| 1 | /* USER CODE BEGIN Header */
|
|---|
| 2 | /**
|
|---|
| 3 | ******************************************************************************
|
|---|
| 4 | * @file stm32g0xx_hal_conf.h
|
|---|
| 5 | * @author MCD Application Team
|
|---|
| 6 | * @brief HAL configuration file.
|
|---|
| 7 | ******************************************************************************
|
|---|
| 8 | * @attention
|
|---|
| 9 | *
|
|---|
| 10 | * Copyright (c) 2018 STMicroelectronics.
|
|---|
| 11 | * All rights reserved.
|
|---|
| 12 | *
|
|---|
| 13 | * This software is licensed under terms that can be found in the LICENSE file
|
|---|
| 14 | * in the root directory of this software component.
|
|---|
| 15 | * If no LICENSE file comes with this software, it is provided AS-IS.
|
|---|
| 16 | *
|
|---|
| 17 | ******************************************************************************
|
|---|
| 18 | */
|
|---|
| 19 | /* USER CODE END Header */
|
|---|
| 20 |
|
|---|
| 21 | /* Define to prevent recursive inclusion -------------------------------------*/
|
|---|
| 22 | #ifndef STM32G0xx_HAL_CONF_H
|
|---|
| 23 | #define STM32G0xx_HAL_CONF_H
|
|---|
| 24 |
|
|---|
| 25 | #ifdef __cplusplus
|
|---|
| 26 | extern "C" {
|
|---|
| 27 | #endif
|
|---|
| 28 |
|
|---|
| 29 | /* Exported types ------------------------------------------------------------*/
|
|---|
| 30 | /* Exported constants --------------------------------------------------------*/
|
|---|
| 31 |
|
|---|
| 32 | /* ########################## Module Selection ############################## */
|
|---|
| 33 | /**
|
|---|
| 34 | * @brief This is the list of modules to be used in the HAL driver
|
|---|
| 35 | */
|
|---|
| 36 | #define HAL_MODULE_ENABLED
|
|---|
| 37 | #define HAL_ADC_MODULE_ENABLED
|
|---|
| 38 | /* #define HAL_CEC_MODULE_ENABLED */
|
|---|
| 39 | /* #define HAL_COMP_MODULE_ENABLED */
|
|---|
| 40 | #define HAL_CRC_MODULE_ENABLED
|
|---|
| 41 | /* #define HAL_CRYP_MODULE_ENABLED */
|
|---|
| 42 | #define HAL_DAC_MODULE_ENABLED
|
|---|
| 43 | /* #define HAL_EXTI_MODULE_ENABLED */
|
|---|
| 44 | /* #define HAL_FDCAN_MODULE_ENABLED */
|
|---|
| 45 | /* #define HAL_HCD_MODULE_ENABLED */
|
|---|
| 46 | /* #define HAL_I2C_MODULE_ENABLED */
|
|---|
| 47 | /* #define HAL_I2S_MODULE_ENABLED */
|
|---|
| 48 | #define HAL_IWDG_MODULE_ENABLED
|
|---|
| 49 | /* #define HAL_IRDA_MODULE_ENABLED */
|
|---|
| 50 | /* #define HAL_LPTIM_MODULE_ENABLED */
|
|---|
| 51 | /* #define HAL_PCD_MODULE_ENABLED */
|
|---|
| 52 | /* #define HAL_RNG_MODULE_ENABLED */
|
|---|
| 53 | /* #define HAL_RTC_MODULE_ENABLED */
|
|---|
| 54 | /* #define HAL_SMARTCARD_MODULE_ENABLED */
|
|---|
| 55 | /* #define HAL_SMBUS_MODULE_ENABLED */
|
|---|
| 56 | /* #define HAL_SPI_MODULE_ENABLED */
|
|---|
| 57 | #define HAL_TIM_MODULE_ENABLED
|
|---|
| 58 | #define HAL_UART_MODULE_ENABLED
|
|---|
| 59 | /* #define HAL_USART_MODULE_ENABLED */
|
|---|
| 60 | /* #define HAL_WWDG_MODULE_ENABLED */
|
|---|
| 61 | #define HAL_GPIO_MODULE_ENABLED
|
|---|
| 62 | #define HAL_EXTI_MODULE_ENABLED
|
|---|
| 63 | #define HAL_DMA_MODULE_ENABLED
|
|---|
| 64 | #define HAL_RCC_MODULE_ENABLED
|
|---|
| 65 | #define HAL_FLASH_MODULE_ENABLED
|
|---|
| 66 | #define HAL_PWR_MODULE_ENABLED
|
|---|
| 67 | #define HAL_CORTEX_MODULE_ENABLED
|
|---|
| 68 |
|
|---|
| 69 | /* ########################## Register Callbacks selection ############################## */
|
|---|
| 70 | /**
|
|---|
| 71 | * @brief This is the list of modules where register callback can be used
|
|---|
| 72 | */
|
|---|
| 73 | #define USE_HAL_ADC_REGISTER_CALLBACKS 0u
|
|---|
