)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "14,0000 mm"
-			(at 239 108.85 0)
-			(layer "User.2")
-			(uuid "2f3ff9dc-10ea-4160-9313-d90c4b502abe")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "31f27f77-9114-488a-86ef-1181b059e010")
-		(pts
-			(xy 237 288) (xy 246 300)
-		)
-		(height 16)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "12,0000 mm"
-			(at 251.85 294 90)
-			(layer "User.2")
-			(uuid "31f27f77-9114-488a-86ef-1181b059e010")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "39296c2d-c2a1-45dc-8fe1-4e1da0125249")
-		(pts
-			(xy 114 288) (xy 114 252)
-		)
-		(height -18.5)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "36,0000 mm"
-			(at 94.35 270 90)
-			(layer "User.2")
-			(uuid "39296c2d-c2a1-45dc-8fe1-4e1da0125249")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "4ddfd0a2-5bd0-41c7-a6e1-7fc35b196fe3")
-		(pts
-			(xy 142 128.5) (xy 173 128)
-		)
-		(height -13.25)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "31,0000 mm"
-			(at 157.5 114.1 0)
-			(layer "User.2")
-			(uuid "4ddfd0a2-5bd0-41c7-a6e1-7fc35b196fe3")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "6a1d4f0c-15f0-4d45-8200-d60f7b45aec9")
-		(pts
-			(xy 109 288) (xy 109.25 300)
-		)
-		(height -13.5)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "12,0000 mm"
-			(at 94.35 294 90)
-			(layer "User.2")
-			(uuid "6a1d4f0c-15f0-4d45-8200-d60f7b45aec9")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "8a88a3d6-1266-470c-920e-84201aab4f68")
-		(pts
-			(xy 232 288) (xy 232 252)
-		)
-		(height 21)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "36,0000 mm"
-			(at 251.85 270 90)
-			(layer "User.2")
-			(uuid "8a88a3d6-1266-470c-920e-84201aab4f68")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "93bd038b-0664-4b4f-8709-6fef211f7f7e")
-		(pts
-			(xy 237 132) (xy 246 132.25)
-		)
-		(height -17)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "9,0000 mm"
-			(at 241.5 113.85 0)
-			(layer "User.2")
-			(uuid "93bd038b-0664-4b4f-8709-6fef211f7f7e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "a6c1742b-9f18-4ca3-ad2e-9356dcd3bf0a")
-		(pts
-			(xy 237 132) (xy 237 168)
-		)
-		(height 13.5)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "36,0000 mm"
-			(at 249.35 150 90)
-			(layer "User.2")
-			(uuid "a6c1742b-9f18-4ca3-ad2e-9356dcd3bf0a")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "c0c220a7-028c-4d2d-8c70-28d9b02c0e7d")
-		(pts
-			(xy 237 132) (xy 237.5 120)
-		)
-		(height 13.5)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "12,0000 mm"
-			(at 249.35 126 90)
-			(layer "User.2")
-			(uuid "c0c220a7-028c-4d2d-8c70-28d9b02c0e7d")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "c75b3947-17f8-4c00-af51-2fde72632e3e")
-		(pts
-			(xy 100 120) (xy 100 132)
-		)
-		(height -4.5)
-		(orientation 1)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "12,0000 mm"
-			(at 94.35 126 90)
-			(layer "User.2")
-			(uuid "c75b3947-17f8-4c00-af51-2fde72632e3e")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "cb13010e-3482-4b0d-aa88-8bf9fe2776cb")
-		(pts
-			(xy 232 288) (xy 246 300)
-		)
-		(height 19.5)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "14,0000 mm"
-			(at 239 306.35 0)
-			(layer "User.2")
-			(uuid "cb13010e-3482-4b0d-aa88-8bf9fe2776cb")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "d5c668e9-28fd-40c5-b367-ac4f6d6f3316")
-		(pts
-			(xy 109 132) (xy 100 120)
-		)
-		(height -14.5)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "9,0000 mm"
-			(at 104.5 116.35 0)
-			(layer "User.2")
-			(uuid "d5c668e9-28fd-40c5-b367-ac4f6d6f3316")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(dimension
-		(type orthogonal)
