Index: ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c =================================================================== --- ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c (revision 44) +++ ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c (revision 44) @@ -0,0 +1,3935 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_defines RCCEx Private Defines + * @{ + */ +#define PLL2_TIMEOUT_VALUE PLL_TIMEOUT_VALUE /* 2 ms */ +#define PLL3_TIMEOUT_VALUE PLL_TIMEOUT_VALUE /* 2 ms */ + +#define DIVIDER_P_UPDATE 0U +#define DIVIDER_Q_UPDATE 1U +#define DIVIDER_R_UPDATE 2U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static HAL_StatusTypeDef RCCEx_PLL2_Config(const RCC_PLL2InitTypeDef *pll2, uint32_t Divider); +static HAL_StatusTypeDef RCCEx_PLL3_Config(const RCC_PLL3InitTypeDef *pll3, uint32_t Divider); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks (SDMMC, CKPER, FMC, QSPI*, OSPI*, DSI, SPI45, SPDIF, DFSDM1, DFSDM2*, FDCAN, SWPMI, SAI23*,SAI2A*, SAI2B*, SAI1, SPI123, + * USART234578, USART16 (USART16910*), RNG, HRTIM1*, I2C123 (I2C1235*), USB, CEC, LPTIM1, LPUART1, I2C4, LPTIM2, LPTIM345, ADC, + * SAI4A*, SAI4B*, SPI6, RTC). + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) are set to their reset values. + * + * (*) : Available on some STM32H7 lines only. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpreg; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /*---------------------------- SPDIFRX configuration -------------------------------*/ + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) + { + + switch (PeriphClkInit->SpdifrxClockSelection) + { + case RCC_SPDIFRXCLKSOURCE_PLL: /* PLL is used as clock source for SPDIFRX*/ + /* Enable PLL1Q Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL2: /* PLL2 is used as clock source for SPDIFRX*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL3: /* PLL3 is used as clock source for SPDIFRX*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_HSI: + /* Internal OSC clock is used as source of SPDIFRX clock*/ + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPDIFRX clock*/ + __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifrxClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SAI1 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) + { + switch (PeriphClkInit->Sai1ClockSelection) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI1*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI1*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PIN: + /* External clock is used as source of SAI1 clock*/ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI1 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(SAI3) + /*---------------------------- SAI2/3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI23) == RCC_PERIPHCLK_SAI23) + { + switch (PeriphClkInit->Sai23ClockSelection) + { + case RCC_SAI23CLKSOURCE_PLL: /* PLL is used as clock source for SAI2/3 */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2/3 */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2/3 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PIN: + /* External clock is used as source of SAI2/3 clock*/ + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2/3 clock */ + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2/3 clock*/ + __HAL_RCC_SAI23_CONFIG(PeriphClkInit->Sai23ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) + /*---------------------------- SAI2A configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2A) == RCC_PERIPHCLK_SAI2A) + { + switch (PeriphClkInit->Sai2AClockSelection) + { + case RCC_SAI2ACLKSOURCE_PLL: /* PLL is used as clock source for SAI2A */ + /* Enable SAI2A Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2A */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2A */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PIN: + /* External clock is used as source of SAI2A clock*/ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2A clock */ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI2A clock */ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2A clock*/ + __HAL_RCC_SAI2A_CONFIG(PeriphClkInit->Sai2AClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI2A*/ + +#if defined(RCC_CDCCIP1R_SAI2BSEL) + + /*---------------------------- SAI2B configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2B) == RCC_PERIPHCLK_SAI2B) + { + switch (PeriphClkInit->Sai2BClockSelection) + { + case RCC_SAI2BCLKSOURCE_PLL: /* PLL is used as clock source for SAI2B */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2B */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2B */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PIN: + /* External clock is used as source of SAI2B clock*/ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2B clock */ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI2B clock */ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2B clock*/ + __HAL_RCC_SAI2B_CONFIG(PeriphClkInit->Sai2BClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI2B*/ + +#if defined(SAI4) + /*---------------------------- SAI4A configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI4A) == RCC_PERIPHCLK_SAI4A) + { + switch (PeriphClkInit->Sai4AClockSelection) + { + case RCC_SAI4ACLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PIN: + /* External clock is used as source of SAI2 clock*/ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + +#if defined(RCC_VER_3_0) + case RCC_SAI4ACLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI4A clock */ + /* SAI4A clock source configuration done later after clock selection check */ + break; +#endif /* RCC_VER_3_0 */ + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI4A clock*/ + __HAL_RCC_SAI4A_CONFIG(PeriphClkInit->Sai4AClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + /*---------------------------- SAI4B configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI4B) == RCC_PERIPHCLK_SAI4B) + { + switch (PeriphClkInit->Sai4BClockSelection) + { + case RCC_SAI4BCLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PIN: + /* External clock is used as source of SAI2 clock*/ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + +#if defined(RCC_VER_3_0) + case RCC_SAI4BCLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI4B clock */ + /* SAI4B clock source configuration done later after clock selection check */ + break; +#endif /* RCC_VER_3_0 */ + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI4B clock*/ + __HAL_RCC_SAI4B_CONFIG(PeriphClkInit->Sai4BClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI4*/ + +#if defined(QUADSPI) + /*---------------------------- QSPI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_QSPI) == RCC_PERIPHCLK_QSPI) + { + switch (PeriphClkInit->QspiClockSelection) + { + case RCC_QSPICLKSOURCE_PLL: /* PLL is used as clock source for QSPI*/ + /* Enable QSPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* QSPI clock source configuration done later after clock selection check */ + break; + + case RCC_QSPICLKSOURCE_PLL2: /* PLL2 is used as clock source for QSPI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* QSPI clock source configuration done later after clock selection check */ + break; + + + case