| 74 | #define USE_HAL_CEC_REGISTER_CALLBACKS 0u
|
|---|
| 75 | #define USE_HAL_COMP_REGISTER_CALLBACKS 0u
|
|---|
| 76 | #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
|
|---|
| 77 | #define USE_HAL_DAC_REGISTER_CALLBACKS 0u
|
|---|
| 78 | #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u
|
|---|
| 79 | #define USE_HAL_HCD_REGISTER_CALLBACKS 0u
|
|---|
| 80 | #define USE_HAL_I2C_REGISTER_CALLBACKS 0u
|
|---|
| 81 | #define USE_HAL_I2S_REGISTER_CALLBACKS 0u
|
|---|
| 82 | #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
|
|---|
| 83 | #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
|
|---|
| 84 | #define USE_HAL_PCD_REGISTER_CALLBACKS 0u
|
|---|
| 85 | #define USE_HAL_RNG_REGISTER_CALLBACKS 0u
|
|---|
| 86 | #define USE_HAL_RTC_REGISTER_CALLBACKS 0u
|
|---|
| 87 | #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
|
|---|
| 88 | #define USE_HAL_SPI_REGISTER_CALLBACKS 0u
|
|---|
| 89 | #define USE_HAL_TIM_REGISTER_CALLBACKS 0u
|
|---|
| 90 | #define USE_HAL_UART_REGISTER_CALLBACKS 0u
|
|---|
| 91 | #define USE_HAL_USART_REGISTER_CALLBACKS 0u
|
|---|
| 92 | #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
|
|---|
| 93 |
|
|---|
| 94 | /* ########################## Oscillator Values adaptation ####################*/
|
|---|
| 95 | /**
|
|---|
| 96 | * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
|---|
| 97 | * This value is used by the RCC HAL module to compute the system frequency
|
|---|
| 98 | * (when HSE is used as system clock source, directly or through the PLL).
|
|---|
| 99 | */
|
|---|
| 100 | #if !defined (HSE_VALUE)
|
|---|
| 101 | #define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
|
|---|
| 102 | #endif /* HSE_VALUE */
|
|---|
| 103 |
|
|---|
| 104 | #if !defined (HSE_STARTUP_TIMEOUT)
|
|---|
| 105 | #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
|
|---|
| 106 | #endif /* HSE_STARTUP_TIMEOUT */
|
|---|
| 107 |
|
|---|
| 108 | /**
|
|---|
| 109 | * @brief Internal High Speed oscillator (HSI) value.
|
|---|
| 110 | * This value is used by the RCC HAL module to compute the system frequency
|
|---|
| 111 | * (when HSI is used as system clock source, directly or through the PLL).
|
|---|
| 112 | */
|
|---|
| 113 | #if !defined (HSI_VALUE)
|
|---|
| 114 | #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
|
|---|
| 115 | #endif /* HSI_VALUE */
|
|---|
| 116 |
|
|---|
| 117 | #if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
|
|---|
| 118 | /**
|
|---|
| 119 | * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
|
|---|
| 120 | * This internal oscillator is mainly dedicated to provide a high precision clock to
|
|---|
| 121 | * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
|
|---|
| 122 | * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
|
|---|
| 123 | * which is subject to manufacturing process variations.
|
|---|
| 124 | */
|
|---|
| 125 | #if !defined (HSI48_VALUE)
|
|---|
| 126 | #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
|---|
| 127 | The real value my vary depending on manufacturing process variations.*/
|
|---|
| 128 | #endif /* HSI48_VALUE */
|
|---|
| 129 | #endif
|
|---|
| 130 |
|
|---|
| 131 | /**
|
|---|
| 132 | * @brief Internal Low Speed oscillator (LSI) value.
|
|---|
| 133 | */
|
|---|
| 134 | #if !defined (LSI_VALUE)
|
|---|
| 135 | #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
|
|---|
| 136 | #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
|---|
| 137 | The real value may vary depending on the variations
|
|---|
| 138 | in voltage and temperature.*/
|
|---|
| 139 | /**
|
|---|
| 140 | * @brief External Low Speed oscillator (LSE) value.