-		(layer "User.2")
-		(uuid "ff3d0011-6d4c-45f2-b7cb-98bf70387919")
-		(pts
-			(xy 114 288) (xy 100 300)
-		)
-		(height 22)
-		(orientation 0)
-		(format
-			(prefix "")
-			(suffix "")
-			(units 3)
-			(units_format 1)
-			(precision 4)
-		)
-		(style
-			(thickness 0.1)
-			(arrow_length 1.27)
-			(text_position_mode 0)
-			(arrow_direction outward)
-			(extension_height 0.58642)
-			(extension_offset 0.5)
-			(keep_text_aligned yes)
-		)
-		(gr_text "14,0000 mm"
-			(at 107 308.85 0)
-			(layer "User.2")
-			(uuid "ff3d0011-6d4c-45f2-b7cb-98bf70387919")
-			(effects
-				(font
-					(size 1 1)
-					(thickness 0.15)
-				)
-			)
-		)
-	)
-	(group ""
-		(uuid "1a193fff-6a53-4fbd-8fa3-5b8d2f02ebb4")
-		(members "49eaf55a-096a-4d14-85c1-0bebe916f6ce" "56cce633-dcdc-4d00-ab72-1f35b01bfa11"
-			"6fb37e1c-09bf-447f-a021-222f4cd0a790" "945185e4-f3f1-4bb5-819a-b527390b65d4"
-			"c905720c-4364-4e8c-8f88-2a86fb023126" "d07e315f-83dc-4a54-bf01-5352690723a5"
-			"d3c41331-53f0-407a-8031-a260c5fa86c6" "ea033540-f8a3-492f-bf74-f2cc2cf6a90b"
-		)
-	)
-	(group ""
-		(uuid "29264d2e-7bbe-4b56-9cd8-bdfb232daf11")
-		(members "2438d367-f5cf-46fb-b30b-5796f88ef37d" "5fbb3fb0-c270-4262-b9a1-8399a11a8a27"
-			"619a8f5b-fdd9-47a2-90b0-830d80038430" "6f4cfd1a-5777-4d7c-acf3-3b653a5b6cd7"
-			"8c998fd8-378a-481e-81fb-b12d0a1bcae8" "b8493d5d-e81d-4bc7-a924-4af2981193b6"
-			"e8f1036b-c74a-471e-ae2d-a2c0f4eb05aa" "ea541105-2274-4b6b-a50d-0eccd3236049"
-		)
-	)
-	(group ""
-		(uuid "4d9c1712-46c0-4529-8e5e-ba2e006cec25")
-		(members "2b41154b-261c-4a6e-afee-139dba8f541b" "3461b7c0-00cd-45b8-998e-24c15fe55ef9"
-			"54ce4c6b-d00a-493b-8805-8d5be26478bc" "600a3631-f8c0-42a6-989b-9925586fb9cc"
-			"8511792e-9f6a-4292-a40b-e4f91c45f37d" "8d88ecb1-4bc9-4303-90b3-10a5a3b618e5"
-			"9dadf85b-66e5-43eb-bfc3-5fd7168ebbbb" "fe4fe82d-3eac-457c-9c0d-5d86f03214a3"
-		)
-	)
-	(group ""
-		(uuid "f708e5b3-6fdf-4def-9900-c60938296a78")
-		(members "0fa37eb9-82ef-4303-8cb2-7654808e5da0" "100031ec-35f3-485e-8663-1598f80aa324"
-			"2c2fffcd-50a2-49dc-98be-bb6f82954916" "4a78af82-1ebb-4f33-b693-ebe55596893c"
-			"6251c4dc-94c7-458a-abfb-058622a3f4df" "b3459237-a43a-4b7b-96fc-73ac7f31cd10"
-			"e240fee1-7140-4fd6-ab03-47617814feee" "e6a58662-a31f-467e-b40b-c7ab4239b022"
-		)
-	)
-	(embedded_fonts no)
-)
Index: trunk/RedCubePressFitBoard/pressfit.kicad_pro
===================================================================
--- trunk/RedCubePressFitBoard/pressfit.kicad_pro	(revision 2)
+++ 	(revision )
@@ -1,786 +1,0 @@
-{
-  "board": {
-    "3dviewports": [],
-    "design_settings": {
-      "defaults": {
-        "apply_defaults_to_fp_fields": false,
-        "apply_defaults_to_fp_shapes": false,
-        "apply_defaults_to_fp_text": false,
-        "board_outline_line_width": 0.05,
-        "copper_line_width": 0.2,
-        "copper_text_italic": false,
-        "copper_text_size_h": 1.5,
-        "copper_text_size_v": 1.5,
-        "copper_text_thickness": 0.3,
-        "copper_text_upright": false,
-        "courtyard_line_width": 0.05,
-        "dimension_precision": 4,
-        "dimension_units": 3,
-        "dimensions": {
-          "arrow_length": 1270000,
-          "extension_offset": 500000,
-          "keep_text_aligned": true,
-          "suppress_zeroes": false,
-          "text_position": 0,
-          "units_format": 1
-        },
-        "fab_line_width": 0.1,
-        "fab_text_italic": false,
-        "fab_text_size_h": 1.0,
-        "fab_text_size_v": 1.0,
-        "fab_text_thickness": 0.15,
-        "fab_text_upright": false,
-        "other_line_width": 0.1,
-        "other_text_italic": false,
-        "other_text_size_h": 1.0,
