| [1] | 1 | /**
|
|---|
| 2 | ******************************************************************************
|
|---|
| 3 | * @file system_stm32g0xx.c
|
|---|
| 4 | * @author MCD Application Team
|
|---|
| 5 | * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File
|
|---|
| 6 | *
|
|---|
| 7 | * This file provides two functions and one global variable to be called from
|
|---|
| 8 | * user application:
|
|---|
| 9 | * - SystemInit(): This function is called at startup just after reset and
|
|---|
| 10 | * before branch to main program. This call is made inside
|
|---|
| 11 | * the "startup_stm32g0xx.s" file.
|
|---|
| 12 | *
|
|---|
| 13 | * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
|---|
| 14 | * by the user application to setup the SysTick
|
|---|
| 15 | * timer or configure other parameters.
|
|---|
| 16 | *
|
|---|
| 17 | * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
|---|
| 18 | * be called whenever the core clock is changed
|
|---|
| 19 | * during program execution.
|
|---|
| 20 | *
|
|---|
| 21 | * After each device reset the HSI (8 MHz then 16 MHz) is used as system clock source.
|
|---|
| 22 | * Then SystemInit() function is called, in "startup_stm32g0xx.s" file, to
|
|---|
| 23 | * configure the system clock before to branch to main program.
|
|---|
| 24 | *
|
|---|
| 25 | * This file configures the system clock as follows:
|
|---|
| 26 | *=============================================================================
|
|---|
| 27 | *-----------------------------------------------------------------------------
|
|---|
| 28 | * System Clock source | HSI
|
|---|
| 29 | *-----------------------------------------------------------------------------
|
|---|
| 30 | * SYSCLK(Hz) | 16000000
|
|---|
| 31 | *-----------------------------------------------------------------------------
|
|---|
| 32 | * HCLK(Hz) | 16000000
|
|---|
| 33 | *-----------------------------------------------------------------------------
|
|---|
| 34 | * AHB Prescaler | 1
|
|---|
| 35 | *-----------------------------------------------------------------------------
|
|---|
| 36 | * APB Prescaler | 1
|
|---|
| 37 | *-----------------------------------------------------------------------------
|
|---|
| 38 | * HSI Division factor | 1
|
|---|
| 39 | *-----------------------------------------------------------------------------
|
|---|
| 40 | * PLL_M | 1
|
|---|
| 41 | *-----------------------------------------------------------------------------
|
|---|
| 42 | * PLL_N | 8
|
|---|
| 43 | *-----------------------------------------------------------------------------
|
|---|
| 44 | * PLL_P | 7
|
|---|
| 45 | *-----------------------------------------------------------------------------
|
|---|
| 46 | * PLL_Q | 2
|
|---|
| 47 | *-----------------------------------------------------------------------------
|
|---|
| 48 | * PLL_R | 2
|
|---|
| 49 | *-----------------------------------------------------------------------------
|
|---|
| 50 | * Require 48MHz for RNG | Disabled
|
|---|
| 51 | *-----------------------------------------------------------------------------
|
|---|
| 52 | *=============================================================================
|
|---|
| 53 | ******************************************************************************
|
|---|
| 54 | * @attention
|
|---|
| 55 | *
|
|---|
| 56 | * <h2><center>© Copyright (c) 2018 STMicroelectronics.
|
|---|
| 57 | * All rights reserved.</center></h2>
|
|---|
| 58 | *
|
|---|
| 59 | * This software component is licensed by ST under Apache License, Version 2.0,
|
|---|
| 60 | * the "License"; You may not use this file except in compliance with the
|
|---|
| 61 | * License. You may obtain a copy of the License at:
|
|---|
| 62 | * opensource.org/licenses/Apache-2.0
|
|---|
| 63 | *
|
|---|
| 64 | ******************************************************************************
|
|---|
| 65 | */
|
|---|
| 66 |
|
|---|
| 67 | /** @addtogroup CMSIS
|
|---|
| 68 | * @{
|
|---|
| 69 | */
|
|---|
| 70 |
|
|---|
| 71 | /** @addtogroup stm32g0xx_system
|
|---|
| 72 | * @{
|
|---|
| 73 | */
|
|---|
| 74 |
|
|---|
| 75 | /** @addtogroup STM32G0xx_System_Private_Includes
|
|---|
| 76 | * @{
|
|---|
| 77 | */
|
|---|
| 78 |
|
|---|
| 79 | #include "stm32g0xx.h"
|
|---|
| 80 |
|
|---|
| 81 | #if !defined (HSE_VALUE)
|
|---|
| 82 | #define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
|
|---|
| 83 | #endif /* HSE_VALUE */
|
|---|
| 84 |
|
|---|
| 85 | #if !defined (HSI_VALUE)
|
|---|
| 86 | #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
|
|---|
| 87 | #endif /* HSI_VALUE */
|
|---|
| 88 |
|
|---|
| 89 | #if !defined (LSI_VALUE)
|
|---|
| 90 | #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/
|
|---|
| 91 | #endif /* LSI_VALUE */
|
|---|
| 92 |
|
|---|
| 93 | #if !defined (LSE_VALUE)
|
|---|
| 94 | #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/
|
|---|
| 95 | #endif /* LSE_VALUE */
|
|---|
| 96 |
|
|---|
| 97 | /**
|
|---|
| 98 | * @}
|
|---|
| 99 | */
|
|---|
| 100 |
|
|---|
| 101 | /** @addtogroup STM32G0xx_System_Private_TypesDefinitions
|
|---|
| 102 | * @{
|
|---|
| 103 | */
|
|---|
| 104 |
|
|---|
| 105 | /**
|
|---|
| 106 | * @}
|
|---|
| 107 | */
|
|---|
| 108 |
|
|---|
| 109 | /** @addtogroup STM32G0xx_System_Private_Defines
|
|---|
| 110 | * @{
|
|---|
| 111 | */
|
|---|
| 112 |
|
|---|
| 113 | /************************* Miscellaneous Configuration ************************/
|
|---|
| 114 | /*!< Uncomment the following line if you need to relocate your vector Table in
|
|---|
| 115 | Internal SRAM. */
|
|---|
| 116 | /* #define VECT_TAB_SRAM */
|
|---|
| 117 | #define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field.