|
|---|
| 141 | * This value is used by the UART, RTC HAL module to compute the system frequency
|
|---|
| 142 | */
|
|---|
| 143 | #if !defined (LSE_VALUE)
|
|---|
| 144 | #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
|
|---|
| 145 | #endif /* LSE_VALUE */
|
|---|
| 146 |
|
|---|
| 147 | #if !defined (LSE_STARTUP_TIMEOUT)
|
|---|
| 148 | #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
|
|---|
| 149 | #endif /* LSE_STARTUP_TIMEOUT */
|
|---|
| 150 |
|
|---|
| 151 | /**
|
|---|
| 152 | * @brief External clock source for I2S1 peripheral
|
|---|
| 153 | * This value is used by the RCC HAL module to compute the I2S1 clock source
|
|---|
| 154 | * frequency.
|
|---|
| 155 | */
|
|---|
| 156 | #if !defined (EXTERNAL_I2S1_CLOCK_VALUE)
|
|---|
| 157 | #define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/
|
|---|
| 158 | #endif /* EXTERNAL_I2S1_CLOCK_VALUE */
|
|---|
| 159 |
|
|---|
| 160 | #if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
|
|---|
| 161 | /**
|
|---|
| 162 | * @brief External clock source for I2S2 peripheral
|
|---|
| 163 | * This value is used by the RCC HAL module to compute the I2S2 clock source
|
|---|
| 164 | * frequency.
|
|---|
| 165 | */
|
|---|
| 166 | #if !defined (EXTERNAL_I2S2_CLOCK_VALUE)
|
|---|
| 167 | #define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/
|
|---|
| 168 | #endif /* EXTERNAL_I2S2_CLOCK_VALUE */
|
|---|
| 169 | #endif
|
|---|
| 170 |
|
|---|
| 171 | /* Tip: To avoid modifying this file each time you need to use different HSE,
|
|---|
| 172 | === you can define the HSE value in your toolchain compiler preprocessor. */
|
|---|
| 173 |
|
|---|
| 174 | /* ########################### System Configuration ######################### */
|
|---|
| 175 | /**
|
|---|
| 176 | * @brief This is the HAL system configuration section
|
|---|
| 177 | */
|
|---|
| 178 | #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
|
|---|
| 179 | #define TICK_INT_PRIORITY 2U /*!< tick interrupt priority */
|
|---|
| 180 | #define USE_RTOS 0U
|
|---|
| 181 | #define PREFETCH_ENABLE 1U
|
|---|
| 182 | #define INSTRUCTION_CACHE_ENABLE 1U
|
|---|
| 183 |
|
|---|
| 184 | /* ################## SPI peripheral configuration ########################## */
|
|---|
| 185 |
|
|---|
| 186 | /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
|---|
| 187 | * Activated: CRC code is present inside driver
|
|---|
| 188 | * Deactivated: CRC code cleaned from driver
|
|---|
| 189 | */
|
|---|
| 190 |
|
|---|
| 191 | #define USE_SPI_CRC 0U
|
|---|
| 192 |
|
|---|
| 193 | /* ################## CRYP peripheral configuration ########################## */
|
|---|
| 194 |
|
|---|
| 195 | #define USE_HAL_CRYP_SUSPEND_RESUME 1U
|
|---|
| 196 |
|
|---|
| 197 | /* ########################## Assert Selection ############################## */
|
|---|
| 198 | /**
|
|---|
| 199 | * @brief Uncomment the line below to expanse the "assert_param" macro in the
|
|---|
| 200 | * HAL drivers code
|
|---|
| 201 | */
|
|---|
| 202 | /* #define USE_FULL_ASSERT 1U */
|
|---|
| 203 |
|
|---|
| 204 | /* Includes ------------------------------------------------------------------*/