-        "other_text_size_v": 1.0,
-        "other_text_thickness": 0.15,
-        "other_text_upright": false,
-        "pads": {
-          "drill": 1.0,
-          "height": 2.0,
-          "width": 2.0
-        },
-        "silk_line_width": 0.1,
-        "silk_text_italic": false,
-        "silk_text_size_h": 1.0,
-        "silk_text_size_v": 1.0,
-        "silk_text_thickness": 0.1,
-        "silk_text_upright": false,
-        "zones": {
-          "min_clearance": 0.5
-        }
-      },
-      "diff_pair_dimensions": [
-        {
-          "gap": 0.0,
-          "via_gap": 0.0,
-          "width": 0.0
-        }
-      ],
-      "drc_exclusions": [
-        [
-          "silk_edge_clearance|135500000|120000000|6cff1f51-cd01-47e1-a2b7-98a2ee291ff2|dc7e6c89-68b7-4922-916e-b710d6f7dcd6",
-          ""
-        ],
-        [
-          "silk_edge_clearance|148500000|120000000|6cff1f51-cd01-47e1-a2b7-98a2ee291ff2|42e05f38-57a7-42f3-8a78-f64702bb89e9",
-          ""
-        ],
-        [
-          "silk_edge_clearance|148500000|120000000|6cff1f51-cd01-47e1-a2b7-98a2ee291ff2|8a8403cb-9ae8-4d14-812d-a237ac73c3bf",
-          ""
-        ],
-        [
-          "silk_edge_clearance|197500000|120000000|6cff1f51-cd01-47e1-a2b7-98a2ee291ff2|9573e767-5828-4bac-843f-d3f9f6df2c5b",
-          ""
-        ],
-        [
-          "silk_edge_clearance|210500000|120000000|6cff1f51-cd01-47e1-a2b7-98a2ee291ff2|6057458f-fd09-48ef-a902-34df0d643a9a",
-          ""
-        ],
-        [
-          "silk_edge_clearance|210500000|120000000|6cff1f51-cd01-47e1-a2b7-98a2ee291ff2|7a38ccf9-8fbc-4911-bf4a-cd9bba1ec061",
-          ""
-        ]
-      ],
-      "meta": {
-        "version": 2
-      },
-      "rule_severities": {
-        "annular_width": "error",
-        "clearance": "error",
-        "connection_width": "warning",
-        "copper_edge_clearance": "error",
-        "copper_sliver": "warning",
-        "courtyards_overlap": "error",
-        "creepage": "error",
-        "diff_pair_gap_out_of_range": "error",
-        "diff_pair_uncoupled_length_too_long": "error",
-        "drill_out_of_range": "error",
-        "duplicate_footprints": "warning",
-        "extra_footprint": "warning",
-        "footprint": "error",
-        "footprint_filters_mismatch": "ignore",
-        "footprint_symbol_mismatch": "warning",
-        "footprint_type_mismatch": "ignore",
-        "hole_clearance": "error",
-        "hole_near_hole": "error",
-        "hole_to_hole": "error",
-        "holes_co_located": "warning",
-        "invalid_outline": "error",
-        "isolated_copper": "warning",
-        "item_on_disabled_layer": "error",
-        "items_not_allowed": "error",
-        "length_out_of_range": "error",
-        "lib_footprint_issues": "warning",
-        "lib_footprint_mismatch": "warning",
-        "malformed_courtyard": "error",
-        "microvia_drill_out_of_range": "error",
-        "mirrored_text_on_front_layer": "warning",
-        "missing_courtyard": "ignore",
-        "missing_footprint": "warning",
-        "net_conflict": "warning",
-        "nonmirrored_text_on_back_layer": "warning",
-        "npth_inside_courtyard": "ignore",
-        "padstack": "warning",
-        "pth_inside_courtyard": "ignore",
-        "shorting_items": "error",
-        "silk_edge_clearance": "warning",
-        "silk_over_copper": "warning",
-        "silk_overlap": "warning",
-        "skew_out_of_range": "error",
-        "solder_mask_bridge": "error",
-        "starved_thermal": "error",
-        "text_height": "warning",
-        "text_thickness": "warning",
-        "through_hole_pad_without_hole": "error",
