Context Navigation

heater280_304.cam

Last change on this file was 20, checked in by a.rahimi, 3 years ago

File size: 11.9 KB

Rev	Line
[20]	1	{
	2	"author": {
	3	"email": "support.eagle@autodesk.com",
	4	"name": "Autodesk EAGLE"
	5	},
	6	"description": {
	7	"EN": "EAGLE default 4 layer CAM job."
	8	},
	9	"output_type": "zip",
	10	"outputs": [
	11	{
	12	"filename_prefix": "CAMOutputs/GerberFiles",
	13	"format_specifier": {
	14	"decimal": 4,
	15	"integer": 3
	16	},
	17	"generate_job_file": true,
	18	"output_type": "gerber",
	19	"outputs": [
	20	{
	21	"advanced_options": {
	22	"mirror": false,
	23	"offset_x": 0,
	24	"offset_y": 0,
	25	"rotate": false,
	26	"upside_down": false
	27	},
	28	"board_outline": false,
	29	"config": {
	30	"file_function": "Copper",
	31	"layer": 1,
	32	"layer_details": "mixed",
	33	"layer_type": "top"
	34	},
	35	"filename_format": "%PREFIX/copper_top_l1.gbr",
	36	"layers": [
	37	1,
	38	17,
	39	18
	40	],
	41	"name": "Top Copper",
	42	"polarity": "positive",
	43	"type": "gerber_layer"
	44	},
	45	{
	46	"advanced_options": {
	47	"mirror": false,
	48	"offset_x": 0,
	49	"offset_y": 0,
	50	"rotate": false,
	51	"upside_down": false
	52	},
	53	"board_outline": false,
	54	"config": {
	55	"file_function": "Copper",
	56	"layer": 2,
	57	"layer_details": "mixed",
	58	"layer_type": "Inner"
	59	},
	60	"filename_format": "%PREFIX/copper_inner_l2.gbr",
	61	"layers": [
	62	2,
	63	17,
	64	18
	65	],
	66	"name": "Copper Layer 2",
	67	"polarity": "positive",
	68	"type": "gerber_layer"
	69	},
	70	{
	71	"advanced_options": {
	72	"mirror": false,
	73	"offset_x": 0,
	74	"offset_y": 0,
	75	"rotate": false,
	76	"upside_down": false
	77	},
	78	"board_outline": false,
	79	"config": {
	80	"file_function": "Copper",
	81	"layer": 3,
	82	"layer_details": "mixed",
	83	"layer_type": "Inner"
	84	},
	85	"filename_format": "%PREFIX/copper_inner_l3.gbr",
	86	"layers": [
	87	15,
	88	17,
	89	18
	90	],
	91	"name": "Copper Layer 15",
	92	"polarity": "positive",
	93	"type": "gerber_layer"
	94	},
	95	{
	96	"advanced_options": {
	97	"mirror": false,
	98	"offset_x": 0,
	99	"offset_y": 0,
	100	"rotate": false,
	101	"upside_down": false
	102	},
	103	"board_outline": false,
	104	"config": {
	105	"file_function": "Copper",
	106	"layer": 4,
	107	"layer_details": "mixed",
	108	"layer_type": "bottom"
	109	},
	110	"filename_format": "%PREFIX/copper_bottom_l4.gbr",
	111	"layers": [
	112	16,
	113	17,
	114	18
	115	],
	116	"name": "Bottom Copper",
	117	"polarity": "positive",
	118	"type": "gerber_layer"
	119	},
	120	{
	121	"advanced_options": {
	122	"mirror": false,
	123	"offset_x": 0,
	124	"offset_y": 0,
	125	"rotate": false,
	126	"upside_down": false
	127	},
	128	"board_outline": true,
	129	"config": {
	130	"file_function": "Profile",
	131	"plating": "non-plated"
	132	},
	133	"filename_format": "%PREFIX/profile.gbr",
	134	"layers": [
	135	],
	136	"milling": true,
	137	"polarity": "positive",
	138	"type": "gerber_layer"
	139	},
	140	{
	141	"advanced_options": {
	142	"mirror": false,
	143	"offset_x": 0,
	144	"offset_y": 0,
	145	"rotate": false,
	146	"upside_down": false
	147	},
	148	"board_outline": false,
	149	"config": {
	150	"file_function": "Soldermask",
	151	"index": 1,
	152	"layer_type": "top"
	153	},
	154	"filename_format": "%PREFIX/soldermask_top.gbr",
	155	"layers": [
	156	29
	157	],
	158	"name": "Soldermask Top",
	159	"polarity": "positive",
	160	"type": "gerber_layer"
	161	},
	162	{
	163	"advanced_options": {
	164	"mirror": false,
	165	"offset_x": 0,
	166	"offset_y": 0,
	167	"rotate": false,
	168	"upside_down": false
	169	},
