source: trunk/fw_g473rct/USBPD/usbpd_devices_conf.h

Last change on this file was 59, checked in by f.jahn, 5 weeks ago

Added more USBPD-stack files.
File size: 5.7 KB
RevLine 
[59]1/* USER CODE BEGIN Header */
2/**
3 ******************************************************************************
4 * @file usbpd_devices_conf.h
5 * @author MCD Application Team
6 * @brief This file contains the device define.
7 ******************************************************************************
8 * @attention
9 *
10 * Copyright (c) 2026 STMicroelectronics.
11 * All rights reserved.
12 *
13 * This software is licensed under terms that can be found in the LICENSE file
14 * in the root directory of this software component.
15 * If no LICENSE file comes with this software, it is provided AS-IS.
16 *
17 ******************************************************************************
18 */
19/* USER CODE END Header */
20
21/* CubeMX Generated */
22#define CUBEMX_GENERATED
23
24#ifndef USBPD_DEVICE_CONF_H
25#define USBPD_DEVICE_CONF_H
26
27#ifdef __cplusplus
28 extern "C" {
29#endif
30
31/* Includes ------------------------------------------------------------------*/
32#include "stm32g4xx_ll_bus.h"
33#include "stm32g4xx_ll_dma.h"
34#include "stm32g4xx_ll_gpio.h"
35#include "stm32g4xx_ll_rcc.h"
36#include "stm32g4xx_ll_ucpd.h"
37#include "stm32g4xx_ll_pwr.h"
38#include "stm32g4xx_ll_tim.h"
39#include "usbpd_pwr_user.h"
40#include "usbpd_pwr_if.h"
41
42/* USER CODE BEGIN Includes */
43
44/* USER CODE END Includes */
45
46/* Private typedef -----------------------------------------------------------*/
47/* Private function prototypes -----------------------------------------------*/
48/* Private functions ---------------------------------------------------------*/
49/* Private define ------------------------------------------------------------*/
50
51/* -----------------------------------------------------------------------------
52 usbpd_hw.c
53-------------------------------------------------------------------------------*/
54
55/* defined used to configure function : BSP_USBPD_GetUSPDInstance */
56#define UCPD_INSTANCE0 UCPD1
57
58/* defined used to configure function : BSP_USBPD_Init_DMARxInstance,BSP_USBPD_DeInit_DMARxInstance */
59#define UCPDDMA_INSTANCE0_CLOCKENABLE_RX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1)
60
61#define UCPDDMA_INSTANCE0_DMA_RX DMA1
62
63#define UCPDDMA_INSTANCE0_REQUEST_RX DMA_REQUEST_UCPD1_RX
64
65#define UCPDDMA_INSTANCE0_LL_CHANNEL_RX LL_DMA_CHANNEL_8
66
67#define UCPDDMA_INSTANCE0_CHANNEL_RX DMA1_Channel8
68
69/* defined used to configure function : BSP_USBPD_Init_DMATxInstance, BSP_USBPD_DeInit_DMATxInstance */
70#define UCPDDMA_INSTANCE0_CLOCKENABLE_TX LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1)
71
72#define UCPDDMA_INSTANCE0_DMA_TX DMA2
73
74#define UCPDDMA_INSTANCE0_REQUEST_TX DMA_REQUEST_UCPD1_TX
75
76#define UCPDDMA_INSTANCE0_LL_CHANNEL_TX LL_DMA_CHANNEL_1
77
78#define UCPDDMA_INSTANCE0_CHANNEL_TX DMA2_Channel1
79/* defined used to configure BSP_USBPD_SetFRSSignalling */
80#define UCPDFRS_INSTANCE0_FRSCC1
81#define UCPDFRS_INSTANCE0_FRSCC2
82
83#define UCPD_INSTANCE0_ENABLEIRQ do{ \
84 NVIC_SetPriority(UCPD1_IRQn,4); \
85 NVIC_EnableIRQ(UCPD1_IRQn); \
86 } while(0)
87
88/* -----------------------------------------------------------------------------
89 Definitions for timer service feature
90-------------------------------------------------------------------------------*/
91
92#define TIMX TIM1
93#define TIMX_CLK_ENABLE LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1)
94#define TIMX_CLK_DISABLE LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1)
95#define TIMX_CHANNEL_CH1 LL_TIM_CHANNEL_CH1
96#define TIMX_CHANNEL_CH2 LL_TIM_CHANNEL_CH2
97#define TIMX_CHANNEL_CH3 LL_TIM_CHANNEL_CH3
98#define TIMX_CHANNEL_CH4 LL_TIM_CHANNEL_CH4
99#define TIMX_CHANNEL1_SETEVENT do{ \
100 LL_TIM_OC_SetCompareCH1(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\
101 LL_TIM_ClearFlag_CC1(TIMX); \
102 }while(0)
103#define TIMX_CHANNEL2_SETEVENT do{ \
104 LL_TIM_OC_SetCompareCH2(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\
105 LL_TIM_ClearFlag_CC2(TIMX); \
106 }while(0)
107#define TIMX_CHANNEL3_SETEVENT do{ \
108 LL_TIM_OC_SetCompareCH3(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\
109 LL_TIM_ClearFlag_CC3(TIMX); \
110 }while(0)
111#define TIMX_CHANNEL4_SETEVENT do{ \
112 LL_TIM_OC_SetCompareCH4(TIMX, (TimeUs + TIMX->CNT) % TIM_MAX_TIME);\
113 LL_TIM_ClearFlag_CC4(TIMX); \
114 }while(0)
115#define TIMX_CHANNEL1_GETFLAG LL_TIM_IsActiveFlag_CC1
116#define TIMX_CHANNEL2_GETFLAG LL_TIM_IsActiveFlag_CC2
117#define TIMX_CHANNEL3_GETFLAG LL_TIM_IsActiveFlag_CC3
118#define TIMX_CHANNEL4_GETFLAG LL_TIM_IsActiveFlag_CC4
119
120#ifdef __cplusplus
121 }
122#endif
123
124#endif /* USBPD_DEVICE_CONF_H */
125
Note: See TracBrowser for help on using the repository browser.