-        "too_many_vias": "error",
-        "track_angle": "error",
-        "track_dangling": "warning",
-        "track_segment_length": "error",
-        "track_width": "error",
-        "tracks_crossing": "error",
-        "unconnected_items": "error",
-        "unresolved_variable": "error",
-        "via_dangling": "warning",
-        "zones_intersect": "error"
-      },
-      "rules": {
-        "max_error": 0.005,
-        "min_clearance": 0.2,
-        "min_connection": 0.2,
-        "min_copper_edge_clearance": 0.5,
-        "min_groove_width": 0.0,
-        "min_hole_clearance": 0.25,
-        "min_hole_to_hole": 0.25,
-        "min_microvia_diameter": 0.2,
-        "min_microvia_drill": 0.1,
-        "min_resolved_spokes": 2,
-        "min_silk_clearance": 0.0,
-        "min_text_height": 0.8,
-        "min_text_thickness": 0.08,
-        "min_through_hole_diameter": 0.3,
-        "min_track_width": 0.2,
-        "min_via_annular_width": 0.15,
-        "min_via_diameter": 0.5,
-        "solder_mask_to_copper_clearance": 0.005,
-        "use_height_for_length_calcs": true
-      },
-      "teardrop_options": [
-        {
-          "td_onpthpad": true,
-          "td_onroundshapesonly": false,
-          "td_onsmdpad": true,
-          "td_ontrackend": false,
-          "td_onvia": true
-        }
-      ],
-      "teardrop_parameters": [
-        {
-          "td_allow_use_two_tracks": true,
-          "td_curve_segcount": 0,
-          "td_height_ratio": 1.0,
-          "td_length_ratio": 0.5,
-          "td_maxheight": 2.0,
-          "td_maxlen": 1.0,
-          "td_on_pad_in_zone": false,
-          "td_target_name": "td_round_shape",
-          "td_width_to_size_filter_ratio": 0.9
-        },
-        {
-          "td_allow_use_two_tracks": true,
-          "td_curve_segcount": 0,
-          "td_height_ratio": 1.0,
-          "td_length_ratio": 0.5,
-          "td_maxheight": 2.0,
-          "td_maxlen": 1.0,
-          "td_on_pad_in_zone": false,
-          "td_target_name": "td_rect_shape",
-          "td_width_to_size_filter_ratio": 0.9
-        },
-        {
-          "td_allow_use_two_tracks": true,
-          "td_curve_segcount": 0,
-          "td_height_ratio": 1.0,
-          "td_length_ratio": 0.5,
-          "td_maxheight": 2.0,
-          "td_maxlen": 1.0,
-          "td_on_pad_in_zone": false,
-          "td_target_name": "td_track_end",
-          "td_width_to_size_filter_ratio": 0.9
-        }
-      ],
-      "track_widths": [
-        0.0,
-        0.25,
-        0.5,
-        1.0,
-        2.0,
-        3.0,
-        4.0
-      ],
-      "tuning_pattern_settings": {
-        "diff_pair_defaults": {
-          "corner_radius_percentage": 80,
-          "corner_style": 1,
-          "max_amplitude": 1.0,
-          "min_amplitude": 0.2,
-          "single_sided": false,
-          "spacing": 1.0
-        },
-        "diff_pair_skew_defaults": {
-          "corner_radius_percentage": 80,
-          "corner_style": 1,
-          "max_amplitude": 1.0,
-          "min_amplitude": 0.2,
-          "single_sided": false,
-          "spacing": 0.6
-        },
-        "single_track_defaults": {
-          "corner_radius_percentage": 80,
-          "corner_style": 1,
-          "max_amplitude": 1.0,
-          "min_amplitude": 0.2,
-          "single_sided": false,
-          "spacing": 0.6
-        }
-      },
-      "via_dimensions": [
-        {
-          "diameter": 0.0,
-          "drill": 0.0
-        },
-        {
-          "diameter": 0.7,
-          "drill": 0.3
-        },
-        {
-          "diameter": 0.8,
-          "drill": 0.3
-        }
-      ],
-      "zones_allow_external_fillets": false
