Context Navigation

stm32g0xx_hal_cec.h

Last change on this file was 6, checked in by f.jahn, 8 months ago

File size: 35.3 KB

Line
1	/**
2	******************************************************************************
3	* @file stm32g0xx_hal_cec.h
4	* @author MCD Application Team
5	* @brief Header file of CEC HAL module.
6	******************************************************************************
7	* @attention
8	*
9	* <h2><center>© Copyright (c) 2018 STMicroelectronics.
10	* All rights reserved.</center></h2>
11	*
12	* This software component is licensed by ST under BSD 3-Clause license,
13	* the "License"; You may not use this file except in compliance with the
14	* License. You may obtain a copy of the License at:
15	* opensource.org/licenses/BSD-3-Clause
16	*
17	******************************************************************************
18	*/
19
20	/* Define to prevent recursive inclusion -------------------------------------*/
21	#ifndef STM32G0xx_HAL_CEC_H
22	#define STM32G0xx_HAL_CEC_H
23
24	#ifdef __cplusplus
25	extern "C" {
26	#endif
27
28	/* Includes ------------------------------------------------------------------*/
29	#include "stm32g0xx_hal_def.h"
30
31	#if defined (CEC)
32
33	/** @addtogroup STM32G0xx_HAL_Driver
34	* @{
35	*/
36
37	/** @addtogroup CEC
38	* @{
39	*/
40
41	/* Exported types ------------------------------------------------------------*/
42	/** @defgroup CEC_Exported_Types CEC Exported Types
43	* @{
44	*/
45
46	/**
47	* @brief CEC Init Structure definition
48	*/
49	typedef struct
50	{
51	uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
52	It can be one of @ref CEC_Signal_Free_Time
53	and belongs to the set {0,...,7} where
54	0x0 is the default configuration
55	else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
56
57	uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
58	it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
59	or CEC_EXTENDED_TOLERANCE */
60
61	uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
62	CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
63	CEC_RX_STOP_ON_BRE: reception is stopped. */
64
65	uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
66	CEC line upon Bit Rising Error detection.
67	CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
68	CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
69
70	uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
71	CEC line upon Long Bit Period Error detection.
72	CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
73	CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
74
75	uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
76	upon an error detected on a broadcast message.
77
78	It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
79
80	1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
81	a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
82	and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
83	b) LBPE detection: error-bit generation on the CEC line
84	if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
85
86	2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
87	no error-bit generation in case neither a) nor b) are satisfied. Additionally,
88	there is no error-bit generation in case of Short Bit Period Error detection in
89	a broadcast message while LSTN bit is set. */
90
91	uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
92	CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
93	CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
94
95	uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
96
97	CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
98	own address (OAR). Messages addressed to different destination are ignored.
99	Broadcast messages are always received.
100
101	CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
102	address (OAR) with positive acknowledge. Messages addressed to different destination
103	are received, but without interfering with the CEC bus: no acknowledge sent. */
104
105	uint16_t OwnAddress; /*!< Own addresses configuration
106	This parameter can be a value of @ref CEC_OWN_ADDRESS */
107
108	uint8_t RxBuffer; /!< CEC Rx buffer pointeur */
109
110
111	} CEC_InitTypeDef;
112
113	/**
114	* @brief HAL CEC State definition
115	* @note HAL CEC State value is a combination of 2 different substates: gState and RxState (see @ref CEC_State_Definition).
116	* - gState contains CEC state information related to global Handle management
117	* and also information related to Tx operations.
118	* gState value coding follow below described bitmap :
119	* b7 (not used)
120	* x : Should be set to 0
121	* b6 Error information
122	* 0 : No Error
123	* 1 : Error
124	* b5 CEC peripheral initilisation status
125	* 0 : Reset (peripheral not initialized)
126	* 1 : Init done (peripheral initialized. HAL CEC Init function already called)
127	* b4-b3 (not used)
128	* xx : Should be set to 00
129	* b2 Intrinsic process state
130	* 0 : Ready
131	* 1 : Busy (peripheral busy with some configuration or internal operations)
132	* b1 (not used)
133	* x : Should be set to 0
134	* b0 Tx state
135	* 0 : Ready (no Tx operation ongoing)
136	* 1 : Busy (Tx operation ongoing)
137	* - RxState contains information related to Rx operations.