RCC_QSPICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of QSPI clock */ + /* QSPI clock source configuration done later after clock selection check */ + break; + + case RCC_QSPICLKSOURCE_D1HCLK: + /* Domain1 HCLK clock selected as QSPI kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of QSPI clock*/ + __HAL_RCC_QSPI_CONFIG(PeriphClkInit->QspiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*QUADSPI*/ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /*---------------------------- OCTOSPI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) + { + switch (PeriphClkInit->OspiClockSelection) + { + case RCC_OSPICLKSOURCE_PLL: /* PLL is used as clock source for OSPI*/ + /* Enable OSPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* OSPI clock source configuration done later after clock selection check */ + break; + + case RCC_OSPICLKSOURCE_PLL2: /* PLL2 is used as clock source for OSPI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* OSPI clock source configuration done later after clock selection check */ + break; + + + case RCC_OSPICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of OSPI clock */ + /* OSPI clock source configuration done later after clock selection check */ + break; + + case RCC_OSPICLKSOURCE_HCLK: + /* HCLK clock selected as OSPI kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of OSPI clock*/ + __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*OCTOSPI*/ + + /*---------------------------- SPI1/2/3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI123) == RCC_PERIPHCLK_SPI123) + { + switch (PeriphClkInit->Spi123ClockSelection) + { + case RCC_SPI123CLKSOURCE_PLL: /* PLL is used as clock source for SPI1/2/3 */ + /* Enable SPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI1/2/3 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI1/2/3 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PIN: + /* External clock is used as source of SPI1/2/3 clock*/ + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SPI1/2/3 clock */ + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI1/2/3 clock*/ + __HAL_RCC_SPI123_CONFIG(PeriphClkInit->Spi123ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI4/5 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI45) == RCC_PERIPHCLK_SPI45) + { + switch (PeriphClkInit->Spi45ClockSelection) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* CD/D2 PCLK2 as clock source for SPI4/5 */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI4/5 */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + case RCC_SPI45CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI4/5 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of SPI4/5 clock*/ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of SPI4/5 clock */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSE: + /* HSE, oscillator is used as source of SPI4/5 clock */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI4/5 clock*/ + __HAL_RCC_SPI45_CONFIG(PeriphClkInit->Spi45ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI6 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI6) == RCC_PERIPHCLK_SPI6) + { + switch (PeriphClkInit->Spi6ClockSelection) + { + case RCC_SPI6CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for SPI6*/ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI6*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* SPI6 clock source configuration done later after clock selection check */ + break; + case RCC_SPI6CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI6*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of SPI6 clock*/ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSE: + /* HSE, oscillator is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; +#if defined(RCC_SPI6CLKSOURCE_PIN) + case RCC_SPI6CLKSOURCE_PIN: + /* 2S_CKIN is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; +#endif + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI6 clock*/ + __HAL_RCC_SPI6_CONFIG(PeriphClkInit->Spi6ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(DSI) + /*---------------------------- DSI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) + { + switch (PeriphClkInit->DsiClockSelection) + { + + case RCC_DSICLKSOURCE_PLL2: /* PLL2 is used as clock source for DSI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* DSI clock source configuration done later after clock selection check */ + break; + + case RCC_DSICLKSOURCE_PHY: + /* PHY is used as clock source for DSI*/ + /* DSI clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of DSI clock*/ + __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*DSI*/ + +#if defined(FDCAN1) || defined(FDCAN2) + /*---------------------------- FDCAN configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + switch (PeriphClkInit->FdcanClockSelection) + { + case RCC_FDCANCLKSOURCE_PLL: /* PLL is used as clock source for FDCAN*/ + /* Enable FDCAN Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_PLL2: /* PLL2 is used as clock source for FDCAN*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_HSE: + /* HSE is used as clock source for FDCAN*/ + /* FDCAN clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FDCAN clock*/ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*FDCAN1 || FDCAN2*/ + + /*---------------------------- FMC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMC) == RCC_PERIPHCLK_FMC) + { + switch (PeriphClkInit->FmcClockSelection) + { + case RCC_FMCCLKSOURCE_PLL: /* PLL is used as clock source for FMC*/ + /* Enable FMC Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* FMC clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_PLL2: /* PLL2 is used as clock source for FMC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* FMC clock source configuration done later after clock selection check */ + break; + + + case RCC_FMCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of FMC clock */ + /* FMC clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_HCLK: + /* D1/CD HCLK clock selected as FMC kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FMC clock*/ + __HAL_RCC_FMC_CONFIG(PeriphClkInit->FmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- RTC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if (ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified */ + if ((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg; + } + + /* If LSE is selected as RTC clock source (and enabled prior to Backup Domain reset), wait for LSE reactivation */ + if (PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + } + + + /*-------------------------- USART1/6 configuration --------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART16) == RCC_PERIPHCLK_USART16) + { + switch (PeriphClkInit->Usart16ClockSelection) + { + case RCC_USART16CLKSOURCE_PCLK2: /* CD/D2 PCLK2 as clock source for USART1/6 */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_PLL2: /* PLL2 is used as clock source for USART1/6 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_PLL3: /* PLL3 is used as clock source for USART1/6 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART1/6 clock */ + __HAL_RCC_USART16_CONFIG(PeriphClkInit->Usart16ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- USART2/3/4/5/7/8 Configuration --------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART234578) == RCC_PERIPHCLK_USART234578) + { + switch (PeriphClkInit->Usart234578ClockSelection) + { + case RCC_USART234578CLKSOURCE_PCLK1: /* CD/D2 PCLK1 as clock source for USART2/3/4/5/7/8 */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL2: /* PLL2 is used as clock source for USART2/3/4/5/7/8 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL3: /* PLL3 is used as clock source for USART2/3/4/5/7/8 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART2/3/4/5/7/8 clock */ + __HAL_RCC_USART234578_CONFIG(PeriphClkInit->Usart234578ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- LPUART1 Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + switch (PeriphClkInit->Lpuart1ClockSelection) + { + case RCC_LPUART1CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPUART1 */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPUART1 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPUART1 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_LSE: + /* LSE, oscillator is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPUART1 clock */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM1 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) + { + switch (PeriphClkInit->Lptim1ClockSelection) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: /* CD/D2 PCLK1 as clock source for LPTIM1*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM1*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM1*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM1 clock*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM1 clock*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM1 clock */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM1 clock*/ + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM2 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) + { + switch (PeriphClkInit->Lptim2ClockSelection) + { + case RCC_LPTIM2CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPTIM2*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM2 clock*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM2 clock*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM2CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM2 clock */ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM2 clock*/ + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM345 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM345) == RCC_PERIPHCLK_LPTIM345) + { + switch (PeriphClkInit->Lptim345ClockSelection) + { + + case RCC_LPTIM345CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPTIM3/4/5 */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM3/4/5 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM3/4/5 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM345CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM3/4/5 clock */ + __HAL_RCC_LPTIM345_CONFIG(PeriphClkInit->Lptim345ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ I2C1/2/3/5* Configuration ------------------------*/ +#if defined(I2C5) + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1235) == RCC_PERIPHCLK_I2C1235) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1235CLKSOURCE(PeriphClkInit->I2c1235ClockSelection)); + + if ((PeriphClkInit->I2c1235ClockSelection) == RCC_I2C1235CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C1235_CONFIG(PeriphClkInit->I2c1235ClockSelection); + + } +#else + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C123) == RCC_PERIPHCLK_I2C123) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C123CLKSOURCE(PeriphClkInit->I2c123ClockSelection)); + + if ((PeriphClkInit->I2c123ClockSelection) == RCC_I2C123CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C123_CONFIG(PeriphClkInit->I2c123ClockSelection); + + } +#endif /* I2C5 */ + + /*------------------------------ I2C4 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); + + if ((PeriphClkInit->I2c4ClockSelection) == RCC_I2C4CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); + + } + + /*---------------------------- ADC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + switch (PeriphClkInit->AdcClockSelection) + { + + case RCC_ADCCLKSOURCE_PLL2: /* PLL2 is used as clock source for ADC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_PLL3: /* PLL3 is used as clock source for ADC*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of ADC clock */ + /* ADC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of ADC clock*/ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ USB Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + + switch (PeriphClkInit->UsbClockSelection) + { + case RCC_USBCLKSOURCE_PLL: /* PLL is used as clock source for USB*/ + /* Enable USB Clock output generated form System USB . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* USB clock source configuration done later after clock selection check */ + break; + + case RCC_USBCLKSOURCE_PLL3: /* PLL3 is used as clock source for USB*/ + + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + + /* USB clock source configuration done later after clock selection check */ + break; + + case RCC_USBCLKSOURCE_HSI48: + /* HSI48 oscillator is used as source of USB clock */ + /* USB clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USB clock*/ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + } + + /*------------------------------------- SDMMC Configuration ------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC) == RCC_PERIPHCLK_SDMMC) + { + /* Check the parameters */ + assert_param(IS_RCC_SDMMC(PeriphClkInit->SdmmcClockSelection)); + + switch (PeriphClkInit->SdmmcClockSelection) + { + case RCC_SDMMCCLKSOURCE_PLL: /* PLL is used as clock source for SDMMC*/ + /* Enable SDMMC Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SDMMC clock source configuration done later after clock selection check */ + break; + + case RCC_SDMMCCLKSOURCE_PLL2: /* PLL2 is used as clock source for SDMMC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* SDMMC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SDMMC clock*/ + __HAL_RCC_SDMMC_CONFIG(PeriphClkInit->SdmmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(LTDC) + /*-------------------------------------- LTDC Configuration -----------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* LTDC */ + + /*------------------------------ RNG Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) + { + + switch (PeriphClkInit->RngClockSelection) + { + case RCC_RNGCLKSOURCE_PLL: /* PLL is used as clock source for RNG*/ + /* Enable RNG Clock output generated form System RNG . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* RNG clock source configuration done later after clock selection check */ + break; + + case RCC_RNGCLKSOURCE_LSE: /* LSE is used as clock source for RNG*/ + + /* RNG clock source configuration done later after clock selection check */ + break; + + case RCC_RNGCLKSOURCE_LSI: /* LSI is used as clock source for RNG*/ + + /* RNG clock source configuration done later after clock selection check */ + break; + case RCC_RNGCLKSOURCE_HSI48: + /* HSI48 oscillator is used as source of RNG clock */ + /* RNG clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of RNG clock*/ + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + } + + /*------------------------------ SWPMI1 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); + + /* Configure the SWPMI1 interface clock source */ + __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); + } +#if defined(HRTIM1) + /*------------------------------ HRTIM1 clock Configuration ----------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HRTIM1) == RCC_PERIPHCLK_HRTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_HRTIM1CLKSOURCE(PeriphClkInit->Hrtim1ClockSelection)); + + /* Configure the HRTIM1 clock source */ + __HAL_RCC_HRTIM1_CONFIG(PeriphClkInit->Hrtim1ClockSelection); + } +#endif /*HRTIM1*/ + /*------------------------------ DFSDM1 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + } + +#if defined(DFSDM2_BASE) + /*------------------------------ DFSDM2 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); + + /* Configure the DFSDM2 interface clock source */ + __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); + } +#endif /* DFSDM2 */ + + /*------------------------------------ TIM configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) + { + /* Check the parameters */ + assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection)); + + /* Configure Timer Prescaler */ + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + + /*------------------------------------ CKPER configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CKPER) == RCC_PERIPHCLK_CKPER) + { + /* Check the parameters */ + assert_param(IS_RCC_CLKPSOURCE(PeriphClkInit->CkperClockSelection)); + + /* Configure the CKPER clock source */ + __HAL_RCC_CLKP_CONFIG(PeriphClkInit->CkperClockSelection); + } + + /*------------------------------ CEC Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC interface clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } + + /*---------------------------- PLL2 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVP) == RCC_PERIPHCLK_PLL2_DIVP) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVQ) == RCC_PERIPHCLK_PLL2_DIVQ) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVR) == RCC_PERIPHCLK_PLL2_DIVR) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + /*---------------------------- PLL3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVP) == RCC_PERIPHCLK_PLL3_DIVP) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVQ) == RCC_PERIPHCLK_PLL3_DIVQ) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVR) == RCC_PERIPHCLK_PLL3_DIVR) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + if (status == HAL_OK) + { + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks : + * (SDMMC, CKPER, FMC, QSPI*, OSPI*, DSI*, SPI45, SPDIF, DFSDM1, DFSDM2*, FDCAN, SWPMI, SAI23*, SAI1, SPI123, + * USART234578, USART16, RNG, HRTIM1*, I2C123 (I2C1235*), USB, CEC, LPTIM1, LPUART1, I2C4, LPTIM2, LPTIM345, ADC. + * SAI4A*, SAI4B*, SPI6, RTC, TIM). + * @retval None + * + * (*) : Available on some STM32H7 lines only. + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = + RCC_PERIPHCLK_USART16 | RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_LPUART1 | + RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_LPTIM345 | + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SPI123 | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6 | + RCC_PERIPHCLK_FDCAN | RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_USB | + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_RTC | + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMC | RCC_PERIPHCLK_SPDIFRX | RCC_PERIPHCLK_TIM | + RCC_PERIPHCLK_CKPER; + +#if defined(I2C5) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C1235; +#else + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C123; +#endif /*I2C5*/ +#if defined(RCC_CDCCIP1R_SAI2ASEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI2A; +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI2B; +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(SAI3) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI23; +#endif /* SAI3 */ +#if defined(SAI4) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI4A; + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI4B; +#endif /* SAI4 */ +#if defined(DFSDM2_BASE) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_DFSDM2; +#endif /* DFSDM2 */ +#if defined(QUADSPI) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_QSPI; +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_OSPI; +#endif /* OCTOSPI1 || OCTOSPI2 */ +#if defined(HRTIM1) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_HRTIM1; +#endif /* HRTIM1 */ +#if defined(LTDC) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LTDC; +#endif /* LTDC */ +#if defined(DSI) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_DSI; +#endif /* DSI */ + + /* Get the PLL3 Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLL3.PLL3M = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); + PeriphClkInit->PLL3.PLL3N = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_N3) >> RCC_PLL3DIVR_N3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3R = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_R3) >> RCC_PLL3DIVR_R3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3P = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_P3) >> RCC_PLL3DIVR_P3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3Q = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_Q3) >> RCC_PLL3DIVR_Q3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3RGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL3RGE) >> RCC_PLLCFGR_PLL3RGE_Pos); + PeriphClkInit->PLL3.PLL3VCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL3VCOSEL) >> RCC_PLLCFGR_PLL3VCOSEL_Pos); + + /* Get the PLL2 Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLL2.PLL2M = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); + PeriphClkInit->PLL2.PLL2N = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_N2) >> RCC_PLL2DIVR_N2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2R = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_R2) >> RCC_PLL2DIVR_R2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2P = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_P2) >> RCC_PLL2DIVR_P2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2Q = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_Q2) >> RCC_PLL2DIVR_Q2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2RGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL2RGE) >> RCC_PLLCFGR_PLL2RGE_Pos); + PeriphClkInit->PLL2.PLL2VCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL2VCOSEL) >> RCC_PLLCFGR_PLL2VCOSEL_Pos); + + /* Get the USART1 configuration --------------------------------------------*/ + PeriphClkInit->Usart16ClockSelection = __HAL_RCC_GET_USART16_SOURCE(); + /* Get the USART2/3/4/5/7/8 clock source -----------------------------------*/ + PeriphClkInit->Usart234578ClockSelection = __HAL_RCC_GET_USART234578_SOURCE(); + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#if defined(I2C5) + /* Get the I2C1/2/3/5 clock source -----------------------------------------*/ + PeriphClkInit->I2c1235ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#else + /* Get the I2C1/2/3 clock source -------------------------------------------*/ + PeriphClkInit->I2c123ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#endif /*I2C5*/ + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); + /* Get the LPTIM3/4/5 clock source -----------------------------------------*/ + PeriphClkInit->Lptim345ClockSelection = __HAL_RCC_GET_LPTIM345_SOURCE(); + /* Get the SAI1 clock source -----------------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); +#if defined(SAI3) + /* Get the SAI2/3 clock source ---------------------------------------------*/ + PeriphClkInit->Sai23ClockSelection = __HAL_RCC_GET_SAI23_SOURCE(); +#endif /*SAI3*/ +#if defined(RCC_CDCCIP1R_SAI2ASEL_0) + /* Get the SAI2A clock source ---------------------------------------------*/ + PeriphClkInit->Sai2AClockSelection = __HAL_RCC_GET_SAI2A_SOURCE(); +#endif /*SAI2A*/ +#if defined(RCC_CDCCIP1R_SAI2BSEL_0) + /* Get the SAI2B clock source ---------------------------------------------*/ + PeriphClkInit->Sai2BClockSelection = __HAL_RCC_GET_SAI2B_SOURCE(); +#endif /*SAI2B*/ +#if defined(SAI4) + /* Get the SAI4A clock source ----------------------------------------------*/ + PeriphClkInit->Sai4AClockSelection = __HAL_RCC_GET_SAI4A_SOURCE(); + /* Get the SAI4B clock source ----------------------------------------------*/ + PeriphClkInit->Sai4BClockSelection = __HAL_RCC_GET_SAI4B_SOURCE(); +#endif /*SAI4*/ + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the USB clock source ------------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); + /* Get the SDMMC clock source ----------------------------------------------*/ + PeriphClkInit->SdmmcClockSelection = __HAL_RCC_GET_SDMMC_SOURCE(); + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); +#if defined(HRTIM1) + /* Get the HRTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Hrtim1ClockSelection = __HAL_RCC_GET_HRTIM1_SOURCE(); +#endif /* HRTIM1 */ + /* Get the ADC clock source ------------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + /* Get the SWPMI1 clock source ---------------------------------------------*/ + PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); + /* Get the DFSDM1 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); +#if defined(DFSDM2_BASE) + /* Get the DFSDM2 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); +#endif /* DFSDM2 */ + /* Get the SPDIFRX clock source --------------------------------------------*/ + PeriphClkInit->SpdifrxClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); + /* Get the SPI1/2/3 clock source -------------------------------------------*/ + PeriphClkInit->Spi123ClockSelection = __HAL_RCC_GET_SPI123_SOURCE(); + /* Get the SPI4/5 clock source ---------------------------------------------*/ + PeriphClkInit->Spi45ClockSelection = __HAL_RCC_GET_SPI45_SOURCE(); + /* Get the SPI6 clock source -----------------------------------------------*/ + PeriphClkInit->Spi6ClockSelection = __HAL_RCC_GET_SPI6_SOURCE(); + /* Get the FDCAN clock source ----------------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); + /* Get the CEC clock source ------------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); + /* Get the FMC clock source ------------------------------------------------*/ + PeriphClkInit->FmcClockSelection = __HAL_RCC_GET_FMC_SOURCE(); +#if defined(QUADSPI) + /* Get the QSPI clock source -----------------------------------------------*/ + PeriphClkInit->QspiClockSelection = __HAL_RCC_GET_QSPI_SOURCE(); +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /* Get the OSPI clock source -----------------------------------------------*/ + PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); +#endif /* OCTOSPI1 || OCTOSPI2 */ + +#if defined(DSI) + /* Get the DSI clock source ------------------------------------------------*/ + PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); +#endif /*DSI*/ + + /* Get the CKPER clock source ----------------------------------------------*/ + PeriphClkInit->CkperClockSelection = __HAL_RCC_GET_CLKP_SOURCE(); + + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->CFGR & RCC_CFGR_TIMPRE) == 0U) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk: Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_SAI1 : SAI1 peripheral clock + * @arg RCC_PERIPHCLK_SAI23 : SAI2/3 peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI2A : SAI2A peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI2B : SAI2B peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI4A : SAI4A peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI4B : SAI4B peripheral clock (*) + * @arg RCC_PERIPHCLK_SPI123: SPI1/2/3 peripheral clock + * @arg RCC_PERIPHCLK_ADC : ADC peripheral clock + * @arg RCC_PERIPHCLK_SDMMC : SDMMC peripheral clock + * @arg RCC_PERIPHCLK_SPI6 : SPI6 peripheral clock + * @retval Frequency in KHz + * + * (*) : Available on some STM32H7 lines only. + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint64_t PeriphClk) +{ + PLL1_ClocksTypeDef pll1_clocks; + PLL2_ClocksTypeDef pll2_clocks; + PLL3_ClocksTypeDef pll3_clocks; + + /* This variable is used to store the clock frequency (value in Hz) */ + uint32_t frequency; + /* This variable is used to store the SAI and CKP clock source */ + uint32_t saiclocksource; + uint32_t ckpclocksource; + uint32_t srcclk; + + if (PeriphClk == RCC_PERIPHCLK_SAI1) + { + + saiclocksource = __HAL_RCC_GET_SAI1_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL1 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI1CLKSOURCE_PLL2: /* PLL2 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI1CLKSOURCE_PLL3: /* PLL3 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI1CLKSOURCE_CLKP: /* CKPER is the clock source for SAI1*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI1CLKSOURCE_PIN): /* External clock is the clock source for SAI1 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } + +#if defined(SAI3) + else if (PeriphClk == RCC_PERIPHCLK_SAI23) + { + + saiclocksource = __HAL_RCC_GET_SAI23_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI23CLKSOURCE_PLL: /* PLL1 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI23CLKSOURCE_PLL2: /* PLL2 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI23CLKSOURCE_PLL3: /* PLL3 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI23CLKSOURCE_CLKP: /* CKPER is the clock source for SAI2/3 */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI23CLKSOURCE_PIN): /* External clock is the clock source for SAI2/3 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) + + else if (PeriphClk == RCC_PERIPHCLK_SAI2A) + { + saiclocksource = __HAL_RCC_GET_SAI2A_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI2ACLKSOURCE_PLL: /* PLL1 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI2ACLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2ACLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2ACLKSOURCE_CLKP: /* CKPER is the clock source for SAI2A */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI2ACLKSOURCE_PIN): /* External clock is the clock source for SAI2A */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + + } +#endif + +#if defined(RCC_CDCCIP1R_SAI2BSEL_0) + else if (PeriphClk == RCC_PERIPHCLK_SAI2B) + { + + saiclocksource = __HAL_RCC_GET_SAI2B_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI2BCLKSOURCE_PLL: /* PLL1 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI2BCLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2BCLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2BCLKSOURCE_CLKP: /* CKPER is the clock source for SAI2B*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + break; + } + + case (RCC_SAI2BCLKSOURCE_PIN): /* External clock is the clock source for SAI2B */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } +#endif + +#if defined(SAI4) + else if (PeriphClk == RCC_PERIPHCLK_SAI4A) + { + + saiclocksource = __HAL_RCC_GET_SAI4A_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI4ACLKSOURCE_PLL: /* PLL1 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI4ACLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4ACLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4ACLKSOURCE_CLKP: /* CKPER is the clock source for SAI4A*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case RCC_SAI4ACLKSOURCE_PIN: /* External clock is the clock source for SAI4A */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } + + else if (PeriphClk == RCC_PERIPHCLK_SAI4B) + { + + saiclocksource = __HAL_RCC_GET_SAI4B_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI4BCLKSOURCE_PLL: /* PLL1 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI4BCLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4BCLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4BCLKSOURCE_CLKP: /* CKPER is the clock source for SAI4B*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case RCC_SAI4BCLKSOURCE_PIN: /* External clock is the clock source for SAI4B */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } +#endif /*SAI4*/ + else if (PeriphClk == RCC_PERIPHCLK_SPI123) + { + /* Get SPI1/2/3 clock source */ + srcclk = __HAL_RCC_GET_SPI123_SOURCE(); + + switch (srcclk) + { + case RCC_SPI123CLKSOURCE_PLL: /* PLL1 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI123CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SPI123CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SPI123CLKSOURCE_CLKP: /* CKPER is the clock source for SPI123 */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SPI123CLKSOURCE_PIN): /* External clock is the clock source for I2S */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SPI45) + { + /* Get SPI45 clock source */ + srcclk = __HAL_RCC_GET_SPI45_SOURCE(); + switch (srcclk) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* CD/D2 PCLK2 is the clock source for SPI4/5 */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + break; + } + case RCC_SPI45CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_HSI: /* HSI is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_CSI: /* CSI is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) + { + frequency = CSI_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_HSE: /* HSE is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_ADC) + { + /* Get ADC clock source */ + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + switch (srcclk) + { + case RCC_ADCCLKSOURCE_PLL2: + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_ADCCLKSOURCE_PLL3: + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_R_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_ADCCLKSOURCE_CLKP: + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SDMMC) + { + /* Get SDMMC clock source */ + srcclk = __HAL_RCC_GET_SDMMC_SOURCE(); + + switch (srcclk) + { + case RCC_SDMMCCLKSOURCE_PLL: /* PLL1 is the clock source for SDMMC */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SDMMCCLKSOURCE_PLL2: /* PLL2 is the clock source for SDMMC */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_R_Frequency; + } + else + { + frequency = 0; + } + break; + } + + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SPI6) + { + /* Get SPI6 clock source */ + srcclk = __HAL_RCC_GET_SPI6_SOURCE(); + + switch (srcclk) + { + case RCC_SPI6CLKSOURCE_D3PCLK1: /* D3PCLK1 (PCLK4) is the clock source for SPI6 */ + { + frequency = HAL_RCCEx_GetD3PCLK1Freq(); + break; + } + case RCC_SPI6CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_HSI: /* HSI is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_CSI: /* CSI is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) + { + frequency = CSI_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_HSE: /* HSE is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } +#if defined(RCC_SPI6CLKSOURCE_PIN) + case RCC_SPI6CLKSOURCE_PIN: /* External clock is the clock source for SPI6 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } +#endif /* RCC_SPI6CLKSOURCE_PIN */ + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_FDCAN) + { + /* Get FDCAN clock source */ + srcclk = __HAL_RCC_GET_FDCAN_SOURCE(); + + switch (srcclk) + { + case RCC_FDCANCLKSOURCE_HSE: /* HSE is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_FDCANCLKSOURCE_PLL: /* PLL is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_FDCANCLKSOURCE_PLL2: /* PLL2 is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + default : + { + frequency = 0; + break; + } + } + } + else + { + frequency = 0; + } + + return frequency; +} + + +/** + * @brief Returns the D1PCLK1 frequency + * @note Each time D1PCLK1 changes, this function must be called to update the + * right D1PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval D1PCLK1 frequency + */ +uint32_t HAL_RCCEx_GetD1PCLK1Freq(void) +{ +#if defined(RCC_D1CFGR_D1PPRE) + /* Get HCLK source and Compute D1PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1PPRE) >> RCC_D1CFGR_D1PPRE_Pos] & 0x1FU)); +#else + /* Get HCLK source and Compute D1PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE) >> RCC_CDCFGR1_CDPPRE_Pos] & 0x1FU)); +#endif +} + +/** + * @brief Returns the D3PCLK1 frequency + * @note Each time D3PCLK1 changes, this function must be called to update the + * right D3PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval D3PCLK1 frequency + */ +uint32_t HAL_RCCEx_GetD3PCLK1Freq(void) +{ +#if defined(RCC_D3CFGR_D3PPRE) + /* Get HCLK source and Compute D3PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->D3CFGR & RCC_D3CFGR_D3PPRE) >> RCC_D3CFGR_D3PPRE_Pos] & 0x1FU)); +#else + /* Get HCLK source and Compute D3PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE) >> RCC_SRDCFGR_SRDPPRE_Pos] & 0x1FU)); +#endif +} +/** +* @brief Returns the PLL2 clock frequencies :PLL2_P_Frequency,PLL2_R_Frequency and PLL2_Q_Frequency + * @note The PLL2 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL2CLK changes, this function must be called to update the + * right PLL2CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL2_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL2ClockFreq(PLL2_ClocksTypeDef *PLL2_Clocks) +{ + uint32_t pllsource, pll2m, pll2fracen, hsivalue; + float_t fracn2, pll2vco; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLL2M) * PLL2N + PLL2xCLK = PLL2_VCO / PLL2x + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll2m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM2) >> 12); + pll2fracen = (RCC->PLLCFGR & RCC_PLLCFGR_PLL2FRACEN) >> RCC_PLLCFGR_PLL2FRACEN_Pos; + fracn2 = (float_t)(uint32_t)(pll2fracen * ((RCC->PLL2FRACR & RCC_PLL2FRACR_FRACN2) >> 3)); + + if (pll2m != 0U) + { + switch (pllsource) + { + + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll2vco = ((float_t)hsivalue / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + } + else + { + pll2vco = ((float_t)HSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + } + break; + + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll2vco = ((float_t)CSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll2vco = ((float_t)HSE_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll2vco = ((float_t)CSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + } + PLL2_Clocks->PLL2_P_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_P2) >> 9) + (float_t)1)) ; + PLL2_Clocks->PLL2_Q_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_Q2) >> 16) + (float_t)1)) ; + PLL2_Clocks->PLL2_R_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_R2) >> 24) + (float_t)1)) ; + } + else + { + PLL2_Clocks->PLL2_P_Frequency = 0U; + PLL2_Clocks->PLL2_Q_Frequency = 0U; + PLL2_Clocks->PLL2_R_Frequency = 0U; + } +} + +/** +* @brief Returns the PLL3 clock frequencies :PLL3_P_Frequency,PLL3_R_Frequency and PLL3_Q_Frequency + * @note The PLL3 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL3CLK changes, this function must be called to update the + * right PLL3CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL3_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL3ClockFreq(PLL3_ClocksTypeDef *PLL3_Clocks) +{ + uint32_t pllsource, pll3m, pll3fracen, hsivalue; + float_t fracn3, pll3vco; + + /* PLL3_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLL3M) * PLL3N + PLL3xCLK = PLL3_VCO / PLLxR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll3m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM3) >> 20) ; + pll3fracen = (RCC->PLLCFGR & RCC_PLLCFGR_PLL3FRACEN) >> RCC_PLLCFGR_PLL3FRACEN_Pos; + fracn3 = (float_t)(uint32_t)(pll3fracen * ((RCC->PLL3FRACR & RCC_PLL3FRACR_FRACN3) >> 3)); + + if (pll3m != 0U) + { + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll3vco = ((float_t)hsivalue / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + } + else + { + pll3vco = ((float_t)HSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + } + break; + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll3vco = ((float_t)CSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll3vco = ((float_t)HSE_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll3vco = ((float_t)CSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + } + PLL3_Clocks->PLL3_P_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_P3) >> 9) + (float_t)1)) ; + PLL3_Clocks->PLL3_Q_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_Q3) >> 16) + (float_t)1)) ; + PLL3_Clocks->PLL3_R_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_R3) >> 24) + (float_t)1)) ; + } + else + { + PLL3_Clocks->PLL3_P_Frequency = 0U; + PLL3_Clocks->PLL3_Q_Frequency = 0U; + PLL3_Clocks->PLL3_R_Frequency = 0U; + } + +} + +/** +* @brief Returns the PLL1 clock frequencies :PLL1_P_Frequency,PLL1_R_Frequency and PLL1_Q_Frequency + * @note The PLL1 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL1CLK changes, this function must be called to update the + * right PLL1CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL1_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL1ClockFreq(PLL1_ClocksTypeDef *PLL1_Clocks) +{ + uint32_t pllsource, pll1m, pll1fracen, hsivalue; + float_t fracn1, pll1vco; + + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll1m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> 4); + pll1fracen = RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN; + fracn1 = (float_t)(uint32_t)(pll1fracen * ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> 3)); + + if (pll1m != 0U) + { + switch (pllsource) + { + + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll1vco = ((float_t)hsivalue / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + else + { + pll1vco = ((float_t)HSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + break; + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll1vco = ((float_t)CSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll1vco = ((float_t)HSE_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll1vco = ((float_t)HSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + } + + PLL1_Clocks->PLL1_P_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> 9) + (float_t)1)) ; + PLL1_Clocks->PLL1_Q_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_Q1) >> 16) + (float_t)1)) ; + PLL1_Clocks->PLL1_R_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_R1) >> 24) + (float_t)1)) ; + } + else + { + PLL1_Clocks->PLL1_P_Frequency = 0U; + PLL1_Clocks->PLL1_Q_Frequency = 0U; + PLL1_Clocks->PLL1_R_Frequency = 0U; + } + +} + +/** + * @brief Returns the main System frequency + * @note Each time System clock changes, this function must be called to update the + * right core clock value. Otherwise, any configuration based on this function will be incorrect. + * @note The SystemCoreClock CMSIS variable is used to store System current Core Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCCEx_GetD1SysClockFreq(void) +{ + uint32_t common_system_clock; + +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos] & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos] & 0x1FU); +#endif + + /* Update the SystemD2Clock global variable */ +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + return common_system_clock; +} +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended System Control functions + * @brief Extended Peripheral Control functions + * @{ + */ +/** + * @brief Enables the LSE Clock Security System. + * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled + * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC + * clock with HAL_RCCEx_PeriphCLKConfig(). + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disables the LSE Clock Security System. + * @note LSE Clock Security System can only be disabled after a LSE failure detection. + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + /* Disable LSE CSS IT if any */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. + * @note LSE Clock Security System Interrupt is mapped on EXTI line 18 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 18 */ +#if defined(DUAL_CORE) && defined(CORE_CM4) + __HAL_RCC_C2_LSECSS_EXTI_ENABLE_IT(); +#else + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); +#endif /* DUAL_CORE && CORE_CM4 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); +} + +/** + * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock + * @param WakeUpClk: Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI oscillator selection + * @note This function shall not be called after the Clock Security System on HSE has been + * enabled. + * @retval None + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Configure the oscillator Kernel clock source for wakeup from Stop + * @param WakeUpClk: Kernel Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI oscillator selection + * @retval None + */ +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_KERWAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable COREx boot independently of CMx_B option byte value + * @param RCC_BootCx: Boot Core to be enabled + * This parameter can be one