-    },
-    "ipc2581": {
-      "dist": "",
-      "distpn": "",
-      "internal_id": "",
-      "mfg": "",
-      "mpn": ""
-    },
-    "layer_pairs": [],
-    "layer_presets": [],
-    "viewports": []
-  },
-  "boards": [],
-  "cvpcb": {
-    "equivalence_files": []
-  },
-  "erc": {
-    "erc_exclusions": [
-      [
-        "lib_symbol_issues|3302000|1270000|4fca5270-c273-44b6-b005-e5eaf86f363d|00000000-0000-0000-0000-000000000000|||",
-        ""
-      ],
-      [
-        "pin_to_pin|3251200|685800|303e122c-bd71-46b1-ba9e-d566b7b74552|0010c4ec-9ca4-401f-b31c-9d9d1f7ea765|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/495a9cc7-0a8f-4e5c-b2f2-b552a73e5326|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/495a9cc7-0a8f-4e5c-b2f2-b552a73e5326|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/495a9cc7-0a8f-4e5c-b2f2-b552a73e5326",
-        ""
-      ],
-      [
-        "pin_to_pin|3263900|685800|303e122c-bd71-46b1-ba9e-d566b7b74552|0010c4ec-9ca4-401f-b31c-9d9d1f7ea765|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/495a9cc7-0a8f-4e5c-b2f2-b552a73e5326|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/495a9cc7-0a8f-4e5c-b2f2-b552a73e5326|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/495a9cc7-0a8f-4e5c-b2f2-b552a73e5326",
-        ""
-      ],
-      [
-        "pin_to_pin|635000|1016000|7319b3a0-e470-4746-b009-b309cee55bd7|7319b3a0-e470-4746-b009-b309cee55bd7|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/108fac66-0a35-4a2b-bdbd-3dd4b8eaee87|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/108fac66-0a35-4a2b-bdbd-3dd4b8eaee87|/bf1f8167-8e29-49cc-a467-dd9cc2c77246/15739c62-38dc-437e-9b84-14f2967fa6be",
-        ""
-      ]
-    ],
-    "meta": {
-      "version": 0
-    },
-    "pin_map": [
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        2,
-        0,
-        1,
-        0,
-        0,
-        1,
-        0,
-        2,
-        2,
-        2,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        1,
-        0,
-        1,
-        0,
-        1,
-        2
-      ],
-      [
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        1,
-        1,
-        2,
-        1,
-        1,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        1,
-        1,
-        1,
-        1,
-        1,
-        0,
-        1,
-        1,
-        1,
-        1,
-        1,
-        2
-      ],
-      [
-        0,
-        0,
-        0,
-        1,
-        0,
-        0,
-        1,
-        0,
-        0,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        2,
-        1,
-        2,
-        0,
-        0,
-        1,
-        0,
-        2,
-        2,
-        2,
-        2
-      ],
-      [
-        0,
-        2,
-        0,
-        1,
-        0,
-        0,
-        1,
-        0,
-        2,
-        0,
-        0,
-        2
-      ],
-      [
-        0,
-        2,
-        1,
-        1,
-        0,
-        0,
-        1,
-        0,
-        2,
-        0,
-        0,
-        2
-      ],
-      [
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2,
-        2
-      ]
-    ],
-    "rule_severities": {
-      "bus_definition_conflict": "error",
-      "bus_entry_needed": "error",
-      "bus_to_bus_conflict": "error",
-      "bus_to_net_conflict": "error",
-      "conflicting_netclasses": "error",
-      "different_unit_footprint": "error",
-      "different_unit_net": "error",
-      "duplicate_reference": "error",
-      "duplicate_sheet_names": "error",
-      "endpoint_off_grid": "warning",
-      "extra_units": "error",
-      "footprint_filter": "ignore",
-      "footprint_link_issues": "warning",