|
|---|
| 205 | /**
|
|---|
| 206 | * @brief Include modules header file
|
|---|
| 207 | */
|
|---|
| 208 |
|
|---|
| 209 | #ifdef HAL_RCC_MODULE_ENABLED
|
|---|
| 210 | #include "stm32g0xx_hal_rcc.h"
|
|---|
| 211 | #endif /* HAL_RCC_MODULE_ENABLED */
|
|---|
| 212 |
|
|---|
| 213 | #ifdef HAL_GPIO_MODULE_ENABLED
|
|---|
| 214 | #include "stm32g0xx_hal_gpio.h"
|
|---|
| 215 | #endif /* HAL_GPIO_MODULE_ENABLED */
|
|---|
| 216 |
|
|---|
| 217 | #ifdef HAL_DMA_MODULE_ENABLED
|
|---|
| 218 | #include "stm32g0xx_hal_dma.h"
|
|---|
| 219 | #endif /* HAL_DMA_MODULE_ENABLED */
|
|---|
| 220 |
|
|---|
| 221 | #ifdef HAL_CORTEX_MODULE_ENABLED
|
|---|
| 222 | #include "stm32g0xx_hal_cortex.h"
|
|---|
| 223 | #endif /* HAL_CORTEX_MODULE_ENABLED */
|
|---|
| 224 |
|
|---|
| 225 | #ifdef HAL_ADC_MODULE_ENABLED
|
|---|
| 226 | #include "stm32g0xx_hal_adc.h"
|
|---|
| 227 | #include "stm32g0xx_hal_adc_ex.h"
|
|---|
| 228 | #endif /* HAL_ADC_MODULE_ENABLED */
|
|---|
| 229 |
|
|---|
| 230 | #ifdef HAL_CEC_MODULE_ENABLED
|
|---|
| 231 | #include "stm32g0xx_hal_cec.h"
|
|---|
| 232 | #endif /* HAL_CEC_MODULE_ENABLED */
|
|---|
| 233 |
|
|---|
| 234 | #ifdef HAL_COMP_MODULE_ENABLED
|
|---|
| 235 | #include "stm32g0xx_hal_comp.h"
|
|---|
| 236 | #endif /* HAL_COMP_MODULE_ENABLED */
|
|---|
| 237 |
|
|---|
| 238 | #ifdef HAL_CRC_MODULE_ENABLED
|
|---|
| 239 | #include "stm32g0xx_hal_crc.h"
|
|---|
| 240 | #endif /* HAL_CRC_MODULE_ENABLED */
|
|---|
| 241 |
|
|---|
| 242 | #ifdef HAL_CRYP_MODULE_ENABLED
|
|---|
| 243 | #include "stm32g0xx_hal_cryp.h"
|
|---|
| 244 | #endif /* HAL_CRYP_MODULE_ENABLED */
|
|---|
| 245 |
|
|---|
| 246 | #ifdef HAL_DAC_MODULE_ENABLED
|
|---|
| 247 | #include "stm32g0xx_hal_dac.h"
|
|---|
| 248 | #endif /* HAL_DAC_MODULE_ENABLED */
|
|---|
| 249 |
|
|---|
| 250 | #ifdef HAL_EXTI_MODULE_ENABLED
|
|---|
| 251 | #include "stm32g0xx_hal_exti.h"
|
|---|
| 252 | #endif /* HAL_EXTI_MODULE_ENABLED */
|
|---|
| 253 |
|
|---|
| 254 | #ifdef HAL_FLASH_MODULE_ENABLED
|
|---|
| 255 | #include "stm32g0xx_hal_flash.h"
|
|---|
| 256 | #endif /* HAL_FLASH_MODULE_ENABLED */
|
|---|
| 257 |
|
|---|
| 258 | #ifdef HAL_FDCAN_MODULE_ENABLED
|
|---|
| 259 | #include "stm32g0xx_hal_fdcan.h"
|
|---|
| 260 | #endif /* HAL_FDCAN_MODULE_ENABLED */
|
|---|
| 261 |
|
|---|
| 262 | #ifdef HAL_HCD_MODULE_ENABLED
|
|---|
| 263 | #include "stm32g0xx_hal_hcd.h"
|
|---|
| 264 | #endif /* HAL_HCD_MODULE_ENABLED */
|
|---|
| 265 |
|
|---|
| 266 | #ifdef HAL_I2C_MODULE_ENABLED
|
|---|
| 267 | #include "stm32g0xx_hal_i2c.h"
|
|---|
| 268 | #endif /* HAL_I2C_MODULE_ENABLED */
|
|---|
| 269 |
|
|---|
| 270 | #ifdef HAL_I2S_MODULE_ENABLED
|
|---|
| 271 | #include "stm32g0xx_hal_i2s.h"
|
|---|
| 272 | #endif /* HAL_I2S_MODULE_ENABLED */
|
|---|
| 273 |
|
|---|
| 274 | #ifdef HAL_IRDA_MODULE_ENABLED
|
|---|
| 275 | #include "stm32g0xx_hal_irda.h"
|
|---|
| 276 | #endif /* HAL_IRDA_MODULE_ENABLED */
|
|---|
| 277 |
|
|---|
| 278 | #ifdef HAL_IWDG_MODULE_ENABLED
|
|---|
| 279 | #include "stm32g0xx_hal_iwdg.h"
|
|---|
| 280 | #endif /* HAL_IWDG_MODULE_ENABLED */