	170	"board_outline": false,
	171	"config": {
	172	"file_function": "Soldermask",
	173	"index": 1,
	174	"layer_type": "bottom"
	175	},
	176	"filename_format": "%PREFIX/soldermask_bottom.gbr",
	177	"layers": [
	178	30
	179	],
	180	"name": "Soldermask Bottom",
	181	"polarity": "positive",
	182	"type": "gerber_layer"
	183	},
	184	{
	185	"advanced_options": {
	186	"mirror": false,
	187	"offset_x": 0,
	188	"offset_y": 0,
	189	"rotate": false,
	190	"upside_down": false
	191	},
	192	"board_outline": false,
	193	"config": {
	194	"file_function": "Paste",
	195	"layer_type": "top"
	196	},
	197	"filename_format": "%PREFIX/solderpaste_top.gbr",
	198	"layers": [
	199	31
	200	],
	201	"milling": false,
	202	"name": "Solderpaste Top",
	203	"polarity": "positive",
	204	"type": "gerber_layer"
	205	},
	206	{
	207	"advanced_options": {
	208	"mirror": false,
	209	"offset_x": 0,
	210	"offset_y": 0,
	211	"rotate": false,
	212	"upside_down": false
	213	},
	214	"board_outline": false,
	215	"config": {
	216	"file_function": "Paste",
	217	"layer_type": "bottom"
	218	},
	219	"filename_format": "%PREFIX/solderpaste_bottom.gbr",
	220	"layers": [
	221	32
	222	],
	223	"milling": false,
	224	"name": "Solderpaste Bottom",
	225	"polarity": "positive",
	226	"type": "gerber_layer"
	227	},
	228	{
	229	"advanced_options": {
	230	"mirror": false,
	231	"offset_x": 0,
	232	"offset_y": 0,
	233	"rotate": false,
	234	"upside_down": false
	235	},
	236	"board_outline": false,
	237	"config": {
	238	"file_function": "Legend",
	239	"index": 1,
	240	"layer_type": "top"
	241	},
	242	"filename_format": "%PREFIX/silkscreen_top.gbr",
	243	"layers": [
	244	21,
	245	25
	246	],
	247	"milling": false,
	248	"name": "Silkscreen Top",
	249	"polarity": "positive",
	250	"type": "gerber_layer"
	251	},
	252	{
	253	"advanced_options": {
	254	"mirror": false,
	255	"offset_x": 0,
	256	"offset_y": 0,
	257	"rotate": false,
	258	"upside_down": false
	259	},
	260	"board_outline": false,
	261	"config": {
	262	"file_function": "Legend",
	263	"index": 1,
	264	"layer_type": "bottom"
	265	},
	266	"filename_format": "%PREFIX/silkscreen_bottom.gbr",
	267	"layers": [
	268	22,
	269	26
	270	],
	271	"milling": false,
	272	"name": "Silkscreen Bottom",
	273	"polarity": "positive",
	274	"type": "gerber_layer"
	275	}
	276	],
	277	"version": "RS274X"
	278	},
	279	{
	280	"filename_prefix": "CAMOutputs/DrillFiles",
	281	"format_specifier": {
	282	"decimal": 3,
	283	"integer": 3
	284	},
	285	"output_type": "drill",
	286	"outputs": [
	287	{
	288	"advanced_options": {
	289	"mirror": false,
	290	"offset_x": 0,
	291	"offset_y": 0,
	292	"rotate": false,
	293	"upside_down": false
	294	},
	295	"filename_format": "%DRILLPREFIX/drill_%FROM_%TO.xln",
	296	"name": "Auto Drill",
	297	"type": "autodrills"
	298	}
	299	]
	300	},
	301	{
	302	"filename_prefix": "CAMOutputs/Assembly",
	303	"output_type": "assembly",
	304	"outputs": [
	305	{
	306	"filename_format": "%ASSEMBLYPREFIX/%N",
	307	"list_attribute": true,
	308	"list_type": "values",
	309	"name": "Bill of Material",
	310	"output_format": "txt",
	311	"type": "bom"
	312	},
	313	{
	314	"filename_format": "%ASSEMBLYPREFIX/PnP_%N_%BOARDSIDE",
	315	"name": "Pick and Place",
	316	"output_format": "txt",
	317	"type": "pick_and_place"
	318	}
	319	]
	320	},
	321	{
	322	"filename_prefix": "CAMOutputs/DrawingFiles",
	323	"output_type": "drawing",
	324	"outputs": [
	325	]
	326	}
	327	],
	328	"timestamp": "2019-07-17T17:49:43",
	329	"type": "EAGLE CAM job",
	330	"units": "metric",
	331	"version": "9.2.0"
	332	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format