Index: trunk/firmware_v2/SES/PowerPro.emProject
===================================================================
--- trunk/firmware_v2/SES/PowerPro.emProject	(revision 24)
+++ trunk/firmware_v2/SES/PowerPro.emProject	(revision 28)
@@ -2,15 +2,19 @@
 <solution Name="PowerPro" target="8" version="2">
   <configuration
-    Name="Debug"
+    Name="Debug_12V"
     c_preprocessor_definitions="DEBUG"
     gcc_debugging_level="Level 3"
     gcc_omit_frame_pointer="Yes"
     gcc_optimization_level="None" />
+  <configuration Name="Debug_24V" />
+  <configuration Name="Debug_48V" />
   <configuration
-    Name="Release"
+    Name="Release_12V"
     c_preprocessor_definitions="NDEBUG"
     gcc_debugging_level="Level 2"
     gcc_omit_frame_pointer="Yes"
     gcc_optimization_level="Level 2 balanced" />
+  <configuration Name="Release_24V" />
+  <configuration Name="Release_48V" />
   <project Name="PowerPro">
     <configuration
@@ -48,15 +52,28 @@
       target_reset_script="Reset();" />
     <configuration
-      Name="Debug"
-      arm_library_optimization="Small"
-      gcc_optimization_level="None"
+      Name="Debug_12V"
+      c_preprocessor_definitions="SYSTEM_VOLTAGE_12V"
       linker_keep_symbols="_vectors" />
     <configuration
-      Name="Release"
-      arm_library_optimization="Balanced"
-      gcc_optimization_level="Level 2 for size" />
+      Name="Debug_24V"
+      c_preprocessor_definitions="SYSTEM_VOLTAGE_24V" />
+    <configuration
+      Name="Debug_48V"
+      c_preprocessor_definitions="SYSTEM_VOLTAGE_48V" />
+    <configuration
+      Name="Release_12V"
+      c_preprocessor_definitions="SYSTEM_VOLTAGE_12V"
+      gcc_optimization_level="Level 2 balanced" />
+    <configuration
+      Name="Release_24V"
+      c_preprocessor_definitions="SYSTEM_VOLTAGE_24V"
+      gcc_optimization_level="Level 2 balanced" />
+    <configuration
+      Name="Release_48V"
+      c_preprocessor_definitions="SYSTEM_VOLTAGE_48V"
+      gcc_optimization_level="Level 2 balanced" />
     <folder Name="CMSIS Files original_from_segger_ersetzt_durch_ST_file_from_cube">
       <file file_name="STM32C0xx/Device/Include/stm32c0xx.h">
-        <configuration Name="Debug" build_exclude_from_build="Yes" />
+        <configuration Name="Debug_12V" build_exclude_from_build="Yes" />
       </file>
       <file file_name="STM32C0xx/Device/Source/system_stm32c0xx.c">
@@ -92,4 +109,5 @@
     <folder Name="CUBE HAL Driver">
       <folder Name="inc">
+        <file file_name="../Core/Inc/iwdg.h" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal.h" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_adc.h" />
@@ -104,4 +122,5 @@
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio.h" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_gpio_ex.h" />
+        <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_iwdg.h" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr.h" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Inc/stm32c0xx_hal_pwr_ex.h" />
@@ -127,4 +146,5 @@
       </folder>
       <folder Name="src">
+        <file file_name="../Core/Src/iwdg.c" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal.c" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_adc.c" />
@@ -137,4 +157,5 @@
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_flash_ex.c" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_gpio.c" />
+        <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_iwdg.c" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr.c" />
         <file file_name="../Drivers/STM32C0xx_HAL_Driver/Src/stm32c0xx_hal_pwr_ex.c" />
@@ -178,5 +199,5 @@
       <file file_name="src/mode_lvp.c" />
       <file file_name="src/mode_lvp_ovp.c">
-        <configuration Name="Debug" build_exclude_from_build="No" />
+        <configuration Name="Debug_12V" build_exclude_from_build="No" />
       </file>
       <file file_name="src/mode_mainswitch.c" />