138	* RxState value coding follow below described bitmap :
139	* b7-b6 (not used)
140	* xx : Should be set to 00
141	* b5 CEC peripheral initilisation status
142	* 0 : Reset (peripheral not initialized)
143	* 1 : Init done (peripheral initialized)
144	* b4-b2 (not used)
145	* xxx : Should be set to 000
146	* b1 Rx state
147	* 0 : Ready (no Rx operation ongoing)
148	* 1 : Busy (Rx operation ongoing)
149	* b0 (not used)
150	* x : Should be set to 0.
151	*/
152	typedef uint32_t HAL_CEC_StateTypeDef;
153
154	/**
155	* @brief CEC handle Structure definition
156	*/
157	#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
158	typedef struct __CEC_HandleTypeDef
159	#else
160	typedef struct
161	#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
162	{
163	CEC_TypeDef Instance; /!< CEC registers base address */
164
165	CEC_InitTypeDef Init; /!< CEC communication parameters /
166
167	uint8_t pTxBuffPtr; /!< Pointer to CEC Tx transfer Buffer */
168
169	uint16_t TxXferCount; /!< CEC Tx Transfer Counter /
170
171	uint16_t RxXferSize; /!< CEC Rx Transfer size, 0: header received only /
172
173	HAL_LockTypeDef Lock; /!< Locking object /
174
175	HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management
176	and also related to Tx operations.
177	This parameter can be a value of @ref HAL_CEC_StateTypeDef */
178
179	HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations.
180	This parameter can be a value of @ref HAL_CEC_StateTypeDef */
181
182	uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register
183	in case error is reported */
184
185	#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
186	void (* TxCpltCallback)(struct __CEC_HandleTypeDef
187	hcec); /!< CEC Tx Transfer completed callback */
188	void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec,
189	uint32_t RxFrameSize); /!< CEC Rx Transfer completed callback /
190	void (* ErrorCallback)(struct __CEC_HandleTypeDef hcec); /!< CEC error callback */
191
192	void (* MspInitCallback)(struct __CEC_HandleTypeDef hcec); /!< CEC Msp Init callback */
193	void (* MspDeInitCallback)(struct __CEC_HandleTypeDef hcec); /!< CEC Msp DeInit callback */
194
195	#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */
196	} CEC_HandleTypeDef;
197
198	#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
199	/**
200	* @brief HAL CEC Callback ID enumeration definition
201	*/
202	typedef enum
203	{
204	HAL_CEC_TX_CPLT_CB_ID = 0x00U, /!< CEC Tx Transfer completed callback ID /
205	HAL_CEC_RX_CPLT_CB_ID = 0x01U, /!< CEC Rx Transfer completed callback ID /
206	HAL_CEC_ERROR_CB_ID = 0x02U, /!< CEC error callback ID /
207	HAL_CEC_MSPINIT_CB_ID = 0x03U, /!< CEC Msp Init callback ID /
208	HAL_CEC_MSPDEINIT_CB_ID = 0x04U /!< CEC Msp DeInit callback ID /
209	} HAL_CEC_CallbackIDTypeDef;
210
211	/**
212	* @brief HAL CEC Callback pointer definition
213	*/
214	typedef void (pCEC_CallbackTypeDef)(CEC_HandleTypeDef hcec); /!< pointer to an CEC callback function /
215	typedef void (pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef hcec,
216	uint32_t RxFrameSize); /!< pointer to an Rx Transfer completed callback function /
217	#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
218	/**
219	* @}
220	*/
221
222	/* Exported constants --------------------------------------------------------*/
223	/** @defgroup CEC_Exported_Constants CEC Exported Constants
224	* @{
225	*/
226	/** @defgroup CEC_State_Definition CEC State Code Definition
227	* @{
228	*/
229	#define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized
230	Value is allowed for gState and RxState */
231	#define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use
232	Value is allowed for gState and RxState */
233	#define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing
234	Value is allowed for gState only */
235	#define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing
236	Value is allowed for RxState only */
237	#define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing
238	Value is allowed for gState only */
239	#define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing
240	Value is allowed for gState only */
241	#define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /!< Error Value is allowed for gState only /
242	/**
243	* @}
244	*/
245	/** @defgroup CEC_Error_Code CEC Error Code
246	* @{
247	*/
248	#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /!< no error /
249	#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /!< CEC Rx-Overrun /
250	#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /!< CEC Rx Bit Rising Error /
251	#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /!< CEC Rx Short Bit period Error /
252	#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /!< CEC Rx Long Bit period Error /
253	#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /!< CEC Rx Missing Acknowledge /
254	#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /!< CEC Arbitration Lost /
255	#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /!< CEC Tx-Buffer Underrun /
256	#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /!< CEC Tx-Error /
257	#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /!< CEC Tx Missing Acknowledge /
258	#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
259	#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /!< Invalid Callback Error /
260	#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
261	/**
262	* @}
263	*/
264
265	/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter
266	* @{
267	*/
268	#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U)
269	#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U)
270	#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U)
271	#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U)
272	#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U)
273	#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U)
274	#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U)
275	#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U)
276	/**
277	* @}
278	*/
279
280	/** @defgroup CEC_Tolerance CEC Receiver Tolerance
281	* @{
282	*/
283	#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U)
284	#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
285	/**
286	* @}
287	*/
288
289	/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
290	* @{
291	*/
292	#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U)
293	#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
294	/**
295	* @}
296	*/
297
298	/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported
299	* @{
300	*/
301	#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U)
302	#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
303	/**
304	* @}
305	*/
306
307	/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported
308	* @{
309	*/
310	#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U)
311	#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
312	/**
313	* @}
314	*/
315
316	/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message
317	* @{
318	*/
319	#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U)
320	#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
321	/**
322	* @}
323	*/
324
325	/** @defgroup CEC_SFT_Option CEC Signal Free Time start option
326	* @{
327	*/
328	#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U)
329	#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
330	/**
331	* @}
332	*/
333
334	/** @defgroup CEC_Listening_Mode CEC Listening mode option
335	* @{
336	*/
337	#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U)
338	#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
339	/**
340	* @}
341	*/
342
343	/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register
344	* @{
345	*/
346	#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U)
347	/**
348	* @}
349	*/
350
351	/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
352	* @{
353	*/
354	#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U)
355	/**
356	* @}
357	*/
358
359	/** @defgroup CEC_OWN_ADDRESS CEC Own Address
360	* @{
361	*/
362	#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */
363	#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */
364	#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */
365	#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */
366	#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */
367	#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */
368	#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */
369	#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */
370	#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */
371	#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */
372	#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */
373	#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */
374	#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */
375	#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */
376	#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */
377	#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */
378	/**
379	* @}
380	*/
381
382	/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition
383	* @{
384	*/