-      "four_way_junction": "ignore",
-      "global_label_dangling": "warning",
-      "hier_label_mismatch": "error",
-      "label_dangling": "error",
-      "label_multiple_wires": "warning",
-      "lib_symbol_issues": "warning",
-      "lib_symbol_mismatch": "warning",
-      "missing_bidi_pin": "warning",
-      "missing_input_pin": "warning",
-      "missing_power_pin": "error",
-      "missing_unit": "warning",
-      "multiple_net_names": "warning",
-      "net_not_bus_member": "warning",
-      "no_connect_connected": "warning",
-      "no_connect_dangling": "warning",
-      "pin_not_connected": "error",
-      "pin_not_driven": "error",
-      "pin_to_pin": "warning",
-      "power_pin_not_driven": "error",
-      "same_local_global_label": "warning",
-      "similar_label_and_power": "warning",
-      "similar_labels": "warning",
-      "similar_power": "warning",
-      "simulation_model_issue": "ignore",
-      "single_global_label": "ignore",
-      "unannotated": "error",
-      "unconnected_wire_endpoint": "warning",
-      "unit_value_mismatch": "error",
-      "unresolved_variable": "error",
-      "wire_dangling": "error"
-    }
-  },
-  "libraries": {
-    "pinned_footprint_libs": [],
-    "pinned_symbol_libs": []
-  },
-  "meta": {
-    "filename": "pressfit.kicad_pro",
-    "version": 3
-  },
-  "net_settings": {
-    "classes": [
-      {
-        "bus_width": 12,
-        "clearance": 0.2,
-        "diff_pair_gap": 0.25,
-        "diff_pair_via_gap": 0.25,
-        "diff_pair_width": 0.2,
-        "line_style": 0,
-        "microvia_diameter": 0.3,
-        "microvia_drill": 0.1,
-        "name": "Default",
-        "pcb_color": "rgba(0, 0, 0, 0.000)",
-        "priority": 2147483647,
-        "schematic_color": "rgba(0, 0, 0, 0.000)",
-        "track_width": 0.2,
-        "via_diameter": 0.6,
-        "via_drill": 0.3,
-        "wire_width": 6
-      }
-    ],
-    "meta": {
-      "version": 4
-    },
-    "net_colors": null,
-    "netclass_assignments": null,
-    "netclass_patterns": []
-  },
-  "pcbnew": {
-    "last_paths": {
-      "gencad": "",
-      "idf": "",
-      "netlist": "",
-      "plot": "",
-      "pos_files": "",
-      "specctra_dsn": "",
-      "step": "pressfit.step",
-      "svg": "",
-      "vrml": ""
-    },
-    "page_layout_descr_file": ""
-  },
-  "schematic": {
-    "annotate_start_num": 0,
-    "bom_export_filename": "",
-    "bom_fmt_presets": [],
-    "bom_fmt_settings": {
-      "field_delimiter": ",",
-      "keep_line_breaks": false,
-      "keep_tabs": false,
-      "name": "CSV",
-      "ref_delimiter": ",",
-      "ref_range_delimiter": "",
-      "string_delimiter": "\""
-    },
-    "bom_presets": [],
-    "bom_settings": {
-      "exclude_dnp": false,
-      "fields_ordered": [
-        {
-          "group_by": false,
-          "label": "Reference",
-          "name": "Reference",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "ECS Art#",
-          "name": "ECS Art#",
-          "show": true
-        },
-        {
-          "group_by": true,
-          "label": "Value",
-          "name": "Value",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Hersteller",
-          "name": "Hersteller",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "HAN",
-          "name": "HAN",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Datasheet",
-          "name": "Datasheet",
-          "show": true
-        },
-        {
-          "group_by": true,
-          "label": "Footprint",
-          "name": "Footprint",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Qty",
-          "name": "${QUANTITY}",
-          "show": true
-        },
-        {