of the following values: + * @arg RCC_BOOT_C1: CM7 core selection + * @arg RCC_BOOT_C2: CM4 core selection + * @note This bit can be set by software but is cleared by hardware after a system reset or STANDBY + * + * @retval None + */ +void HAL_RCCEx_EnableBootCore(uint32_t RCC_BootCx) +{ + assert_param(IS_RCC_BOOT_CORE(RCC_BootCx)); + SET_BIT(RCC->GCR, RCC_BootCx) ; +} + +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** + * @brief Configure WWDGx to generate a system reset not only CPUx reset(default) when a time-out occurs + * @param RCC_WWDGx: WWDGx to be configured + * This parameter can be one of the following values: + * @arg RCC_WWDG1: WWDG1 generates system reset + * @arg RCC_WWDG2: WWDG2 generates system reset + * @note This bit can be set by software but is cleared by hardware during a system reset + * + * @retval None + */ +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx) +{ + assert_param(IS_RCC_SCOPE_WWDG(RCC_WWDGx)); + SET_BIT(RCC->GCR, RCC_WWDGx) ; +} + +#else +#if defined(RCC_GCR_WW1RSC) +/** + * @brief Configure WWDG1 to generate a system reset not only CPU reset(default) when a time-out occurs + * @param RCC_WWDGx: WWDGx to be configured + * This parameter can be one of the following values: + * @arg RCC_WWDG1: WWDG1 generates system reset + * @note This bit can be set by software but is cleared by hardware during a system reset + * + * @retval None + */ +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx) +{ + assert_param(IS_RCC_SCOPE_WWDG(RCC_WWDGx)); + SET_BIT(RCC->GCR, RCC_WWDGx) ; +} +#endif +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the down-counting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the up-counting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(const RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Pre-scaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + if ((HAL_GetREVID() <= REV_ID_Y) && (pInit->Source == RCC_CRS_SYNC_SOURCE_USB2)) + { + /* Use Rev.Y value of USB2 */ + value = (pInit->Prescaler | RCC_CRS_SYNC_SOURCE_PIN | pInit->Polarity); + } + else + { + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + } + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the time-out +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Time-out set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or time-out detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } + while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCCEx_Private_functions RCCEx Private Functions + * @{ + */ +/** + * @brief Configure the PLL2 VCI,VCO ranges, multiplication and division factors and enable it + * @param pll2: Pointer to an RCC_PLL2InitTypeDef structure that + * contains the configuration parameters as well as VCI, VCO clock ranges. + * @param Divider divider parameter to be updated + * @note PLL2 is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLL2_Config(const RCC_PLL2InitTypeDef *pll2, uint32_t Divider) +{ + + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_RCC_PLL2M_VALUE(pll2->PLL2M)); + assert_param(IS_RCC_PLL2N_VALUE(pll2->PLL2N)); + assert_param(IS_RCC_PLL2P_VALUE(pll2->PLL2P)); + assert_param(IS_RCC_PLL2R_VALUE(pll2->PLL2R)); + assert_param(IS_RCC_PLL2Q_VALUE(pll2->PLL2Q)); + assert_param(IS_RCC_PLL2RGE_VALUE(pll2->PLL2RGE)); + assert_param(IS_RCC_PLL2VCO_VALUE(pll2->PLL2VCOSEL)); + assert_param(IS_RCC_PLLFRACN_VALUE(pll2->PLL2FRACN)); + + /* Check that PLL2 OSC clock source is already set */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_NONE) + { + return HAL_ERROR; + } + + + else + { + /* Disable PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure PLL2 multiplication and division factors. */ + __HAL_RCC_PLL2_CONFIG(pll2->PLL2M, + pll2->PLL2N, + pll2->PLL2P, + pll2->PLL2Q, + pll2->PLL2R); + + /* Select PLL2 input reference frequency range: VCI */ + __HAL_RCC_PLL2_VCIRANGE(pll2->PLL2RGE) ; + + /* Select PLL2 output frequency range : VCO */ + __HAL_RCC_PLL2_VCORANGE(pll2->PLL2VCOSEL) ; + + /* Disable PLL2FRACN . */ + __HAL_RCC_PLL2FRACN_DISABLE(); + + /* Configures PLL2 clock Fractional Part Of The Multiplication Factor */ + __HAL_RCC_PLL2FRACN_CONFIG(pll2->PLL2FRACN); + + /* Enable PLL2FRACN . */ + __HAL_RCC_PLL2FRACN_ENABLE(); + + /* Enable the PLL2 clock output */ + if (Divider == DIVIDER_P_UPDATE) + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVP); + } + else if (Divider == DIVIDER_Q_UPDATE) + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVQ); + } + else + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVR); + } + + /* Enable PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + + return status; +} + + +/** + * @brief Configure the PLL3 VCI,VCO ranges, multiplication and division factors and enable it + * @param pll3: Pointer to an RCC_PLL3InitTypeDef structure that + * contains the configuration parameters as well as VCI, VCO clock ranges. + * @param Divider divider parameter to be updated + * @note PLL3 is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLL3_Config(const RCC_PLL3InitTypeDef *pll3, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_RCC_PLL3M_VALUE(pll3->PLL3M)); + assert_param(IS_RCC_PLL3N_VALUE(pll3->PLL3N)); + assert_param(IS_RCC_PLL3P_VALUE(pll3->PLL3P)); + assert_param(IS_RCC_PLL3R_VALUE(pll3->PLL3R)); + assert_param(IS_RCC_PLL3Q_VALUE(pll3->PLL3Q)); + assert_param(IS_RCC_PLL3RGE_VALUE(pll3->PLL3RGE)); + assert_param(IS_RCC_PLL3VCO_VALUE(pll3->PLL3VCOSEL)); + assert_param(IS_RCC_PLLFRACN_VALUE(pll3->PLL3FRACN)); + + /* Check that PLL3 OSC clock source is already set */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_NONE) + { + return HAL_ERROR; + } + + + else + { + /* Disable PLL3. */ + __HAL_RCC_PLL3_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + /* Wait till PLL3 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL3RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL3_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the PLL3 multiplication and division factors. */ + __HAL_RCC_PLL3_CONFIG(pll3->PLL3M, + pll3->PLL3N, + pll3->PLL3P, + pll3->PLL3Q, + pll3->PLL3R); + + /* Select PLL3 input reference frequency range: VCI */ + __HAL_RCC_PLL3_VCIRANGE(pll3->PLL3RGE) ; + + /* Select PLL3 output frequency range : VCO */ + __HAL_RCC_PLL3_VCORANGE(pll3->PLL3VCOSEL) ; + + /* Disable PLL3FRACN . */ + __HAL_RCC_PLL3FRACN_DISABLE(); + + /* Configures PLL3 clock Fractional Part Of The Multiplication Factor */ + __HAL_RCC_PLL3FRACN_CONFIG(pll3->PLL3FRACN); + + /* Enable PLL3FRACN . */ + __HAL_RCC_PLL3FRACN_ENABLE(); + + /* Enable the PLL3 clock output */ + if (Divider == DIVIDER_P_UPDATE) + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVP); + } + else if (Divider == DIVIDER_Q_UPDATE) + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVQ); + } + else + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVR); + } + + /* Enable PLL3. */ + __HAL_RCC_PLL3_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL3 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL3RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL3_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + + return status; +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} + + + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ +