Index: ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h =================================================================== --- ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h (revision 37) +++ ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h (revision 37) @@ -0,0 +1,809 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PWR_H +#define STM32H7xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This + parameter can be a value of @ref + PWR_PVD_detection_level. + */ + + uint32_t Mode; /*!< Mode: Specifies the EXTI operating mode for the PVD + event. This parameter can be a value of @ref + PWR_PVD_Mode. + */ +}PWR_PVDTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Programmable voltage detector + level 0 selection : 1V95 */ +#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Programmable voltage detector + level 1 selection : 2V1 */ +#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Programmable voltage detector + level 2 selection : 2V25 */ +#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Programmable voltage detector + level 3 selection : 2V4 */ +#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Programmable voltage detector + level 4 selection : 2V55 */ +#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Programmable voltage detector + level 5 selection : 2V7 */ +#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Programmable voltage detector + level 6 selection : 2V85 */ +#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External input analog voltage + (Compare internally to VREF) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0U) +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI (0x01U) +#define PWR_SLEEPENTRY_WFE (0x02U) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI (0x01U) +#define PWR_STOPENTRY_WFE (0x02U) +/** + * @} + */ + +/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale + * @{ + */ +#if defined(PWR_SRDCR_VOS) +#define PWR_REGULATOR_VOLTAGE_SCALE0 (PWR_SRDCR_VOS_1 | PWR_SRDCR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_SRDCR_VOS_1) +#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_SRDCR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE3 (0U) +#else +#define PWR_REGULATOR_VOLTAGE_SCALE0 (0U) +#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_D3CR_VOS_1 | PWR_D3CR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_D3CR_VOS_1) +#define PWR_REGULATOR_VOLTAGE_SCALE3 (PWR_D3CR_VOS_0) +#endif /* PWR_SRDCR_VOS */ +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Flag + * @{ + */ +/* PWR CPU flag */ +#define PWR_FLAG_STOP (0x01U) +#if defined (PWR_CPUCR_SBF_D2) +#define PWR_FLAG_SB_D1 (0x02U) +#define PWR_FLAG_SB_D2 (0x03U) +#endif /* defined (PWR_CPUCR_SBF_D2) */ +#define PWR_FLAG_SB (0x04U) +#if defined (DUAL_CORE) +#define PWR_FLAG_CPU_HOLD (0x05U) +#define PWR_FLAG_CPU2_HOLD (0x06U) +#define PWR_FLAG2_STOP (0x07U) +#define PWR_FLAG2_SB_D1 (0x08U) +#define PWR_FLAG2_SB_D2 (0x09U) +#define PWR_FLAG2_SB (0x0AU) +#endif /* defined (DUAL_CORE) */ +#define PWR_FLAG_PVDO (0x0BU) +#define PWR_FLAG_AVDO (0x0CU) +#define PWR_FLAG_ACTVOSRDY (0x0DU) +#define PWR_FLAG_ACTVOS (0x0EU) +#define PWR_FLAG_BRR (0x0FU) +#define PWR_FLAG_VOSRDY (0x10U) +#if defined (SMPS) +#define PWR_FLAG_SMPSEXTRDY (0x11U) +#else +#define PWR_FLAG_SCUEN (0x11U) +#endif /* defined (SMPS) */ +#if defined (PWR_CSR1_MMCVDO) +#define PWR_FLAG_MMCVDO (0x12U) +#endif /* defined (PWR_CSR1_MMCVDO) */ +#define PWR_FLAG_USB33RDY (0x13U) +#define PWR_FLAG_TEMPH (0x14U) +#define PWR_FLAG_TEMPL (0x15U) +#define PWR_FLAG_VBATH (0x16U) +#define PWR_FLAG_VBATL (0x17U) + +/* PWR Wake up flag */ +#define PWR_FLAG_WKUP1 PWR_WKUPCR_WKUPC1 +#define PWR_FLAG_WKUP2 PWR_WKUPCR_WKUPC2 +#define PWR_FLAG_WKUP3 PWR_WKUPCR_WKUPC3 +#define PWR_FLAG_WKUP4 PWR_WKUPCR_WKUPC4 +#define PWR_FLAG_WKUP5 PWR_WKUPCR_WKUPC5 +#define PWR_FLAG_WKUP6 PWR_WKUPCR_WKUPC6 +/** + * @} + */ + +/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask + * @{ + */ +#define PWR_EWUP_MASK (0x0FFF3F3FU) +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Configure the main internal regulator output voltage. + * @param __REGULATOR__ : Specifies the regulator output voltage to achieve a + * trade-off between performance and power consumption + * when the device does not operate at the maximum + * frequency (refer to the datasheet for more details). + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output + * Scale 0 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output + * Scale 1 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output + * Scale 2 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output + * Scale 3 mode. + * @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is + * only possible when Vcore is supplied from LDO (Low DropOut). The + * SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE() + * macro before configuring Voltage Scale 0 using + * __HAL_PWR_VOLTAGESCALING_CONFIG(). + * Transition to Voltage Scale 0 is only possible when the system is + * already in Voltage Scale 1. + * Transition from Voltage Scale 0 is only possible to Voltage Scale 1 + * then once in Voltage Scale 1 it is possible to switch to another + * voltage scale. + * After each regulator voltage setting, wait on VOSRDY flag to be set + * using macro __HAL_PWR_GET_FLAG(). + * To enter low power mode , and if current regulator voltage is + * Voltage Scale 0 then first switch to Voltage Scale 1 before entering + * low power mode. + * @retval None. + */ +#if defined (PWR_SRDCR_VOS) /* STM32H7Axxx and STM32H7Bxxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Configure the Voltage Scaling */ \ + MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS); \ + UNUSED(tmpreg); \ +} while(0) +#else /* 3 power domains devices */ +#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Check the voltage scaling to be configured */ \ + if((__REGULATOR__) == PWR_REGULATOR_VOLTAGE_SCALE0) \ + { \ + /* Configure the Voltage Scaling 1 */ \ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + /* Enable the PWR overdrive */ \ + SET_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Delay after setting the syscfg boost setting */ \ + tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + } \ + else \ + { \ + /* Disable the PWR overdrive */ \ + CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Delay after setting the syscfg boost setting */ \ + tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Configure the Voltage Scaling x */ \ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + } \ + UNUSED(tmpreg); \ +} while(0) +#else /* STM32H72xxx and STM32H73xxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Configure the Voltage Scaling */ \ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + UNUSED(tmpreg); \ +} while(0) +#endif /* defined(SYSCFG_PWRCR_ODEN) */ +#endif /* defined (PWR_SRDCR_VOS) */ + +/** @brief Check PWR flags are set or not. + * @param __FLAG__ : Specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_PVDO : PVD Output. This flag is valid only if PVD + * is enabled by the HAL_PWR_EnablePVD() + * function. + * The PVD is stopped by STANDBY mode. For this + * reason, this bit is equal to 0 after STANDBY + * or reset until the PVDE bit is set. + * @arg PWR_FLAG_AVDO : AVD Output. This flag is valid only if AVD + * is enabled by the HAL_PWREx_EnableAVD() + * function. The AVD is stopped by STANDBY mode. + * For this reason, this bit is equal to 0 + * after STANDBY or reset until the AVDE bit + * is set. + * @arg PWR_FLAG_ACTVOSRDY : This flag indicates that the Regulator + * voltage scaling output selection is + * ready. + * @arg PWR_FLAG_BRR : Backup regulator ready flag. This bit is not + * reset when the device wakes up from STANDBY + * mode or by a system reset or power-on reset. + * @arg PWR_FLAG_VOSRDY : This flag indicates that the Regulator + * voltage scaling output selection is ready. + * mode or by a system reset or power-on reset. + * @arg PWR_FLAG_USB33RDY : This flag indicates that the USB supply + * from regulator is ready. + * @arg PWR_FLAG_TEMPH : This flag indicates that the temperature + * equal or above high threshold level. + * @arg PWR_FLAG_TEMPL : This flag indicates that the temperature + * equal or below low threshold level. + * @arg PWR_FLAG_VBATH : This flag indicates that VBAT level equal + * or above high threshold level. + * @arg PWR_FLAG_VBATL : This flag indicates that VBAT level equal + * or below low threshold level. + * @arg PWR_FLAG_STOP : This flag indicates that the system entered + * in STOP mode. + * @arg PWR_FLAG_SB : This flag indicates that the system entered in + * STANDBY mode. + * @arg PWR_FLAG_SB_D1 : This flag indicates that the D1 domain + * entered in STANDBY mode. + * @arg PWR_FLAG_SB_D2 : This flag indicates that the D2 domain + * entered in STANDBY mode. + * @arg PWR_FLAG2_STOP : This flag indicates that the system entered + * in STOP mode. + * @arg PWR_FLAG2_SB : This flag indicates that the system entered + * in STANDBY mode. + * @arg PWR_FLAG2_SB_D1 : This flag indicates that the D1 domain + * entered in STANDBY mode. + * @arg PWR_FLAG2_SB_D2 : This flag indicates that the D2 domain + * entered in STANDBY mode. + * @arg PWR_FLAG_CPU_HOLD : This flag indicates that the CPU1 wakes + * up with hold. + * @arg PWR_FLAG_CPU2_HOLD : This flag indicates that the CPU2 wakes + * up with hold. + * @arg PWR_FLAG_SMPSEXTRDY : This flag indicates that the SMPS + * External supply is sready. + * @arg PWR_FLAG_SCUEN : This flag indicates that the supply + * configuration update is enabled. + * @arg PWR_FLAG_MMCVDO : This flag indicates that the VDDMMC is + * above or equal to 1.2 V. + * @note The PWR_FLAG_PVDO, PWR_FLAG_AVDO, PWR_FLAG_ACTVOSRDY, PWR_FLAG_BRR, + * PWR_FLAG_VOSRDY, PWR_FLAG_USB33RDY, PWR_FLAG_TEMPH, PWR_FLAG_TEMPL, + * PWR_FLAG_VBATH, PWR_FLAG_VBATL, PWR_FLAG_STOP and PWR_FLAG_SB flags + * are used for all H7 family lines. + * The PWR_FLAG2_STOP, PWR_FLAG2_SB, PWR_FLAG2_SB_D1, PWR_FLAG2_SB_D2, + * PWR_FLAG_CPU_HOLD and PWR_FLAG_CPU2_HOLD flags are used only for H7 + * dual core lines. + * The PWR_FLAG_SB_D1 and PWR_FLAG_SB_D2 flags are used for all H7 + * family except STM32H7Axxx and STM32H7Bxxx lines. + * The PWR_FLAG_MMCVDO flag is used only for STM32H7Axxx and + * STM32H7Bxxx lines. + * The PWR_FLAG_SCUEN flag is used for devices that support only LDO + * regulator. + * The PWR_FLAG_SMPSEXTRDY flag is used for devices that support LDO + * and SMPS regulators. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#if defined (DUAL_CORE) /* Dual core lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_CPU_HOLD) ? ((PWR->CPU2CR & PWR_CPU2CR_HOLD1F) == PWR_CPU2CR_HOLD1F) :\ + ((__FLAG__) == PWR_FLAG_CPU2_HOLD) ? ((PWR->CPUCR & PWR_CPUCR_HOLD2F) == PWR_CPUCR_HOLD2F) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG2_SB) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF) == PWR_CPU2CR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG2_STOP) ? ((PWR->CPU2CR & PWR_CPU2CR_STOPF) == PWR_CPU2CR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG2_SB_D1) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D1) == PWR_CPU2CR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG2_SB_D2) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D2) == PWR_CPU2CR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* Single core lines */ +#if defined (PWR_CPUCR_SBF_D2) /* STM32H72x, STM32H73x, STM32H74x and STM32H75x lines */ +#if defined (SMPS) /* STM32H725 and STM32H735 lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_FLAG_SMPSEXTRDY) == PWR_FLAG_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* STM32H723, STM32H733, STM32H742, STM32H743, STM32H750 and STM32H753 lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#endif /* defined (SMPS) */ +#else /* STM32H7Axxx and STM32H7Bxxx lines */ +#if defined (SMPS) /* STM32H7AxxQ and STM32H7BxxQ lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* STM32H7Axx and STM32H7Bxx lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#endif /* SMPS */ +#endif /* PWR_CPUCR_SBF_D2 */ +#endif /* DUAL_CORE */ + +/** @brief Check PWR wake up flags are set or not. + * @param __FLAG__: specifies the wake up flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag. + * @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag. + * @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag. + * @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices + * that support GPIOI port. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#define __HAL_PWR_GET_WAKEUPFLAG(__FLAG__) ((PWR->WKUPFR & (__FLAG__)) ? 0 : 1) + +#if defined (DUAL_CORE) +/** @brief Clear CPU PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with other families. + * @note This macro clear all CPU flags STOPF, SBF, SBF_D1, and SBF_D2. + * This parameter can be one of the following values : + * @arg PWR_CPU_FLAGS : Clear HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2 + * CPU flags. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) \ +do { \ + SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); \ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); \ +} while(0) +#else +/** @brief Clear CPU PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with other families. + * @note This macro clear all CPU flags. + * For single core devices except STM32H7Axxx and STM32H7Bxxx, CPU + * flags are STOPF, SBF, SBF_D1 and SBF_D2. + * For STM32H7Axxx and STM32H7Bxxx lines, CPU flags are STOPF and SBF. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF) +#endif /* defined (DUAL_CORE) */ + +/** @brief Clear PWR wake up flags. + * @param __FLAG__ : Specifies the wake up flag to be cleared. + * This parameter can be one of the following values : + * @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag. + * @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag. + * @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag. + * @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices + * that support GPIOI port. + * @retval None. + */ +#define __HAL_PWR_CLEAR_WAKEUPFLAG(__FLAG__) SET_BIT(PWR->WKUPCR, (__FLAG__)) + +/** + * @brief Enable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable the PVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable the PVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable event on PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable event on PVD EXTI D2 Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable event on PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable event on PVD EXTI D2 Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable the PVD Rising Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Rising Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Rising & Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Disable the PVD Rising & Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) + +#if defined (DUAL_CORE) +/** + * @brief Checks whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI D2 PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Clear the PVD EXTI D2 flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Generates a Software interrupt on PVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32h7xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit (void); +void HAL_PWR_EnableBkUpAccess (void); +void HAL_PWR_DisableBkUpAccess (void); +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @{ + */ +/* Peripheral Control functions **********************************************/ +/* PVD configuration */ +void HAL_PWR_ConfigPVD (const PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD (void); +void HAL_PWR_DisablePVD (void); + +/* WakeUp pins configuration */ +void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx); + +/* Low Power modes entry */ +void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode (void); + +/* Power PVD IRQ Handler */ +void HAL_PWR_PVD_IRQHandler (void); +void HAL_PWR_PVDCallback (void); + +/* Cortex System Control functions *******************************************/ +void HAL_PWR_EnableSleepOnExit (void); +void HAL_PWR_DisableSleepOnExit (void); +void HAL_PWR_EnableSEVOnPend (void); +void HAL_PWR_DisableSEVOnPend (void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line + * @{ + */ +#define PWR_EXTI_LINE_PVD EXTI_IMR1_IM16 /*!< External interrupt line 16 + Connected to the PVD EXTI Line */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters + * @{ + */ +/* Check PVD level parameter */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) ||\ + ((LEVEL) == PWR_PVDLEVEL_1) ||\ + ((LEVEL) == PWR_PVDLEVEL_2) ||\ + ((LEVEL) == PWR_PVDLEVEL_3) ||\ + ((LEVEL) == PWR_PVDLEVEL_4) ||\ + ((LEVEL) == PWR_PVDLEVEL_5) ||\ + ((LEVEL) == PWR_PVDLEVEL_6) ||\ + ((LEVEL) == PWR_PVDLEVEL_7)) + +/* Check PVD mode parameter */ +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +/* Check low power regulator parameter */ +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) ||\ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +/* Check low power mode entry parameter */ +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) ||\ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +/* Check low power mode entry parameter */ +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) ||\ + ((ENTRY) == PWR_STOPENTRY_WFE)) + +/* Check voltage scale level parameter */ +#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE0) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32H7xx_HAL_PWR_H */ +