|
|---|
| 118 | This value must be a multiple of 0x100. */
|
|---|
| 119 | /******************************************************************************/
|
|---|
| 120 | /**
|
|---|
| 121 | * @}
|
|---|
| 122 | */
|
|---|
| 123 |
|
|---|
| 124 | /** @addtogroup STM32G0xx_System_Private_Macros
|
|---|
| 125 | * @{
|
|---|
| 126 | */
|
|---|
| 127 |
|
|---|
| 128 | /**
|
|---|
| 129 | * @}
|
|---|
| 130 | */
|
|---|
| 131 |
|
|---|
| 132 | /** @addtogroup STM32G0xx_System_Private_Variables
|
|---|
| 133 | * @{
|
|---|
| 134 | */
|
|---|
| 135 | /* The SystemCoreClock variable is updated in three ways:
|
|---|
| 136 | 1) by calling CMSIS function SystemCoreClockUpdate()
|
|---|
| 137 | 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
|---|
| 138 | 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
|---|
| 139 | Note: If you use this function to configure the system clock; then there
|
|---|
| 140 | is no need to call the 2 first functions listed above, since SystemCoreClock
|
|---|
| 141 | variable is updated automatically.
|
|---|
| 142 | */
|
|---|
| 143 | uint32_t SystemCoreClock = 16000000UL;
|
|---|
| 144 |
|
|---|
| 145 | const uint32_t AHBPrescTable[16UL] = {0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL, 6UL, 7UL, 8UL, 9UL};
|
|---|
| 146 | const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
|
|---|
| 147 |
|
|---|
| 148 | /**
|
|---|
| 149 | * @}
|
|---|
| 150 | */
|
|---|
| 151 |
|
|---|
| 152 | /** @addtogroup STM32G0xx_System_Private_FunctionPrototypes
|
|---|
| 153 | * @{
|
|---|
| 154 | */
|
|---|
| 155 |
|
|---|
| 156 | /**
|
|---|
| 157 | * @}
|
|---|
| 158 | */
|
|---|
| 159 |
|
|---|
| 160 | /** @addtogroup STM32G0xx_System_Private_Functions
|
|---|
| 161 | * @{
|
|---|
| 162 | */
|
|---|
| 163 |
|
|---|
| 164 | /**
|
|---|
| 165 | * @brief Setup the microcontroller system.
|
|---|
| 166 | * @param None
|
|---|
| 167 | * @retval None
|
|---|
| 168 | */
|
|---|
| 169 | void SystemInit(void)
|
|---|
| 170 | {
|
|---|
| 171 | /* Configure the Vector Table location add offset address ------------------*/
|
|---|
| 172 | #ifdef VECT_TAB_SRAM
|
|---|
| 173 | SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
|---|
| 174 | #else
|
|---|
| 175 | SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|---|
| 176 | #endif
|
|---|
| 177 | }
|
|---|
| 178 |
|
|---|
| 179 | /**
|
|---|
| 180 | * @brief Update SystemCoreClock variable according to Clock Register Values.
|
|---|
| 181 | * The SystemCoreClock variable contains the core clock (HCLK), it can
|
|---|
| 182 | * be used by the user application to setup the SysTick timer or configure
|
|---|
| 183 | * other parameters.
|
|---|
| 184 | *
|
|---|
| 185 | * @note Each time the core clock (HCLK) changes, this function must be called
|
|---|
| 186 | * to update SystemCoreClock variable value. Otherwise, any configuration
|
|---|
| 187 | * based on this variable will be incorrect.
|
|---|
| 188 | *
|
|---|
| 189 | * @note - The system frequency computed by this function is not the real
|
|---|
| 190 | * frequency in the chip. It is calculated based on the predefined
|
|---|
| 191 | * constant and the selected clock source:
|
|---|
| 192 | *
|
|---|
| 193 | * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor
|
|---|
| 194 | *
|
|---|
| 195 | * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
|---|
| 196 | *
|
|---|
| 197 | * - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE
|
|---|
| 198 | *
|
|---|
| 199 | * - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE
|
|---|
| 200 | *
|
|---|
| 201 | * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
|
|---|
| 202 | * or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
|---|
| 203 | *
|
|---|
| 204 | * (**) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
|
|---|
| 205 | * 16 MHz) but the real value may vary depending on the variations
|
|---|
| 206 | * in voltage and temperature.
|
|---|
| 207 | *
|
|---|
| 208 | * (***) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
|
|---|
| 209 | * 8 MHz), user has to ensure that HSE_VALUE is same as the real
|
|---|
| 210 | * frequency of the crystal used. Otherwise, this function may
|
|---|
| 211 | * have wrong result.
|
|---|
| 212 | *
|
|---|
| 213 | * - The result of this function could be not correct when using fractional
|
|---|
| 214 | * value for HSE crystal.
|
|---|
| 215 | *
|
|---|
| 216 | * @param None
|
|---|
| 217 | * @retval None
|
|---|
| 218 | */
|
|---|
| 219 | void SystemCoreClockUpdate(void)
|
|---|
| 220 | {
|
|---|
| 221 | uint32_t tmp;
|
|---|
| 222 | uint32_t pllvco;
|
|---|
| 223 | uint32_t pllr;
|
|---|
| 224 | uint32_t pllsource;
|
|---|
| 225 | uint32_t pllm;
|
|---|
| 226 | uint32_t hsidiv;
|
|---|
| 227 |
|
|---|
| 228 | /* Get SYSCLK source -------------------------------------------------------*/
|
|---|
| 229 | switch (RCC->CFGR & RCC_CFGR_SWS)
|
|---|
| 230 | {
|
|---|
| 231 | case RCC_CFGR_SWS_0: /* HSE used as system clock */
|
|---|
| 232 | SystemCoreClock = HSE_VALUE;
|
|---|
| 233 | break;
|
|---|
| 234 |
|
|---|
| 235 | case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* LSI used as system clock */
|
|---|
| 236 | SystemCoreClock = LSI_VALUE;
|
|---|
| 237 | break;
|
|---|
| 238 |
|
|---|
| 239 | case RCC_CFGR_SWS_2: /* LSE used as system clock */
|
|---|
| 240 | SystemCoreClock = LSE_VALUE;
|
|---|
| 241 | break;
|
|---|
| 242 |
|
|---|
| 243 | case RCC_CFGR_SWS_1: /* PLL used as system clock */
|
|---|
| 244 | /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
|
|---|
| 245 | SYSCLK = PLL_VCO / PLLR
|
|---|
| 246 | */
|
|---|
| 247 | pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
|
|---|
| 248 | pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL;
|
|---|
| 249 |
|
|---|
| 250 | if(pllsource == 0x03UL) /* HSE used as PLL clock source */
|
|---|
| 251 | {
|
|---|
| 252 | pllvco = (HSE_VALUE / pllm);
|
|---|
| 253 | }
|
|---|
| 254 | else /* HSI used as PLL clock source */
|
|---|
| 255 | {
|
|---|
| 256 | pllvco = (HSI_VALUE / pllm);
|
|---|
| 257 | }
|
|---|
| 258 | pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
|
|---|
| 259 | pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
|
|---|
| 260 |
|
|---|
| 261 | SystemCoreClock = pllvco/pllr;
|
|---|
| 262 | break;
|
|---|
| 263 |
|
|---|
| 264 | case 0x00000000U: /* HSI used as system clock */
|
|---|
| 265 | default: /* HSI used as system clock */
|
|---|
| 266 | hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos));
|
|---|
| 267 | SystemCoreClock = (HSI_VALUE/hsidiv);
|
|---|
| 268 | break;
|
|---|
| 269 | }
|
|---|
| 270 | /* Compute HCLK clock frequency --------------------------------------------*/
|
|---|
| 271 | /* Get HCLK prescaler */
|
|---|
| 272 | tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
|
|---|
| 273 | /* HCLK clock frequency */
|
|---|
| 274 | SystemCoreClock >>= tmp;
|
|---|
| 275 | }
|
|---|
| 276 |
|
|---|
| 277 |
|
|---|
| 278 | /**
|
|---|
| 279 | * @}
|
|---|
| 280 | */
|
|---|
| 281 |
|
|---|
| 282 | /**
|
|---|
| 283 | * @}
|
|---|
| 284 | */
|
|---|
| 285 |
|
|---|
| 286 | /**
|
|---|
| 287 | * @}
|
|---|
| 288 | */
|
|---|
| 289 |
|
|---|
| 290 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|---|
