Changeset 4 for trunk/firmware/CubeMX/Src

Timestamp:

Apr 27, 2023, 11:58:15 AM (3 years ago)

Author:

f.jahn

Message:

Fixing project.

Location:

trunk/firmware/CubeMX/Src

Files:

• main.c (modified) (2 diffs)
• stm32g0xx_it.c (modified) (2 diffs)
• tim.c (modified) (1 diff)

trunk/firmware/CubeMX/Src/main.c

@@ -2110 +2110 @@
 
                                 // We disable shortcut detecting interrupt
-                                HAL_NVIC_DisableIRQ(ADC1_COMP_IRQn);
+                                //HAL_NVIC_DisableIRQ(ADC1_COMP_IRQn);
                         //}
                 }
@@ -2852 +2852 @@
 void OVP_not_present__LVP_present(void)
 {
-#ifdef DISABLE_SHORTCUT_DETECTION_DURING_SWITCH_OFF
-        DisableShortCutDetection();
-#endif
+//#ifdef DISABLE_SHORTCUT_DETECTION_DURING_SWITCH_OFF
+//      DisableShortCutDetection();
+//#endif
         HAL_NVIC_DisableIRQ(ADC_DMA_IRQ);
         MOSFETS_Management = &ADC_OVP_not_present__LVP_present;

trunk/firmware/CubeMX/Src/stm32g0xx_it.c

@@ -214 +214 @@
 {
   /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
-  //R2_GPIO_Port->BSRR = R2_Pin;
+  TP2_GPIO_Port->BSRR = TP2_Pin;
 
   static uint32_t current_integral = 0;
@@ -240 +240 @@
   else current_integral = 0;
 
-  //R2_GPIO_Port->BRR = R2_Pin;
+  TP2_GPIO_Port->BRR = TP2_Pin;
 
   return;

trunk/firmware/CubeMX/Src/tim.c

@@ -178 +178 @@
   /* USER CODE BEGIN TIM15_Init 0 */
 
+  // This timer is used to turn on again overcurrent detection after short turn-off.
+
   /* USER CODE END TIM15_Init 0 */