385	#define CEC_IT_TXACKE CEC_IER_TXACKEIE
386	#define CEC_IT_TXERR CEC_IER_TXERRIE
387	#define CEC_IT_TXUDR CEC_IER_TXUDRIE
388	#define CEC_IT_TXEND CEC_IER_TXENDIE
389	#define CEC_IT_TXBR CEC_IER_TXBRIE
390	#define CEC_IT_ARBLST CEC_IER_ARBLSTIE
391	#define CEC_IT_RXACKE CEC_IER_RXACKEIE
392	#define CEC_IT_LBPE CEC_IER_LBPEIE
393	#define CEC_IT_SBPE CEC_IER_SBPEIE
394	#define CEC_IT_BRE CEC_IER_BREIE
395	#define CEC_IT_RXOVR CEC_IER_RXOVRIE
396	#define CEC_IT_RXEND CEC_IER_RXENDIE
397	#define CEC_IT_RXBR CEC_IER_RXBRIE
398	/**
399	* @}
400	*/
401
402	/** @defgroup CEC_Flags_Definitions CEC Flags definition
403	* @{
404	*/
405	#define CEC_FLAG_TXACKE CEC_ISR_TXACKE
406	#define CEC_FLAG_TXERR CEC_ISR_TXERR
407	#define CEC_FLAG_TXUDR CEC_ISR_TXUDR
408	#define CEC_FLAG_TXEND CEC_ISR_TXEND
409	#define CEC_FLAG_TXBR CEC_ISR_TXBR
410	#define CEC_FLAG_ARBLST CEC_ISR_ARBLST
411	#define CEC_FLAG_RXACKE CEC_ISR_RXACKE
412	#define CEC_FLAG_LBPE CEC_ISR_LBPE
413	#define CEC_FLAG_SBPE CEC_ISR_SBPE
414	#define CEC_FLAG_BRE CEC_ISR_BRE
415	#define CEC_FLAG_RXOVR CEC_ISR_RXOVR
416	#define CEC_FLAG_RXEND CEC_ISR_RXEND
417	#define CEC_FLAG_RXBR CEC_ISR_RXBR
418	/**
419	* @}
420	*/
421
422	/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
423	* @{
424	*/
425	#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR\|CEC_ISR_BRE\|CEC_ISR_SBPE\|CEC_ISR_LBPE\|CEC_ISR_RXACKE\|\
426	CEC_ISR_ARBLST\|CEC_ISR_TXUDR\|CEC_ISR_TXERR\|CEC_ISR_TXACKE)
427	/**
428	* @}
429	*/
430
431	/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
432	* @{
433	*/
434	#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE\|CEC_IER_LBPEIE\|CEC_IER_SBPEIE\|CEC_IER_BREIE\|CEC_IER_RXOVRIE)
435	/**
436	* @}
437	*/
438
439	/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
440	* @{
441	*/
442	#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE\|CEC_IER_TXERRIE\|CEC_IER_TXUDRIE\|CEC_IER_ARBLSTIE)
443	/**
444	* @}
445	*/
446
447	/**
448	* @}
449	*/
450
451	/* Exported macros -----------------------------------------------------------*/
452	/** @defgroup CEC_Exported_Macros CEC Exported Macros
453	* @{
454	*/
455
456	/** @brief Reset CEC handle gstate & RxState
457	* @param __HANDLE__ CEC handle.
458	* @retval None
459	*/
460	#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
461	#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
462	(__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
463	(__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
464	(__HANDLE__)->MspInitCallback = NULL; \
465	(__HANDLE__)->MspDeInitCallback = NULL; \
466	} while(0)
467	#else
468	#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
469	(__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
470	(__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
471	} while(0)
472	#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
473	/** @brief Checks whether or not the specified CEC interrupt flag is set.
474	* @param __HANDLE__ specifies the CEC Handle.
475	* @param __FLAG__ specifies the flag to check.
476	* @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
477	* @arg CEC_FLAG_TXERR: Tx Error.
478	* @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
479	* @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
480	* @arg CEC_FLAG_TXBR: Tx-Byte Request.
481	* @arg CEC_FLAG_ARBLST: Arbitration Lost
482	* @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
483	* @arg CEC_FLAG_LBPE: Rx Long period Error
484	* @arg CEC_FLAG_SBPE: Rx Short period Error
485	* @arg CEC_FLAG_BRE: Rx Bit Rising Error
486	* @arg CEC_FLAG_RXOVR: Rx Overrun.
487	* @arg CEC_FLAG_RXEND: End Of Reception.
488	* @arg CEC_FLAG_RXBR: Rx-Byte Received.
489	* @retval ITStatus
490	*/
491	#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
492
493	/** @brief Clears the interrupt or status flag when raised (write at 1)
494	* @param __HANDLE__ specifies the CEC Handle.
495	* @param __FLAG__ specifies the interrupt/status flag to clear.
496	* This parameter can be one of the following values:
497	* @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
498	* @arg CEC_FLAG_TXERR: Tx Error.
499	* @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
500	* @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
501	* @arg CEC_FLAG_TXBR: Tx-Byte Request.
502	* @arg CEC_FLAG_ARBLST: Arbitration Lost
503	* @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
504	* @arg CEC_FLAG_LBPE: Rx Long period Error
505	* @arg CEC_FLAG_SBPE: Rx Short period Error
506	* @arg CEC_FLAG_BRE: Rx Bit Rising Error
507	* @arg CEC_FLAG_RXOVR: Rx Overrun.