|
|---|
| 281 |
|
|---|
| 282 | #ifdef HAL_LPTIM_MODULE_ENABLED
|
|---|
| 283 | #include "stm32g0xx_hal_lptim.h"
|
|---|
| 284 | #endif /* HAL_LPTIM_MODULE_ENABLED */
|
|---|
| 285 |
|
|---|
| 286 | #ifdef HAL_PCD_MODULE_ENABLED
|
|---|
| 287 | #include "stm32g0xx_hal_pcd.h"
|
|---|
| 288 | #endif /* HAL_PCD_MODULE_ENABLED */
|
|---|
| 289 |
|
|---|
| 290 | #ifdef HAL_PWR_MODULE_ENABLED
|
|---|
| 291 | #include "stm32g0xx_hal_pwr.h"
|
|---|
| 292 | #endif /* HAL_PWR_MODULE_ENABLED */
|
|---|
| 293 |
|
|---|
| 294 | #ifdef HAL_RNG_MODULE_ENABLED
|
|---|
| 295 | #include "stm32g0xx_hal_rng.h"
|
|---|
| 296 | #endif /* HAL_RNG_MODULE_ENABLED */
|
|---|
| 297 |
|
|---|
| 298 | #ifdef HAL_RTC_MODULE_ENABLED
|
|---|
| 299 | #include "stm32g0xx_hal_rtc.h"
|
|---|
| 300 | #endif /* HAL_RTC_MODULE_ENABLED */
|
|---|
| 301 |
|
|---|
| 302 | #ifdef HAL_SMARTCARD_MODULE_ENABLED
|
|---|
| 303 | #include "stm32g0xx_hal_smartcard.h"
|
|---|
| 304 | #endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
|---|
| 305 |
|
|---|
| 306 | #ifdef HAL_SMBUS_MODULE_ENABLED
|
|---|
| 307 | #include "stm32g0xx_hal_smbus.h"
|
|---|
| 308 | #endif /* HAL_SMBUS_MODULE_ENABLED */
|
|---|
| 309 |
|
|---|
| 310 | #ifdef HAL_SPI_MODULE_ENABLED
|
|---|
| 311 | #include "stm32g0xx_hal_spi.h"
|
|---|
| 312 | #endif /* HAL_SPI_MODULE_ENABLED */
|
|---|
| 313 |
|
|---|
| 314 | #ifdef HAL_TIM_MODULE_ENABLED
|
|---|
| 315 | #include "stm32g0xx_hal_tim.h"
|
|---|
| 316 | #endif /* HAL_TIM_MODULE_ENABLED */
|
|---|
| 317 |
|
|---|
| 318 | #ifdef HAL_UART_MODULE_ENABLED
|
|---|
| 319 | #include "stm32g0xx_hal_uart.h"
|
|---|
| 320 | #endif /* HAL_UART_MODULE_ENABLED */
|
|---|
| 321 |
|
|---|
| 322 | #ifdef HAL_USART_MODULE_ENABLED
|
|---|
| 323 | #include "stm32g0xx_hal_usart.h"
|
|---|
| 324 | #endif /* HAL_USART_MODULE_ENABLED */
|
|---|
| 325 |
|
|---|
| 326 | #ifdef HAL_WWDG_MODULE_ENABLED
|
|---|
| 327 | #include "stm32g0xx_hal_wwdg.h"
|
|---|
| 328 | #endif /* HAL_WWDG_MODULE_ENABLED */
|
|---|
| 329 |
|
|---|
| 330 | /* Exported macro ------------------------------------------------------------*/
|
|---|
| 331 | #ifdef USE_FULL_ASSERT
|
|---|
| 332 | /**
|
|---|
| 333 | * @brief The assert_param macro is used for functions parameters check.
|
|---|
| 334 | * @param expr If expr is false, it calls assert_failed function
|
|---|
| 335 | * which reports the name of the source file and the source
|
|---|
| 336 | * line number of the call that failed.
|
|---|
| 337 | * If expr is true, it returns no value.
|
|---|
| 338 | * @retval None
|
|---|
| 339 | */
|
|---|
| 340 | #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
|---|
| 341 | /* Exported functions ------------------------------------------------------- */
|
|---|
| 342 | void assert_failed(uint8_t *file, uint32_t line);
|
|---|
| 343 | #else
|
|---|
| 344 | #define assert_param(expr) ((void)0U)
|
|---|
| 345 | #endif /* USE_FULL_ASSERT */
|
|---|
| 346 |
|
|---|
| 347 | #ifdef __cplusplus
|
|---|
| 348 | }
|
|---|
| 349 | #endif
|
|---|
| 350 |
|
|---|
| 351 | #endif /* STM32G0xx_HAL_CONF_H */
|
|---|