-          "group_by": true,
-          "label": "DNP",
-          "name": "${DNP}",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "#",
-          "name": "${ITEM_NUMBER}",
-          "show": false
-        },
-        {
-          "group_by": false,
-          "label": "Sim.Device",
-          "name": "Sim.Device",
-          "show": false
-        },
-        {
-          "group_by": false,
-          "label": "Sim.Pins",
-          "name": "Sim.Pins",
-          "show": false
-        },
-        {
-          "group_by": false,
-          "label": "Toleranz",
-          "name": "Toleranz",
-          "show": false
-        },
-        {
-          "group_by": false,
-          "label": "Voltage",
-          "name": "Voltage",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Beschreibung",
-          "name": "Description",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Field-1",
-          "name": "Field-1",
-          "show": false
-        }
-      ],
-      "filter_string": "",
-      "group_symbols": true,
-      "include_excluded_from_bom": false,
-      "name": "",
-      "sort_asc": true,
-      "sort_field": "Reference"
-    },
-    "connection_grid_size": 50.0,
-    "drawing": {
-      "dashed_lines_dash_length_ratio": 12.0,
-      "dashed_lines_gap_length_ratio": 3.0,
-      "default_line_thickness": 6.0,
-      "default_text_size": 50.0,
-      "field_names": [
-        {
-          "name": "ECS Art#",
-          "url": false,
-          "visible": false
-        },
-        {
-          "name": "HAN",
-          "url": false,
-          "visible": false
-        },
-        {
-          "name": "Voltage",
-          "url": false,
-          "visible": false
-        },
-        {
-          "name": "Toleranz",
-          "url": false,
-          "visible": false
-        },
-        {
-          "name": "Hersteller",
-          "url": false,
-          "visible": false
-        }
-      ],
-      "intersheets_ref_own_page": false,
-      "intersheets_ref_prefix": "",
-      "intersheets_ref_short": false,
-      "intersheets_ref_show": false,
-      "intersheets_ref_suffix": "",
-      "junction_size_choice": 3,
-      "label_size_ratio": 0.375,
-      "operating_point_overlay_i_precision": 3,
-      "operating_point_overlay_i_range": "~A",
-      "operating_point_overlay_v_precision": 3,
-      "operating_point_overlay_v_range": "~V",
-      "overbar_offset_ratio": 1.23,
-      "pin_symbol_size": 25.0,
-      "text_offset_ratio": 0.15
-    },
-    "legacy_lib_dir": "",
-    "legacy_lib_list": [],
-    "meta": {
-      "version": 1
-    },
-    "net_format_name": "",
-    "page_layout_descr_file": "",
-    "plot_directory": "",
-    "space_save_all_events": true,
-    "spice_current_sheet_as_root": false,
-    "spice_external_command": "spice \"%I\"",
-    "spice_model_current_sheet_as_root": true,
-    "spice_save_all_currents": false,
-    "spice_save_all_dissipations": false,
-    "spice_save_all_voltages": false,
-    "subpart_first_id": 65,
-    "subpart_id_separator": 0
-  },
-  "sheets": [
-    [
-      "bf1f8167-8e29-49cc-a467-dd9cc2c77246",
-      "Root"
-    ],
-    [
-      "495a9cc7-0a8f-4e5c-b2f2-b552a73e5326",
-      "ps"
-    ],
-    [
-      "108fac66-0a35-4a2b-bdbd-3dd4b8eaee87",
-      "chargeControl"
-    ],
-    [
-      "15739c62-38dc-437e-9b84-14f2967fa6be",
-      "dischargeControl"
-    ],
-    [
-      "f65c5738-75c6-4a59-809b-e04fe272e944",
-      "greenMeter"
-    ],
-    [
-      "81d06683-0ac5-4428-9aba-04cf8d65750e",
-      "switchControl"
-    ],
-    [
-      "4875905e-d35e-4049-a6aa-c7869d81fd32",
-      "bom-parts"
-    ]
-  ],
-  "text_variables": {}
-}