508	* @arg CEC_FLAG_RXEND: End Of Reception.
509	* @arg CEC_FLAG_RXBR: Rx-Byte Received.
510	* @retval none
511	*/
512	#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR \|= (__FLAG__))
513
514	/** @brief Enables the specified CEC interrupt.
515	* @param __HANDLE__ specifies the CEC Handle.
516	* @param __INTERRUPT__ specifies the CEC interrupt to enable.
517	* This parameter can be one of the following values:
518	* @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
519	* @arg CEC_IT_TXERR: Tx Error IT Enable
520	* @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
521	* @arg CEC_IT_TXEND: End of transmission IT Enable
522	* @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
523	* @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
524	* @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
525	* @arg CEC_IT_LBPE: Rx Long period Error IT Enable
526	* @arg CEC_IT_SBPE: Rx Short period Error IT Enable
527	* @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
528	* @arg CEC_IT_RXOVR: Rx Overrun IT Enable
529	* @arg CEC_IT_RXEND: End Of Reception IT Enable
530	* @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
531	* @retval none
532	*/
533	#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER \|= (__INTERRUPT__))
534
535	/** @brief Disables the specified CEC interrupt.
536	* @param __HANDLE__ specifies the CEC Handle.
537	* @param __INTERRUPT__ specifies the CEC interrupt to disable.
538	* This parameter can be one of the following values:
539	* @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
540	* @arg CEC_IT_TXERR: Tx Error IT Enable
541	* @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
542	* @arg CEC_IT_TXEND: End of transmission IT Enable
543	* @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
544	* @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
545	* @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
546	* @arg CEC_IT_LBPE: Rx Long period Error IT Enable
547	* @arg CEC_IT_SBPE: Rx Short period Error IT Enable
548	* @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
549	* @arg CEC_IT_RXOVR: Rx Overrun IT Enable
550	* @arg CEC_IT_RXEND: End Of Reception IT Enable
551	* @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
552	* @retval none
553	*/
554	#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
555
556	/** @brief Checks whether or not the specified CEC interrupt is enabled.
557	* @param __HANDLE__ specifies the CEC Handle.
558	* @param __INTERRUPT__ specifies the CEC interrupt to check.
559	* This parameter can be one of the following values:
560	* @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
561	* @arg CEC_IT_TXERR: Tx Error IT Enable
562	* @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
563	* @arg CEC_IT_TXEND: End of transmission IT Enable
564	* @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
565	* @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
566	* @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
567	* @arg CEC_IT_LBPE: Rx Long period Error IT Enable
568	* @arg CEC_IT_SBPE: Rx Short period Error IT Enable
569	* @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
570	* @arg CEC_IT_RXOVR: Rx Overrun IT Enable
571	* @arg CEC_IT_RXEND: End Of Reception IT Enable
572	* @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
573	* @retval FlagStatus
574	*/
575	#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
576
577	/** @brief Enables the CEC device
578	* @param __HANDLE__ specifies the CEC Handle.
579	* @retval none
580	*/
581	#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= CEC_CR_CECEN)
582
583	/** @brief Disables the CEC device
584	* @param __HANDLE__ specifies the CEC Handle.
585	* @retval none
586	*/
587	#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
588
589	/** @brief Set Transmission Start flag
590	* @param __HANDLE__ specifies the CEC Handle.
591	* @retval none
592	*/
593	#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR \|= CEC_CR_TXSOM)
594
595	/** @brief Set Transmission End flag
596	* @param __HANDLE__ specifies the CEC Handle.
597	* @retval none
598	* If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
599	*/
600	#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR \|= CEC_CR_TXEOM)
601
602	/** @brief Get Transmission Start flag
603	* @param __HANDLE__ specifies the CEC Handle.
604	* @retval FlagStatus
605	*/
606	#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
607
608	/** @brief Get Transmission End flag
609	* @param __HANDLE__ specifies the CEC Handle.
610	* @retval FlagStatus
611	*/
612	#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
613
614	/** @brief Clear OAR register
615	* @param __HANDLE__ specifies the CEC Handle.
616	* @retval none
617	*/
618	#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
619
620	/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
621	* To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
622	* @param __HANDLE__ specifies the CEC Handle.
623	* @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position)
624	* @retval none
625	*/
626	#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
627
628	/**
629	* @}
630	*/
631
632	/* Exported functions --------------------------------------------------------*/
633	/** @addtogroup CEC_Exported_Functions
634	* @{
635	*/
636
637	/** @addtogroup CEC_Exported_Functions_Group1
638	* @{
639	*/
640	/* Initialization and de-initialization functions ****************************/
641	HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
642	HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
643	HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
644	void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
645	void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
646
647	#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
648	HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID,
649	pCEC_CallbackTypeDef pCallback);
650	HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);
651
652	HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
653	HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
654	#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
655	/**
656	* @}
657	*/
658
659	/** @addtogroup CEC_Exported_Functions_Group2
660	* @{
661	*/
662	/* I/O operation functions ***************************************************/
663	HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress,
664	uint8_t *pData, uint32_t Size);
665	uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
666	void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef hcec, uint8_t Rxbuffer);
667	void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
668	void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
669	void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
670	void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
671	/**
672	* @}
673	*/
674
675	/** @addtogroup CEC_Exported_Functions_Group3
676	* @{
677	*/
678	/* Peripheral State functions ************************************************/
679	HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
680	uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
681	/**
682	* @}
683	*/
684
685	/**
686	* @}
687	*/
688
689	/* Private types -------------------------------------------------------------*/
690	/** @defgroup CEC_Private_Types CEC Private Types
691	* @{
692	*/
693
694	/**
695	* @}
696	*/
697
698	/* Private variables ---------------------------------------------------------*/
699	/** @defgroup CEC_Private_Variables CEC Private Variables
700	* @{
701	*/
702
703	/**
704	* @}
705	*/
706
707	/* Private constants ---------------------------------------------------------*/
708	/** @defgroup CEC_Private_Constants CEC Private Constants
709	* @{
710	*/
711
712	/**
713	* @}
714	*/
715
716	/* Private macros ------------------------------------------------------------*/
717	/** @defgroup CEC_Private_Macros CEC Private Macros
718	* @{
719	*/
720
721	#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT)
722
723	#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) \|\| \
724	((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
725
726	#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) \|\| \
727	((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
728
729	#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) \|\| \
730	((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
731
732	#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) \|\| \
733	((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
734
735	#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) \|\| \
736	((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
737
738	#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) \|\| \
739	((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
740
741	#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) \|\| \
742	((__MODE__) == CEC_FULL_LISTENING_MODE))
743
744	/** @brief Check CEC message size.
745	* The message size is the payload size: without counting the header,
746	* it varies from 0 byte (ping operation, one header only, no payload) to
747	* 15 bytes (1 opcode and up to 14 operands following the header).
748	* @param __SIZE__ CEC message size.
749	* @retval Test result (TRUE or FALSE).
750	*/
751	#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)
752
753	/** @brief Check CEC device Own Address Register (OAR) setting.
754	* OAR address is written in a 15-bit field within CEC_CFGR register.
755	* @param __ADDRESS__ CEC own address.
756	* @retval Test result (TRUE or FALSE).
757	*/
758	#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU)
759
760	/** @brief Check CEC initiator or destination logical address setting.
761	* Initiator and destination addresses are coded over 4 bits.
762	* @param __ADDRESS__ CEC initiator or logical address.
763	* @retval Test result (TRUE or FALSE).
764	*/
765	#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU)
766	/**
767	* @}
768	*/
769	/* Private functions ---------------------------------------------------------*/
770	/** @defgroup CEC_Private_Functions CEC Private Functions
771	* @{
772	*/
773
774	/**
775	* @}
776	*/
777
778	/**
779	* @}
780	*/
781
782	/**
783	* @}
784	*/
785
786	#endif /* CEC */
787
788	#ifdef __cplusplus
789	}
790	#endif
791
792	#endif /* STM32G0xxHAL_CEC_H */
793
794	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: trunk/firmware/Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cec.h

Download in other formats: