Index: /ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h =================================================================== --- /ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h (revision 25) +++ /ctrl/firmware/Main/CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h (revision 25) @@ -0,0 +1,4482 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_RCC_EX_H +#define STM32H7xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief PLL2 Clock structure definition + */ +typedef struct +{ + + uint32_t PLL2M; /*!< PLL2M: Division factor for PLL2 VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 63 */ + + uint32_t PLL2N; /*!< PLL2N: Multiplication factor for PLL2 VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + or between Min_Data = 8 and Max_Data = 420(*) + (*) : For stm32h7a3xx and stm32h7b3xx family lines. */ + + uint32_t PLL2P; /*!< PLL2P: Division factor for system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed */ + + uint32_t PLL2Q; /*!< PLL2Q: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLL2R; /*!< PLL2R: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + uint32_t PLL2RGE; /*!CR, RCC_CR_PLL2ON) +#define __HAL_RCC_PLL2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON) + +/** + * @brief Enables or disables each clock output (PLL2_P_CLK, PLL2_Q_CLK, PLL2_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL2 is disabled, + * This is mainly used to save Power. + * @param __RCC_PLL2ClockOut__ Specifies the PLL2 clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL2_DIVP: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL2_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL2_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2CLKOUT_ENABLE(__RCC_PLL2ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL2ClockOut__)) + +#define __HAL_RCC_PLL2CLKOUT_DISABLE(__RCC_PLL2ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL2ClockOut__)) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL2 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL2 + * @retval None + */ +#define __HAL_RCC_PLL2FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +#define __HAL_RCC_PLL2FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +/** + * @brief Macro to configures the PLL2 multiplication and division factors. + * @note This function must be used only when PLL2 is disabled. + * + * @param __PLL2M__ specifies the division factor for PLL2 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL2N__ specifies the multiplication factor for PLL2 VCO output clock + * This parameter must be a number between 4 and 512 or between 8 and 420(*). + * @note You have to set the PLL2N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL2P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL2P__, __PLL2Q__ or __PLL2R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + */ + +#define __HAL_RCC_PLL2_CONFIG(__PLL2M__, __PLL2N__, __PLL2P__, __PLL2Q__,__PLL2R__ ) \ + do{ \ + MODIFY_REG(RCC->PLLCKSELR, ( RCC_PLLCKSELR_DIVM2) , ( (__PLL2M__) <<12U)); \ + WRITE_REG (RCC->PLL2DIVR , ( (((__PLL2N__) - 1U ) & RCC_PLL2DIVR_N2) | ((((__PLL2P__) -1U ) << 9U) & RCC_PLL2DIVR_P2) | \ + ((((__PLL2Q__) -1U) << 16U) & RCC_PLL2DIVR_Q2) | ((((__PLL2R__)- 1U) << 24U) & RCC_PLL2DIVR_R2))); \ + } while(0) + +/** + * @brief Macro to configures PLL2 clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL2 VCO + * + * @param __RCC_PLL2FRACN__ Specifies Fractional Part Of The Multiplication factor for PLL2 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL2VCOSEL = 0 + * 150 to 420 MHz if PLL2VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2FRACN_CONFIG(__RCC_PLL2FRACN__) \ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2,((uint32_t)(__RCC_PLL2FRACN__) << RCC_PLL2FRACR_FRACN2_Pos)) + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __RCC_PLL2VCIRange__ specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL2VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL2VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL2VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL2VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL2_VCIRANGE(__RCC_PLL2VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, (__RCC_PLL2VCIRange__)) + + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __RCC_PLL2VCORange__ Specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL2VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL2VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2_VCORANGE(__RCC_PLL2VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, (__RCC_PLL2VCORange__)) + +/** @brief Macros to enable or disable the main PLL3. + * @note After enabling PLL3, the application software should wait on + * PLL3RDY flag to be set indicating that PLL3 clock is stable and can + * be used as kernel clock source. + * @note PLL3 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL3_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL3ON) +#define __HAL_RCC_PLL3_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL3 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL3 + * @retval None + */ +#define __HAL_RCC_PLL3FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +#define __HAL_RCC_PLL3FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +/** + * @brief Enables or disables each clock output (PLL3_P_CLK, PLL3_Q_CLK, PLL3_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL3 is disabled, + * This is mainly used to save Power. + * @param __RCC_PLL3ClockOut__ specifies the PLL3 clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL3_DIVP: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL3_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL3_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3CLKOUT_ENABLE(__RCC_PLL3ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL3ClockOut__)) + +#define __HAL_RCC_PLL3CLKOUT_DISABLE(__RCC_PLL3ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL3ClockOut__)) + +/** + * @brief Macro to configures the PLL3 multiplication and division factors. + * @note This function must be used only when PLL3 is disabled. + * + * @param __PLL3M__ specifies the division factor for PLL3 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL3N__ specifies the multiplication factor for PLL3 VCO output clock + * This parameter must be a number between 4 and 512. + * @note You have to set the PLL3N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL3P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 2 and 128 (where odd numbers not allowed) + * + * @param __PLL3Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL3R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL3P__, __PLL3Q__ or __PLL3R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + */ + +#define __HAL_RCC_PLL3_CONFIG(__PLL3M__, __PLL3N__, __PLL3P__, __PLL3Q__,__PLL3R__ ) \ + do{ MODIFY_REG(RCC->PLLCKSELR, ( RCC_PLLCKSELR_DIVM3) , ( (__PLL3M__) <<20U)); \ + WRITE_REG (RCC->PLL3DIVR , ( (((__PLL3N__) - 1U ) & RCC_PLL3DIVR_N3) | ((((__PLL3P__) -1U ) << 9U) & RCC_PLL3DIVR_P3) | \ + ((((__PLL3Q__) -1U) << 16U) & RCC_PLL3DIVR_Q3) | ((((__PLL3R__) - 1U) << 24U) & RCC_PLL3DIVR_R3))); \ + } while(0) + + + +/** + * @brief Macro to configures PLL3 clock Fractional Part of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL3 VCO + * + * @param __RCC_PLL3FRACN__ specifies Fractional Part Of The Multiplication Factor for PLL3 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL3VCOSEL = 0 + * 150 to 420 MHz if PLL3VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3FRACN_CONFIG(__RCC_PLL3FRACN__) MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3, (uint32_t)(__RCC_PLL3FRACN__) << RCC_PLL3FRACR_FRACN3_Pos) + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __RCC_PLL3VCIRange__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL3VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL3VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL3VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL3VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL3_VCIRANGE(__RCC_PLL3VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, (__RCC_PLL3VCIRange__)) + + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __RCC_PLL3VCORange__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL3VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL3VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3_VCORANGE(__RCC_PLL3VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, (__RCC_PLL3VCORange__)) +/** + * @brief Macro to Configure the SAI1 clock source. + * @param __RCC_SAI1CLKSource__ defines the SAI1 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL: SAI1 clock = PLL + * @arg RCC_SAI1CLKSOURCE_PLL2: SAI1 clock = PLL2 + * @arg RCC_SAI1CLKSOURCE_PLL3: SAI1 clock = PLL3 + * @arg RCC_SAI1CLKSOURCE_OSC: SAI1 clock = OSC + * @arg RCC_SAI1CLKSOURCE_PIN: SAI1 clock = External Clock + * @retval None + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define __HAL_RCC_SAI1_CONFIG(__RCC_SAI1CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI1SEL, (__RCC_SAI1CLKSource__)) +#else +#define __HAL_RCC_SAI1_CONFIG(__RCC_SAI1CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI1SEL, (__RCC_SAI1CLKSource__)) +#endif /* RCC_D2CCIP1R_SAI1SEL */ + +/** @brief Macro to get the SAI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL: SAI1 clock = PLL + * @arg RCC_SAI1CLKSOURCE_PLL2: SAI1 clock = PLL2 + * @arg RCC_SAI1CLKSOURCE_PLL3: SAI1 clock = PLL3 + * @arg RCC_SAI1CLKSOURCE_CLKP: SAI1 clock = CLKP + * @arg RCC_SAI1CLKSOURCE_PIN: SAI1 clock = External Clock + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI1SEL))) +#else +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI1SEL))) +#endif /* RCC_D2CCIP1R_SAI1SEL */ + +/** + * @brief Macro to Configure the SPDIFRX clock source. + * @param __RCC_SPDIFCLKSource__ defines the SPDIFRX clock source. This clock is derived + * from system PLL, PLL2, PLL3, or internal OSC clock + * This parameter can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLL: SPDIFRX clock = PLL + * @arg RCC_SPDIFRXCLKSOURCE_PLL2: SPDIFRX clock = PLL2 + * @arg RCC_SPDIFRXCLKSOURCE_PLL3: SPDIFRX clock = PLL3 + * @arg RCC_SPDIFRXCLKSOURCE_HSI: SPDIFRX clock = HSI + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define __HAL_RCC_SPDIFRX_CONFIG(__RCC_SPDIFCLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL, (__RCC_SPDIFCLKSource__)) +#else +#define __HAL_RCC_SPDIFRX_CONFIG(__RCC_SPDIFCLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL, (__RCC_SPDIFCLKSource__)) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ + +/** + * @brief Macro to get the SPDIFRX clock source. + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL))) +#else +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL))) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ + +#if defined(SAI3) +/** + * @brief Macro to Configure the SAI2/3 clock source. + * @param __RCC_SAI23CLKSource__ defines the SAI2/3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI23CLKSOURCE_PLL: SAI2/3 clock = PLL + * @arg RCC_SAI23CLKSOURCE_PLL2: SAI2/3 clock = PLL2 + * @arg RCC_SAI23CLKSOURCE_PLL3: SAI2/3 clock = PLL3 + * @arg RCC_SAI23CLKSOURCE_CLKP: SAI2/3 clock = CLKP + * @arg RCC_SAI23CLKSOURCE_PIN: SAI2/3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI23_CONFIG(__RCC_SAI23CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI23SEL, (__RCC_SAI23CLKSource__)) + +/** @brief Macro to get the SAI2/3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI23CLKSOURCE_PLL: SAI2/3 clock = PLL + * @arg RCC_SAI23CLKSOURCE_PLL2: SAI2/3 clock = PLL2 + * @arg RCC_SAI23CLKSOURCE_PLL3: SAI2/3 clock = PLL3 + * @arg RCC_SAI23CLKSOURCE_CLKP: SAI2/3 clock = CLKP + * @arg RCC_SAI23CLKSOURCE_PIN: SAI2/3 clock = External Clock + */ +#define __HAL_RCC_GET_SAI23_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI23SEL))) + +/** + * @brief Macro to Configure the SAI2 clock source. + * @param __RCC_SAI2CLKSource__ defines the SAI2 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2 clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2 clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2 clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2 clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI2_CONFIG __HAL_RCC_SAI23_CONFIG + +/** @brief Macro to get the SAI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2 clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2 clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2 clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2 clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2 clock = External Clock + */ +#define __HAL_RCC_GET_SAI2_SOURCE __HAL_RCC_GET_SAI23_SOURCE + +/** + * @brief Macro to Configure the SAI3 clock source. + * @param __RCC_SAI3CLKSource__ defines the SAI3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI3CLKSOURCE_PLL: SAI3 clock = PLL + * @arg RCC_SAI3CLKSOURCE_PLL2: SAI3 clock = PLL2 + * @arg RCC_SAI3CLKSOURCE_PLL3: SAI3 clock = PLL3 + * @arg RCC_SAI3CLKSOURCE_CLKP: SAI3 clock = CLKP + * @arg RCC_SAI3CLKSOURCE_PIN: SAI3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI3_CONFIG __HAL_RCC_SAI23_CONFIG + +/** @brief Macro to get the SAI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI3CLKSOURCE_PLL: SAI3 clock = PLL + * @arg RCC_SAI3CLKSOURCE_PLL2: SAI3 clock = PLL2 + * @arg RCC_SAI3CLKSOURCE_PLL3: SAI3 clock = PLL3 + * @arg RCC_SAI3CLKSOURCE_CLKP: SAI3 clock = CLKP + * @arg RCC_SAI3CLKSOURCE_PIN: SAI3 clock = External Clock + */ +#define __HAL_RCC_GET_SAI3_SOURCE __HAL_RCC_GET_SAI23_SOURCE +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) +/** + * @brief Macro to Configure the SAI2A clock source. + * @param __RCC_SAI2ACLKSource__ defines the SAI2A clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2ACLKSOURCE_PLL: SAI2A clock = PLL + * @arg RCC_SAI2ACLKSOURCE_PLL2: SAI2A clock = PLL2 + * @arg RCC_SAI2ACLKSOURCE_PLL3: SAI2A clock = PLL3 + * @arg RCC_SAI2ACLKSOURCE_CLKP: SAI2A clock = CLKP + * @arg RCC_SAI2ACLKSOURCE_PIN: SAI2A clock = External Clock + * @arg RCC_SAI2ACLKSOURCE_SPDIF: SAI2A clock = SPDIF Clock + * @retval None + */ +#define __HAL_RCC_SAI2A_CONFIG(__RCC_SAI2ACLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2ASEL, (__RCC_SAI2ACLKSource__)) + +/** @brief Macro to get the SAI2A clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2A clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2A clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2A clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2A clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2A clock = External Clock + * @arg RCC_SAI2ACLKSOURCE_SPDIF: SAI2A clock = SPDIF Clock + */ +#define __HAL_RCC_GET_SAI2A_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2ASEL))) +#endif /* defined(RCC_CDCCIP1R_SAI2ASEL) */ + +#if defined(RCC_CDCCIP1R_SAI2BSEL) +/** + * @brief Macro to Configure the SAI2B clock source. + * @param __RCC_SAI2BCLKSource__ defines the SAI2B clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2BCLKSOURCE_PLL: SAI2B clock = PLL + * @arg RCC_SAI2BCLKSOURCE_PLL2: SAI2B clock = PLL2 + * @arg RCC_SAI2BCLKSOURCE_PLL3: SAI2B clock = PLL3 + * @arg RCC_SAI2BCLKSOURCE_CLKP: SAI2B clock = CLKP + * @arg RCC_SAI2BCLKSOURCE_PIN: SAI2B clock = External Clock + * @arg RCC_SAI2BCLKSOURCE_SPDIF: SAI2B clock = SPDIF Clock + * @retval None + */ +#define __HAL_RCC_SAI2B_CONFIG(__RCC_SAI2BCLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2BSEL, (__RCC_SAI2BCLKSource__)) + +/** @brief Macro to get the SAI2B clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2BCLKSOURCE_PLL: SAI2B clock = PLL + * @arg RCC_SAI2BCLKSOURCE_PLL2: SAI2B clock = PLL2 + * @arg RCC_SAI2BCLKSOURCE_PLL3: SAI2B clock = PLL3 + * @arg RCC_SAI2BCLKSOURCE_CLKP: SAI2B clock = CLKP + * @arg RCC_SAI2BCLKSOURCE_PIN: SAI2B clock = External Clock + * @arg RCC_SAI2BCLKSOURCE_SPDIF: SAI2B clock = SPDIF Clock + */ +#define __HAL_RCC_GET_SAI2B_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2BSEL))) +#endif /* defined(RCC_CDCCIP1R_SAI2BSEL) */ + + +#if defined(SAI4_Block_A) +/** + * @brief Macro to Configure the SAI4A clock source. + * @param __RCC_SAI4ACLKSource__ defines the SAI4A clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI4ACLKSOURCE_PLL: SAI4A clock = PLL + * @arg RCC_SAI4ACLKSOURCE_PLL2: SAI4A clock = PLL2 + * @arg RCC_SAI4ACLKSOURCE_PLL3: SAI4A clock = PLL3 + * @arg RCC_SAI4ACLKSOURCE_CLKP: SAI4A clock = CLKP + * @arg RCC_SAI4ACLKSOURCE_PIN: SAI4A clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI4A_CONFIG(__RCC_SAI4ACLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SAI4ASEL, (__RCC_SAI4ACLKSource__)) + +/** @brief Macro to get the SAI4A clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI4ACLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4ACLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4ACLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4ACLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4ACLKSOURCE_PIN: SAI4B clock = External Clock + */ +#define __HAL_RCC_GET_SAI4A_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SAI4ASEL))) +#endif /* SAI4_Block_A */ + +#if defined(SAI4_Block_B) +/** + * @brief Macro to Configure the SAI4B clock source. + * @param __RCC_SAI4BCLKSource__ defines the SAI4B clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI4BCLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4BCLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4BCLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4BCLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4BCLKSOURCE_PIN: SAI4B clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI4B_CONFIG(__RCC_SAI4BCLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SAI4BSEL, (__RCC_SAI4BCLKSource__)) + +/** @brief Macro to get the SAI4B clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI4BCLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4BCLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4BCLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4BCLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4BCLKSOURCE_PIN: SAI4B clock = External Clock + */ +#define __HAL_RCC_GET_SAI4B_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SAI4BSEL))) +#endif /* SAI4_Block_B */ + +/** @brief macro to configure the I2C1/2/3/5* clock (I2C123CLK). + * + * @param __I2C1235CLKSource__ specifies the I2C1/2/3/5* clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C123CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_PLL3: PLL3 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_HSI: HSI selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_CSI: CSI selected as I2C1/2/3/5* clock + * + * (**): Available on stm32h72xxx and stm32h73xxx family lines. + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define __HAL_RCC_I2C123_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C123SEL, (uint32_t)(__I2C1235CLKSource__)) +#elif defined(RCC_CDCCIP2R_I2C123SEL) +#define __HAL_RCC_I2C123_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_I2C123SEL, (uint32_t)(__I2C1235CLKSource__)) +#else /* RCC_D2CCIP2R_I2C1235SEL */ +#define __HAL_RCC_I2C1235_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C1235SEL, (uint32_t)(__I2C1235CLKSource__)) +/* alias */ +#define __HAL_RCC_I2C123_CONFIG __HAL_RCC_I2C1235_CONFIG +#endif /* RCC_D2CCIP2R_I2C123SEL */ + +/** @brief macro to get the I2C1/2/3/5* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C123CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_PLL3: PLL3 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_HSI: HSI selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_CSI: CSI selected as I2C1/2/3/5* clock + * + * (**): Available on stm32h72xxx and stm32h73xxx family lines. + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define __HAL_RCC_GET_I2C123_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C123SEL))) +#elif defined(RCC_CDCCIP2R_I2C123SEL) +#define __HAL_RCC_GET_I2C123_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_I2C123SEL))) +#else /* RCC_D2CCIP2R_I2C1235SEL */ +#define __HAL_RCC_GET_I2C1235_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C1235SEL))) +/* alias */ +#define __HAL_RCC_GET_I2C123_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#endif /* RCC_D2CCIP2R_I2C123SEL */ + +/** @brief macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1CLKSource__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C1CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_PLL3: PLL3 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_CSI: CSI selected as I2C1 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C1_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C1_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C1CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_PLL3: PLL3 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_CSI: CSI selected as I2C1 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C1_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C1_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2CLKSource__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C2CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_PLL3: PLL3 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_CSI: CSI selected as I2C2 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C2_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C2_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C2CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_PLL3: PLL3 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_CSI: CSI selected as I2C2 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C2_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C2_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C3 clock (I2C3CLK). + * + * @param __I2C3CLKSource__ specifies the I2C3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C3CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_PLL3: PLL3 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_CSI: CSI selected as I2C3 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C3_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C3_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C3CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_PLL3: PLL3 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_CSI: CSI selected as I2C3 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C3_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C3_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C4 clock (I2C4CLK). + * + * @param __I2C4CLKSource__ specifies the I2C4 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C4CLKSOURCE_D3PCLK1: D3PCLK1 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_PLL3: PLL3 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_CSI: CSI selected as I2C4 clock + */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define __HAL_RCC_I2C4_CONFIG(__I2C4CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_I2C4SEL, (uint32_t)(__I2C4CLKSource__)) +#else +#define __HAL_RCC_I2C4_CONFIG(__I2C4CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_I2C4SEL, (uint32_t)(__I2C4CLKSource__)) +#endif /* RCC_D3CCIPR_I2C4SEL */ + +/** @brief macro to get the I2C4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C4CLKSOURCE_D3PCLK1: D3PCLK1 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_PLL3: PLL3 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_CSI: CSI selected as I2C4 clock + */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_I2C4SEL))) +#else +#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_I2C4SEL))) +#endif /* RCC_D3CCIPR_I2C4SEL */ + +#if defined(I2C5) +/** @brief macro to configure the I2C5 clock (I2C5CLK). + * + * @param __I2C5CLKSource__ specifies the I2C5 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C5CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_PLL3: PLL3 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_HSI: HSI selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_CSI: CSI selected as I2C5 clock + */ +#define __HAL_RCC_I2C5_CONFIG __HAL_RCC_I2C1235_CONFIG +#endif /* I2C5 */ + +#if defined(I2C5) +/** @brief macro to get the I2C5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C5CLKSOURCE_D2PCLK1: D2PCLK5 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_PLL3: PLL3 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_HSI: HSI selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_CSI: CSI selected as I2C5 clock + */ +#define __HAL_RCC_GET_I2C5_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#endif /* I2C5 */ + +/** @brief macro to configure the USART1/6/9* /10* clock (USART16CLK). + * + * @param __USART16910CLKSource__ specifies the USART1/6/9* /10* clock source. + * This parameter can be one of the following values: + * @arg RCC_USART16CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_HSI: HSI selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_CSI: CSI Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_LSE: LSE selected as USART1/6/9* /10* clock + * + * (*) : Available on some STM32H7 lines only. + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define __HAL_RCC_USART16_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16SEL, (uint32_t)(__USART16910CLKSource__)) +#elif defined(RCC_CDCCIP2R_USART16910SEL) +#define __HAL_RCC_USART16910_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USART16910SEL, (uint32_t)(__USART16910CLKSource__)) +/* alias */ +#define __HAL_RCC_USART16_CONFIG __HAL_RCC_USART16910_CONFIG +#else /* RCC_D2CCIP2R_USART16910SEL */ +#define __HAL_RCC_USART16910_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16910SEL, (uint32_t)(__USART16910CLKSource__)) +/* alias */ +#define __HAL_RCC_USART16_CONFIG __HAL_RCC_USART16910_CONFIG +#endif /* RCC_D2CCIP2R_USART16SEL */ + +/** @brief macro to get the USART1/6/9* /10* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART16CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_HSI: HSI selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_CSI: CSI Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_LSE: LSE selected as USART1/6/9* /10* clock + * + * (*) : Available on some STM32H7 lines only. + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define __HAL_RCC_GET_USART16_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16SEL))) +#elif defined(RCC_CDCCIP2R_USART16910SEL) +#define __HAL_RCC_GET_USART16910_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USART16910SEL))) +/* alias*/ +#define __HAL_RCC_GET_USART16_SOURCE __HAL_RCC_GET_USART16910_SOURCE +#else /* RCC_D2CCIP2R_USART16910SEL */ +#define __HAL_RCC_GET_USART16910_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16910SEL))) +/* alias */ +#define __HAL_RCC_GET_USART16_SOURCE __HAL_RCC_GET_USART16910_SOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ + +/** @brief macro to configure the USART234578 clock (USART234578CLK). + * + * @param __USART234578CLKSource__ specifies the USART2/3/4/5/7/8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_HSI: HSI selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_CSI: CSI Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_LSE: LSE selected as USART2/3/4/5/7/8 clock + */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define __HAL_RCC_USART234578_CONFIG(__USART234578CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART28SEL, (uint32_t)(__USART234578CLKSource__)) +#else +#define __HAL_RCC_USART234578_CONFIG(__USART234578CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USART234578SEL, (uint32_t)(__USART234578CLKSource__)) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +/** @brief macro to get the USART2/3/4/5/7/8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_HSI: HSI selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_CSI: CSI Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_LSE: LSE selected as USART2/3/4/5/7/8 clock + */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART28SEL))) +#else +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USART234578SEL))) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +/** @brief macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1CLKSource__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART1CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI: CSI Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART1CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI: CSI Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE __HAL_RCC_GET_USART16_SOURCE + +/** @brief macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2CLKSource__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_CSI: CSI Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_CSI: CSI Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3CLKSource__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART3CLKSOURCE_D2PCLK1: APB1 Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL2: PLL2_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL3: PLL3_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_CSI: CSI Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL2: PLL2_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL3: PLL3_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_CSI: CSI Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART4 clock (UART4CLK). + * + * @param __UART4CLKSource__ specifies the UART4 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART4CLKSOURCE_D2PCLK1: APB1 Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL2: PLL2_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL3: PLL3_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_CSI: CSI Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock + */ +#define __HAL_RCC_UART4_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART4CLKSOURCE_D2PCLK1: APB1 Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL2: PLL2_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL3: PLL3_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_CSI: CSI Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock + */ +#define __HAL_RCC_GET_UART4_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART5 clock (UART5CLK). + * + * @param __UART5CLKSource__ specifies the UART5 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART5CLKSOURCE_D2PCLK1: APB1 Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL2: PLL2_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL3: PLL3_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_CSI: CSI Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock + */ +#define __HAL_RCC_UART5_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART5CLKSOURCE_D2PCLK1: APB1 Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL2: PLL2_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL3: PLL3_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_CSI: CSI Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock + */ +#define __HAL_RCC_GET_UART5_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the USART6 clock (USART6CLK). + * + * @param __USART6CLKSource__ specifies the USART6 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART6CLKSOURCE_D2PCLK2: APB2 Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL2: PLL2_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL3: PLL3_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_CSI: CSI Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock + */ +#define __HAL_RCC_USART6_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART6CLKSOURCE_D2PCLK2: APB2 Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL2: PLL2_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL3: PLL3_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_CSI: CSI Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock + */ +#define __HAL_RCC_GET_USART6_SOURCE __HAL_RCC_GET_USART16_SOURCE + +/** @brief macro to configure the UART5 clock (UART7CLK). + * + * @param __UART7CLKSource__ specifies the UART7 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART7CLKSOURCE_D2PCLK1: APB1 Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL2: PLL2_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL3: PLL3_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_CSI: CSI Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock + */ +#define __HAL_RCC_UART7_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART7 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART7CLKSOURCE_D2PCLK1: APB1 Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL2: PLL2_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL3: PLL3_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_CSI: CSI Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock + */ +#define __HAL_RCC_GET_UART7_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART8 clock (UART8CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART8CLKSOURCE_D2PCLK1: APB1 Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL2: PLL2_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL3: PLL3_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_CSI: CSI Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock + */ +#define __HAL_RCC_UART8_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART8CLKSOURCE_D2PCLK1: APB1 Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL2: PLL2_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL3: PLL3_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_CSI: CSI Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock + */ +#define __HAL_RCC_GET_UART8_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +#if defined(UART9) +/** @brief macro to configure the UART9 clock (UART9CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART9CLKSOURCE_D2PCLK1: APB1 Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_PLL2: PLL2_Q Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_PLL3: PLL3_Q Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_HSI: HSI selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_CSI: CSI Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_LSE: LSE selected as UART9 clock + */ +#define __HAL_RCC_UART9_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the UART9 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART9CLKSOURCE_D2PCLK1: APB1 Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_PLL2: PLL2_Q Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_PLL3: PLL3_Q Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_HSI: HSI selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_CSI: CSI Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_LSE: LSE selected as UART9 clock + */ +#define __HAL_RCC_GET_UART9_SOURCE __HAL_RCC_GET_USART16_SOURCE +#endif /* UART9 */ + +#if defined(USART10) +/** @brief macro to configure the USART10 clock (USART10CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART10CLKSOURCE_D2PCLK1: APB1 Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL2: PLL2_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL3: PLL3_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_HSI: HSI selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_CSI: CSI Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_LSE: LSE selected as USART10 clock + */ +#define __HAL_RCC_USART10_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART10 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART10CLKSOURCE_D2PCLK1: APB1 Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL2: PLL2_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL3: PLL3_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_HSI: HSI selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_CSI: CSI Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_LSE: LSE selected as USART10 clock + */ +#define __HAL_RCC_GET_USART10_SOURCE __HAL_RCC_GET_USART16_SOURCE +#endif /* USART10 */ + +/** @brief macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1CLKSource__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_D3PCLK1: APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2: PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3: PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI: HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI: CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE: LSE selected as LPUART1 clock + */ +#if defined (RCC_D3CCIPR_LPUART1SEL) +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL, (uint32_t)(__LPUART1CLKSource__)) +#else +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL, (uint32_t)(__LPUART1CLKSource__)) +#endif /* RCC_D3CCIPR_LPUART1SEL */ + +/** @brief macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_D3PCLK1: APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2: PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3: PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI: HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI: CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE: LSE selected as LPUART1 clock + */ +#if defined (RCC_D3CCIPR_LPUART1SEL) +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL))) +#else +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL))) +#endif /* RCC_D3CCIPR_LPUART1SEL */ + +/** @brief macro to configure the LPTIM1 clock source. + * + * @param __LPTIM1CLKSource__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_D2PCLK1: APB1 Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP: CLKP selected as LPTIM1 clock + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_LPTIM1SEL, (uint32_t)(__LPTIM1CLKSource__)) +#else +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_LPTIM1SEL, (uint32_t)(__LPTIM1CLKSource__)) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ + +/** @brief macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_D2PCLK1: APB1 Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP: CLKP selected as LPTIM1 clock + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_LPTIM1SEL))) +#else +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_LPTIM1SEL))) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ + +/** @brief macro to configure the LPTIM2 clock source. + * + * @param __LPTIM2CLKSource__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM2CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSE: LSE selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSI: LSI Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_CLKP: CLKP selected as LPTIM2 clock + */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2CLKSource__)) +#else +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2CLKSource__)) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ + +/** @brief macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM2CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSE: LSE selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSI: LSI Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_CLKP: CLKP selected as LPTIM2 clock + */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM2SEL))) +#else +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM2SEL))) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ + +/** @brief macro to configure the LPTIM3/4/5 clock source. + * + * @param __LPTIM345CLKSource__ specifies the LPTIM3/4/5 clock source. + * @arg RCC_LPTIM345CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSE: LSE selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSI: LSI Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_CLKP: CLKP selected as LPTIM3/4/5 clock + */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define __HAL_RCC_LPTIM345_CONFIG(__LPTIM345CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM345SEL, (uint32_t)(__LPTIM345CLKSource__)) +#else +#define __HAL_RCC_LPTIM345_CONFIG(__LPTIM345CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM3SEL, (uint32_t)(__LPTIM345CLKSource__)) +#endif /* RCC_D3CCIPR_LPTIM345SEL */ + +/** @brief macro to get the LPTIM3/4/5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM345CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSE: LSE selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSI: LSI Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_CLKP: CLKP selected as LPTIM3/4/5 clock + */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define __HAL_RCC_GET_LPTIM345_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM345SEL))) +#else +#define __HAL_RCC_GET_LPTIM345_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM3SEL))) +#endif /* RCC_D3CCIPR_LPTIM345SEL */ + +/** @brief macro to configure the LPTIM3 clock source. + * + * @param __LPTIM3CLKSource__ specifies the LPTIM3 clock source. + * @arg RCC_LPTIM3CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSE: LSE selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSI: LSI Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_CLKP: CLKP selected as LPTIM3 clock + */ +#define __HAL_RCC_LPTIM3_CONFIG __HAL_RCC_LPTIM345_CONFIG + +/** @brief macro to get the LPTIM3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM3CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSE: LSE selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSI: LSI Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_CLKP: CLKP selected as LPTIM3 clock + */ +#define __HAL_RCC_GET_LPTIM3_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE + +#if defined(LPTIM4) +/** @brief macro to configure the LPTIM4 clock source. + * + * @param __LPTIM4CLKSource__ specifies the LPTIM4 clock source. + * @arg RCC_LPTIM4CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSE: LSE selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSI: LSI Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_CLKP: CLKP selected as LPTIM4 clock + */ +#define __HAL_RCC_LPTIM4_CONFIG __HAL_RCC_LPTIM345_CONFIG + + +/** @brief macro to get the LPTIM4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM4CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSE: LSE selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSI: LSI Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_CLKP: CLKP selected as LPTIM4 clock + */ +#define __HAL_RCC_GET_LPTIM4_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE +#endif /* LPTIM4 */ + +#if defined(LPTIM5) +/** @brief macro to configure the LPTIM5 clock source. + * + * @param __LPTIM5CLKSource__ specifies the LPTIM5 clock source. + * @arg RCC_LPTIM5CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSE: LSE selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSI: LSI Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_CLKP: CLKP selected as LPTIM5 clock + */ +#define __HAL_RCC_LPTIM5_CONFIG __HAL_RCC_LPTIM345_CONFIG + + +/** @brief macro to get the LPTIM5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM5CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSE: LSE selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSI: LSI Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_CLKP: CLKP selected as LPTIM5 clock + */ +#define __HAL_RCC_GET_LPTIM5_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE +#endif /* LPTIM5 */ + +#if defined(QUADSPI) +/** @brief macro to configure the QSPI clock source. + * + * @param __QSPICLKSource__ specifies the QSPI clock source. + * @arg RCC_RCC_QSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL : PLL1_Q Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL2 : PLL2_R Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_CLKP CLKP selected as QSPI clock + */ +#define __HAL_RCC_QSPI_CONFIG(__QSPICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL, (uint32_t)(__QSPICLKSource__)) + + +/** @brief macro to get the QSPI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_QSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL : PLL1_Q Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL2 : PLL2_R Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_CLKP CLKP selected as QSPI clock + */ +#define __HAL_RCC_GET_QSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL))) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @brief macro to configure the OSPI clock source. + * + * @param __OSPICLKSource__ specifies the OSPI clock source. + * @arg RCC_RCC_OSPICLKSOURCE_CDHCLK: Domain1 HCLK Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL : PLL1_Q Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL2 : PLL2_R Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_CLKP CLKP selected as OSPI clock + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define __HAL_RCC_OSPI_CONFIG(__OSPICLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL, (uint32_t)(__OSPICLKSource__)) +#else +#define __HAL_RCC_OSPI_CONFIG(__OSPICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL, (uint32_t)(__OSPICLKSource__)) +#endif /* RCC_CDCCIPR_OCTOSPISEL */ + +/** @brief macro to get the OSPI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_OSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL : PLL1_Q Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL2 : PLL2_R Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_CLKP CLKP selected as OSPI clock + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define __HAL_RCC_GET_OSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL))) +#else +#define __HAL_RCC_GET_OSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL))) +#endif /* RCC_CDCCIPR_OCTOSPISEL */ +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + + +#if defined(DSI) +/** @brief macro to configure the DSI clock source. + * + * @param __DSICLKSource__ specifies the DSI clock source. + * @arg RCC_RCC_DSICLKSOURCE_PHY:DSI clock from PHY is selected as DSI byte lane clock + * @arg RCC_RCC_DSICLKSOURCE_PLL2 : PLL2_Q Clock clock is selected as DSI byte lane clock + */ +#define __HAL_RCC_DSI_CONFIG(__DSICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL, (uint32_t)(__DSICLKSource__)) + + +/** @brief macro to get the DSI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_DSICLKSOURCE_PHY: DSI clock from PHY is selected as DSI byte lane clock + * @arg RCC_RCC_DSICLKSOURCE_PLL2: PLL2_Q Clock clock is selected as DSI byte lane clock + */ +#define __HAL_RCC_GET_DSI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL))) +#endif /*DSI*/ + +/** @brief macro to configure the FMC clock source. + * + * @param __FMCCLKSource__ specifies the FMC clock source. + * @arg RCC_RCC_FMCCLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL : PLL1_Q Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL2 : PLL2_R Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_CLKP CLKP selected as FMC clock + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define __HAL_RCC_FMC_CONFIG(__FMCCLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL, (uint32_t)(__FMCCLKSource__)) +#else +#define __HAL_RCC_FMC_CONFIG(__FMCCLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL, (uint32_t)(__FMCCLKSource__)) +#endif /* RCC_D1CCIPR_FMCSEL */ + +/** @brief macro to get the FMC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_FMCCLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL : PLL1_Q Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL2 : PLL2_R Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_CLKP CLKP selected as FMC clock + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define __HAL_RCC_GET_FMC_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL))) +#else +#define __HAL_RCC_GET_FMC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL))) +#endif /* RCC_D1CCIPR_FMCSEL */ + +/** @brief Macro to configure the USB clock (USBCLK). + * @param __USBCLKSource__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSOURCE_PLL: PLL1Q selected as USB clock + * @arg RCC_USBCLKSOURCE_PLL3: PLL3Q Clock selected as USB clock + * @arg RCC_USBCLKSOURCE_HSI48: RC48 MHZ Clock selected as USB clock + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL, (uint32_t)(__USBCLKSource__)) +#else +#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL, (uint32_t)(__USBCLKSource__)) +#endif /* RCC_D2CCIP2R_USBSEL */ + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USBCLKSOURCE_PLL: PLL1Q selected as USB clock + * @arg RCC_USBCLKSOURCE_PLL3: PLL3Q Clock selected as USB clock + * @arg RCC_USBCLKSOURCE_HSI48: RC48 MHZ Clock selected as USB clock + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL))) +#else +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL))) +#endif /* RCC_D2CCIP2R_USBSEL */ + +/** @brief Macro to configure the ADC clock + * @param __ADCCLKSource__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2: PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3: PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP: CLKP Clock selected as ADC clock + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL, (uint32_t)(__ADCCLKSource__)) +#else +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL, (uint32_t)(__ADCCLKSource__)) +#endif /* RCC_D3CCIPR_ADCSEL */ + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2: PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3: PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP: CLKP Clock selected as ADC clock + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL))) +#else +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL))) +#endif /* RCC_D3CCIPR_ADCSEL */ + +/** @brief Macro to configure the SWPMI1 clock + * @param __SWPMI1CLKSource__ specifies the SWPMI1 clock source. + * This parameter can be one of the following values: + * @arg RCC_SWPMI1CLKSOURCE_D2PCLK1: D2PCLK1 Clock selected as SWPMI1 clock + * @arg RCC_SWPMI1CLKSOURCE_HSI: HSI Clock selected as SWPMI1 clock + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL, (uint32_t)(__SWPMI1CLKSource__)) +#else +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL, (uint32_t)(__SWPMI1CLKSource__)) +#endif /* RCC_D2CCIP1R_SWPSEL */ + +/** @brief Macro to get the SWPMI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SWPMI1CLKSOURCE_D2PCLK1: D2PCLK1 Clock selected as SWPMI1 clock + * @arg RCC_SWPMI1CLKSOURCE_HSI: HSI Clock selected as SWPMI1 clock + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define __HAL_RCC_GET_SWPMI1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL))) +#else +#define __HAL_RCC_GET_SWPMI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL))) +#endif /* RCC_D2CCIP1R_SWPSEL */ + +/** @brief Macro to configure the DFSDM1 clock + * @param __DFSDM1CLKSource__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_D2PCLK: D2PCLK Clock selected as DFSDM1 clock + * @arg RCC_DFSDM1CLKSOURCE_SYS: System Clock selected as DFSDM1 clock + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL, (uint32_t)(__DFSDM1CLKSource__)) +#else +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL, (uint32_t)(__DFSDM1CLKSource__)) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ + +/** @brief Macro to get the DFSDM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_D2PCLK: D2PCLK Clock selected as DFSDM1 clock + * @arg RCC_DFSDM1CLKSOURCE_SYS: System Clock selected as DFSDM1 clock + */ +#if defined (RCC_D2CCIP1R_DFSDM1SEL) +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL))) +#else +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL))) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ + +#if defined(DFSDM2_BASE) +/** @brief Macro to configure the DFSDM2 clock + * @param __DFSDM2CLKSource__ specifies the DFSDM2 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_SRDPCLK1: SRDPCLK1 (APB4) selected as DFSDM2 clock + * @arg RCC_DFSDM2CLKSOURCE_SYS: System Clock selected as DFSDM2 clock + */ +#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL, (uint32_t)(__DFSDM2CLKSource__)) + +/** @brief Macro to get the DFSDM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_SRDPCLK1: SRDPCLK1 (APB4) Clock selected as DFSDM2 clock + * @arg RCC_DFSDM2CLKSOURCE_SYS: System Clock selected as DFSDM2 clock + */ +#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL))) +#endif /* DFSDM2 */ + +/** @brief macro to configure the CEC clock (CECCLK). + * + * @param __CECCLKSource__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI: LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI: CSI Clock selected as CEC clock + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL, (uint32_t)(__CECCLKSource__)) +#else +#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL, (uint32_t)(__CECCLKSource__)) +#endif /* RCC_D2CCIP2R_CECSEL */ + +/** @brief macro to get the CEC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI: LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI: CSI Clock selected as CEC clock + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL))) +#else +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL))) +#endif /* RCC_D2CCIP2R_CECSEL */ + +/** @brief Macro to configure the CLKP : Oscillator clock for peripheral + * @param __CLKPSource__ specifies Oscillator clock for peripheral + * This parameter can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI: HSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_CSI: CSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_HSE: HSE selected Oscillator clock for peripheral + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define __HAL_RCC_CLKP_CONFIG(__CLKPSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL, (uint32_t)(__CLKPSource__)) +#else +#define __HAL_RCC_CLKP_CONFIG(__CLKPSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL, (uint32_t)(__CLKPSource__)) +#endif /* RCC_D1CCIPR_CKPERSEL */ + +/** @brief Macro to get the Oscillator clock for peripheral source. + * @retval The clock source can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI: HSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_CSI: CSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_HSE: HSE selected Oscillator clock for peripheral + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL))) +#else +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL))) +#endif /* RCC_D1CCIPR_CKPERSEL */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @brief Macro to configure the FDCAN clock + * @param __FDCANCLKSource__ specifies clock source for FDCAN + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE: HSE selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL: PLL selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL2: PLL2 selected as FDCAN clock + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define __HAL_RCC_FDCAN_CONFIG(__FDCANCLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL, (uint32_t)(__FDCANCLKSource__)) +#else +#define __HAL_RCC_FDCAN_CONFIG(__FDCANCLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL, (uint32_t)(__FDCANCLKSource__)) +#endif /* RCC_D2CCIP1R_FDCANSEL */ + +/** @brief Macro to get the FDCAN clock + * @retval The clock source can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE: HSE selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL: PLL selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL2: PLL2 selected as FDCAN clock + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL))) +#else +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL))) +#endif /* RCC_D2CCIP1R_FDCANSEL */ + +#endif /*FDCAN1 || FDCAN2*/ + +/** + * @brief Macro to Configure the SPI1/2/3 clock source. + * @param __RCC_SPI123CLKSource__ defines the SPI1/2/3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI123CLKSOURCE_PLL: SPI1/2/3 clock = PLL + * @arg RCC_SPI123CLKSOURCE_PLL2: SPI1/2/3 clock = PLL2 + * @arg RCC_SPI123CLKSOURCE_PLL3: SPI1/2/3 clock = PLL3 + * @arg RCC_SPI123CLKSOURCE_CLKP: SPI1/2/3 clock = CLKP + * @arg RCC_SPI123CLKSOURCE_PIN: SPI1/2/3 clock = External Clock + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define __HAL_RCC_SPI123_CONFIG(__RCC_SPI123CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI123SEL, (__RCC_SPI123CLKSource__)) +#else +#define __HAL_RCC_SPI123_CONFIG(__RCC_SPI123CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI123SEL, (__RCC_SPI123CLKSource__)) +#endif /* RCC_D2CCIP1R_SPI123SEL */ + +/** @brief Macro to get the SPI1/2/3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI123CLKSOURCE_PLL: SPI1/2/3 clock = PLL + * @arg RCC_SPI123CLKSOURCE_PLL2: SPI1/2/3 clock = PLL2 + * @arg RCC_SPI123CLKSOURCE_PLL3: SPI1/2/3 clock = PLL3 + * @arg RCC_SPI123CLKSOURCE_CLKP: SPI1/2/3 clock = CLKP + * @arg RCC_SPI123CLKSOURCE_PIN: SPI1/2/3 clock = External Clock + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define __HAL_RCC_GET_SPI123_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI123SEL))) +#else +#define __HAL_RCC_GET_SPI123_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI123SEL))) +#endif /* RCC_D2CCIP1R_SPI123SEL */ + +/** + * @brief Macro to Configure the SPI1 clock source. + * @param __RCC_SPI1CLKSource__ defines the SPI1 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL: SPI1 clock = PLL + * @arg RCC_SPI1CLKSOURCE_PLL2: SPI1 clock = PLL2 + * @arg RCC_SPI1CLKSOURCE_PLL3: SPI1 clock = PLL3 + * @arg RCC_SPI1CLKSOURCE_CLKP: SPI1 clock = CLKP + * @arg RCC_SPI1CLKSOURCE_PIN: SPI1 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI1_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL: SPI1 clock = PLL + * @arg RCC_SPI1CLKSOURCE_PLL2: SPI1 clock = PLL2 + * @arg RCC_SPI1CLKSOURCE_PLL3: SPI1 clock = PLL3 + * @arg RCC_SPI1CLKSOURCE_CLKP: SPI1 clock = CLKP + * @arg RCC_SPI1CLKSOURCE_PIN: SPI1 clock = External Clock + */ +#define __HAL_RCC_GET_SPI1_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI2 clock source. + * @param __RCC_SPI2CLKSource__ defines the SPI2 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI2CLKSOURCE_PLL: SPI2 clock = PLL + * @arg RCC_SPI2CLKSOURCE_PLL2: SPI2 clock = PLL2 + * @arg RCC_SPI2CLKSOURCE_PLL3: SPI2 clock = PLL3 + * @arg RCC_SPI2CLKSOURCE_CLKP: SPI2 clock = CLKP + * @arg RCC_SPI2CLKSOURCE_PIN: SPI2 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI2_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI2CLKSOURCE_PLL: SPI2 clock = PLL + * @arg RCC_SPI2CLKSOURCE_PLL2: SPI2 clock = PLL2 + * @arg RCC_SPI2CLKSOURCE_PLL3: SPI2 clock = PLL3 + * @arg RCC_SPI2CLKSOURCE_CLKP: SPI2 clock = CLKP + * @arg RCC_SPI2CLKSOURCE_PIN: SPI2 clock = External Clock + */ +#define __HAL_RCC_GET_SPI2_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI3 clock source. + * @param __RCC_SPI3CLKSource__ defines the SPI3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI3CLKSOURCE_PLL: SPI3 clock = PLL + * @arg RCC_SPI3CLKSOURCE_PLL2: SPI3 clock = PLL2 + * @arg RCC_SPI3CLKSOURCE_PLL3: SPI3 clock = PLL3 + * @arg RCC_SPI3CLKSOURCE_CLKP: SPI3 clock = CLKP + * @arg RCC_SPI3CLKSOURCE_PIN: SPI3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI3_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI3CLKSOURCE_PLL: SPI3 clock = PLL + * @arg RCC_SPI3CLKSOURCE_PLL2: SPI3 clock = PLL2 + * @arg RCC_SPI3CLKSOURCE_PLL3: SPI3 clock = PLL3 + * @arg RCC_SPI3CLKSOURCE_CLKP: SPI3 clock = CLKP + * @arg RCC_SPI3CLKSOURCE_PIN: SPI3 clock = External Clock + */ +#define __HAL_RCC_GET_SPI3_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI4/5 clock source. + * @param __RCC_SPI45CLKSource__ defines the SPI4/5 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_D2PCLK2:SPI4/5 clock = D2PCLK2 + * @arg RCC_SPI45CLKSOURCE_PLL2: SPI4/5 clock = PLL2 + * @arg RCC_SPI45CLKSOURCE_PLL3: SPI4/5 clock = PLL3 + * @arg RCC_SPI45CLKSOURCE_HSI: SPI4/5 clock = HSI + * @arg RCC_SPI45CLKSOURCE_CSI: SPI4/5 clock = CSI + * @arg RCC_SPI45CLKSOURCE_HSE: SPI4/5 clock = HSE + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define __HAL_RCC_SPI45_CONFIG(__RCC_SPI45CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI45SEL, (__RCC_SPI45CLKSource__)) +#else +#define __HAL_RCC_SPI45_CONFIG(__RCC_SPI45CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI45SEL, (__RCC_SPI45CLKSource__)) +#endif /* RCC_D2CCIP1R_SPI45SEL */ + +/** @brief Macro to get the SPI4/5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_D2PCLK2:SPI4/5 clock = D2PCLK2 + * @arg RCC_SPI45CLKSOURCE_PLL2: SPI4/5 clock = PLL2 + * @arg RCC_SPI45CLKSOURCE_PLL3: SPI4/5 clock = PLL3 + * @arg RCC_SPI45CLKSOURCE_HSI: SPI4/5 clock = HSI + * @arg RCC_SPI45CLKSOURCE_CSI: SPI4/5 clock = CSI + * @arg RCC_SPI45CLKSOURCE_HSE: SPI4/5 clock = HSE +*/ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI45SEL))) +#else +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI45SEL))) +#endif /* RCC_D2CCIP1R_SPI45SEL */ + +/** + * @brief Macro to Configure the SPI4 clock source. + * @param __RCC_SPI4CLKSource__ defines the SPI4 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI4CLKSOURCE_D2PCLK2:SPI4 clock = D2PCLK2 + * @arg RCC_SPI4CLKSOURCE_PLL2: SPI4 clock = PLL2 + * @arg RCC_SPI4CLKSOURCE_PLL3: SPI4 clock = PLL3 + * @arg RCC_SPI4CLKSOURCE_HSI: SPI4 clock = HSI + * @arg RCC_SPI4CLKSOURCE_CSI: SPI4 clock = CSI + * @arg RCC_SPI4CLKSOURCE_HSE: SPI4 clock = HSE + * @retval None + */ +#define __HAL_RCC_SPI4_CONFIG __HAL_RCC_SPI45_CONFIG + +/** @brief Macro to get the SPI4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI4CLKSOURCE_D2PCLK2:SPI4 clock = D2PCLK2 + * @arg RCC_SPI4CLKSOURCE_PLL2: SPI4 clock = PLL2 + * @arg RCC_SPI4CLKSOURCE_PLL3: SPI4 clock = PLL3 + * @arg RCC_SPI4CLKSOURCE_HSI: SPI4 clock = HSI + * @arg RCC_SPI4CLKSOURCE_CSI: SPI4 clock = CSI + * @arg RCC_SPI4CLKSOURCE_HSE: SPI4 clock = HSE +*/ +#define __HAL_RCC_GET_SPI4_SOURCE __HAL_RCC_GET_SPI45_SOURCE + +/** + * @brief Macro to Configure the SPI5 clock source. + * @param __RCC_SPI5CLKSource__ defines the SPI5 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI5CLKSOURCE_D2PCLK2:SPI5 clock = D2PCLK2 + * @arg RCC_SPI5CLKSOURCE_PLL2: SPI5 clock = PLL2 + * @arg RCC_SPI5CLKSOURCE_PLL3: SPI5 clock = PLL3 + * @arg RCC_SPI5CLKSOURCE_HSI: SPI5 clock = HSI + * @arg RCC_SPI5CLKSOURCE_CSI: SPI5 clock = CSI + * @arg RCC_SPI5CLKSOURCE_HSE: SPI5 clock = HSE + * @retval None + */ +#define __HAL_RCC_SPI5_CONFIG __HAL_RCC_SPI45_CONFIG + +/** @brief Macro to get the SPI5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI5CLKSOURCE_D2PCLK2:SPI5 clock = D2PCLK2 + * @arg RCC_SPI5CLKSOURCE_PLL2: SPI5 clock = PLL2 + * @arg RCC_SPI5CLKSOURCE_PLL3: SPI5 clock = PLL3 + * @arg RCC_SPI5CLKSOURCE_HSI: SPI5 clock = HSI + * @arg RCC_SPI5CLKSOURCE_CSI: SPI5 clock = CSI + * @arg RCC_SPI5CLKSOURCE_HSE: SPI5 clock = HSE +*/ +#define __HAL_RCC_GET_SPI5_SOURCE __HAL_RCC_GET_SPI45_SOURCE + +/** + * @brief Macro to Configure the SPI6 clock source. + * @param __RCC_SPI6CLKSource__ defines the SPI6 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_D3PCLK1:SPI6 clock = D2PCLK1 + * @arg RCC_SPI6CLKSOURCE_PLL2: SPI6 clock = PLL2 + * @arg RCC_SPI6CLKSOURCE_PLL3: SPI6 clock = PLL3 + * @arg RCC_SPI6CLKSOURCE_HSI: SPI6 clock = HSI + * @arg RCC_SPI6CLKSOURCE_CSI: SPI6 clock = CSI + * @arg RCC_SPI6CLKSOURCE_HSE: SPI6 clock = HSE + * @arg RCC_SPI6CLKSOURCE_PIN: SPI6 clock = I2S_CKIN (*) + * + * @retval None + * + * (*) : Available on stm32h7a3xx and stm32h7b3xx family lines. + * + */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define __HAL_RCC_SPI6_CONFIG(__RCC_SPI6CLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SPI6SEL, (__RCC_SPI6CLKSource__)) +#else +#define __HAL_RCC_SPI6_CONFIG(__RCC_SPI6CLKSource__ )\ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_SPI6SEL, (__RCC_SPI6CLKSource__)) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +/** @brief Macro to get the SPI6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_D3PCLK1:SPI6 clock = D2PCLK1 + * @arg RCC_SPI6CLKSOURCE_PLL2: SPI6 clock = PLL2 + * @arg RCC_SPI6CLKSOURCE_PLL3: SPI6 clock = PLL3 + * @arg RCC_SPI6CLKSOURCE_HSI: SPI6 clock = HSI + * @arg RCC_SPI6CLKSOURCE_CSI: SPI6 clock = CSI + * @arg RCC_SPI6CLKSOURCE_HSE: SPI6 clock = HSE + * @arg RCC_SPI6CLKSOURCE_PIN: SPI6 clock = I2S_CKIN +*/ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SPI6SEL))) +#else +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_SPI6SEL))) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +/** @brief Macro to configure the SDMMC clock + * @param __SDMMCCLKSource__ specifies clock source for SDMMC + * This parameter can be one of the following values: + * @arg RCC_SDMMCCLKSOURCE_PLL: PLLQ selected as SDMMC clock + * @arg RCC_SDMMCCLKSOURCE_PLL2: PLL2R selected as SDMMC clock + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define __HAL_RCC_SDMMC_CONFIG(__SDMMCCLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL, (uint32_t)(__SDMMCCLKSource__)) +#else +#define __HAL_RCC_SDMMC_CONFIG(__SDMMCCLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL, (uint32_t)(__SDMMCCLKSource__)) +#endif /* RCC_D1CCIPR_SDMMCSEL */ + +/** @brief Macro to get the SDMMC clock + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define __HAL_RCC_GET_SDMMC_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL))) +#else +#define __HAL_RCC_GET_SDMMC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL))) +#endif /* RCC_D1CCIPR_SDMMCSEL */ + +/** @brief macro to configure the RNG clock (RNGCLK). + * + * @param __RNGCLKSource__ specifies the RNG clock source. + * This parameter can be one of the following values: + * @arg RCC_RNGCLKSOURCE_HSI48: HSI48 selected as RNG clock + * @arg RCC_RNGCLKSOURCE_PLL: PLL1Q selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSE: LSE selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSI: LSI selected as RNG clock + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define __HAL_RCC_RNG_CONFIG(__RNGCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL, (uint32_t)(__RNGCLKSource__)) +#else +#define __HAL_RCC_RNG_CONFIG(__RNGCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL, (uint32_t)(__RNGCLKSource__)) +#endif /* RCC_D2CCIP2R_RNGSEL */ + +/** @brief macro to get the RNG clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RNGCLKSOURCE_HSI48: HSI48 selected as RNG clock + * @arg RCC_RNGCLKSOURCE_PLL: PLL1Q selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSE: LSE selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSI: LSI selected as RNG clock + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL))) +#else +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL))) +#endif /* RCC_D2CCIP2R_RNGSEL */ + +#if defined(HRTIM1) +/** @brief Macro to configure the HRTIM1 prescaler clock source. + * @param __HRTIM1CLKSource__ specifies the HRTIM1 prescaler clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_HRTIM1CLK_TIMCLK Timers clock selected as HRTIM1 prescaler clock + * @arg @ref RCC_HRTIM1CLK_CPUCLK CPU Clock selected as HRTIM1 clock + */ +#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HRTIMSEL, (uint32_t)(__HRTIM1CLKSource__)) + +/** @brief Macro to get the HRTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_HRTIM1CLK_TIMCLK Timers clock selected as HRTIM1 prescaler clock + * @arg @ref RCC_HRTIM1CLK_CPUCLK CPU Clock selected as HRTIM1 clock + */ +#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HRTIMSEL))) +#endif /* HRTIM1 */ + +/** @brief Macro to configure the Timers clocks prescalers + * @param __PRESC__ specifies the Timers clocks prescalers selection + * This parameter can be one of the following values: + * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is + * equal to rcc_hclk1 if D2PPREx is corresponding to division by 1 or 2, + * else it is equal to 2 x Frcc_pclkx_d2 (default after reset) + * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is + * equal to rcc_hclk1 if D2PPREx is corresponding to division by 1, 2 or 4, + * else it is equal to 4 x Frcc_pclkx_d2 + */ +#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->CFGR &= ~(RCC_CFGR_TIMPRE);\ + RCC->CFGR |= (__PRESC__); \ + }while(0) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +#if defined(DUAL_CORE) +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line for CM4. + * @retval None + */ +#define __HAL_RCC_C2_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->C2IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line for CM4. + * @retval None + */ +#define __HAL_RCC_C2_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->C2IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->C2EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->C2EMR1, RCC_EXTI_LINE_LSECSS) +#endif /* DUAL_CORE */ + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) + +#if defined(DUAL_CORE) +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not for CM4. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->C2PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag or not for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->C2PR1, RCC_EXTI_LINE_LSECSS) +#endif /* DUAL_CORE */ +/** + * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after pre-scaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + + +/** + * @} + */ + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint64_t PeriphClk); +uint32_t HAL_RCCEx_GetD1PCLK1Freq(void); +uint32_t HAL_RCCEx_GetD3PCLK1Freq(void); +uint32_t HAL_RCCEx_GetD1SysClockFreq(void); +void HAL_RCCEx_GetPLL1ClockFreq(PLL1_ClocksTypeDef *PLL1_Clocks); +void HAL_RCCEx_GetPLL2ClockFreq(PLL2_ClocksTypeDef *PLL2_Clocks); +void HAL_RCCEx_GetPLL3ClockFreq(PLL3_ClocksTypeDef *PLL3_Clocks); +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); +#if defined(DUAL_CORE) +void HAL_RCCEx_EnableBootCore(uint32_t RCC_BootCx); +#endif /*DUAL_CORE*/ +#if defined(RCC_GCR_WW1RSC) +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx); +#endif /*RCC_GCR_WW1RSC*/ +/** + * @} + */ + + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(const RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_PLL2CLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL2_DIVP) || \ + ((VALUE) == RCC_PLL2_DIVQ) || \ + ((VALUE) == RCC_PLL2_DIVR)) + +#define IS_RCC_PLL3CLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL3_DIVP) || \ + ((VALUE) == RCC_PLL3_DIVQ) || \ + ((VALUE) == RCC_PLL3_DIVR)) + +#if defined(RCC_D2CCIP2R_USART16SEL) +#define IS_RCC_USART16CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART16CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_HSI)) +#else +#define IS_RCC_USART16CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART16CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_CDPCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_HSI)) +/* alias*/ +#define IS_RCC_USART16910CLKSOURCE IS_RCC_USART16CLKSOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ + +#if defined(RCC_D2CCIP2R_USART28SEL) +#define IS_RCC_USART234578CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART234578CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_HSI)) +#else +#define IS_RCC_USART234578CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART234578CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CDPCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_HSI)) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_HSI)) + +#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART2CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_HSI)) + +#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART3CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_HSI)) + +#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_HSI)) + +#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_HSI)) + +#define IS_RCC_USART6CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART6CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART6CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_HSI)) + +#define IS_RCC_UART7CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART7CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_HSI)) + +#define IS_RCC_UART8CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART8CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_HSI)) + +#if defined(UART9) +#define IS_RCC_UART9CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART9CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_UART9CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_HSI)) +#endif + +#if defined(USART10) +#define IS_RCC_USART10CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART10CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART10CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_HSI)) +#endif + +#define IS_RCC_LPUART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPUART1CLKSOURCE_D3PCLK1) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_HSI)) + +#if defined(I2C5) +#define IS_RCC_I2C1235CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1235CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_CSI)) + +#define IS_RCC_I2C123CLKSOURCE IS_RCC_I2C1235CLKSOURCE /* For API Backward compatibility */ +#else +#define IS_RCC_I2C123CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C123CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C123CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C123CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C123CLKSOURCE_CSI)) +#endif /*I2C5*/ + +#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C1CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C1CLKSOURCE_CSI)) + +#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C2CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C2CLKSOURCE_CSI)) + +#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C3CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C3CLKSOURCE_CSI)) + +#define IS_RCC_I2C4CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C4CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C4CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_I2C4CLKSOURCE_CSI)) + +#if defined(I2C5) +#define IS_RCC_I2C5CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C5CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C5CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C5CLKSOURCE_CSI)) +#endif /*I2C5*/ + +#define IS_RCC_RNGCLKSOURCE(SOURCE) (((SOURCE) == RCC_RNGCLKSOURCE_HSI48)|| \ + ((SOURCE) == RCC_RNGCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_RNGCLKSOURCE_LSE) || \ + ((SOURCE) == RCC_RNGCLKSOURCE_LSI)) + +#if defined(HRTIM1) +#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_TIMCLK) || \ + ((SOURCE) == RCC_HRTIM1CLK_CPUCLK)) +#endif + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USBCLKSOURCE_HSI48)) + +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) + +#if defined(SAI3) +#define IS_RCC_SAI23CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PIN)) + +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN)) + + +#define IS_RCC_SAI3CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PIN)) +#endif + +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define IS_RCC_SAI2ACLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_SPDIF)) +#endif + +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define IS_RCC_SAI2BCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_SPDIF)) +#endif + +#define IS_RCC_SPI123CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PIN)) + +#define IS_RCC_SPI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PIN)) + +#define IS_RCC_SPI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PIN)) + +#define IS_RCC_SPI3CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PIN)) + +#define IS_RCC_SPI45CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI45CLKSOURCE_D2PCLK2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSE)) + +#define IS_RCC_SPI4CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI4CLKSOURCE_D2PCLK2) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_HSE)) + +#define IS_RCC_SPI5CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI5CLKSOURCE_D2PCLK2)|| \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_HSE)) + +#if defined(RCC_D3CCIPR_SPI6SEL) +#define IS_RCC_SPI6CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_D3PCLK1) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE)) +#else +#define IS_RCC_SPI6CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_D3PCLK1) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PIN)) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +#if defined(SAI4) +#define IS_RCC_SAI4ACLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PIN)) + +#define IS_RCC_SAI4BCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PIN)) +#endif /*SAI4*/ + +#define IS_RCC_PLL3M_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#define IS_RCC_PLL3N_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#define IS_RCC_PLL3P_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL3Q_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL3R_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLL2M_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#define IS_RCC_PLL2N_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#define IS_RCC_PLL2P_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL2Q_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL2R_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLL2RGE_VALUE(VALUE) (((VALUE) == RCC_PLL2VCIRANGE_0) || \ + ((VALUE) == RCC_PLL2VCIRANGE_1) || \ + ((VALUE) == RCC_PLL2VCIRANGE_2) || \ + ((VALUE) == RCC_PLL2VCIRANGE_3)) + +#define IS_RCC_PLL3RGE_VALUE(VALUE) (((VALUE) == RCC_PLL3VCIRANGE_0) || \ + ((VALUE) == RCC_PLL3VCIRANGE_1) || \ + ((VALUE) == RCC_PLL3VCIRANGE_2) || \ + ((VALUE) == RCC_PLL3VCIRANGE_3)) + +#define IS_RCC_PLL2VCO_VALUE(VALUE) (((VALUE) == RCC_PLL2VCOWIDE) || \ + ((VALUE) == RCC_PLL2VCOMEDIUM)) + +#define IS_RCC_PLL3VCO_VALUE(VALUE) (((VALUE) == RCC_PLL3VCOWIDE) || \ + ((VALUE) == RCC_PLL3VCOMEDIUM)) + +#define IS_RCC_LPTIM1CLK(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM2CLK(SOURCE) (((SOURCE) == RCC_LPTIM2CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM345CLK(SOURCE) (((SOURCE) == RCC_LPTIM345CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM3CLK(SOURCE) (((SOURCE) == RCC_LPTIM3CLKSOURCE_D3PCLK1) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_CLKP)) + +#if defined(LPTIM4) +#define IS_RCC_LPTIM4CLK(SOURCE) (((SOURCE) == RCC_LPTIM4CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_CLKP)) +#endif /* LPTIM4*/ + +#if defined(LPTIM5) +#define IS_RCC_LPTIM5CLK(SOURCE) (((SOURCE) == RCC_LPTIM5CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_CLKP)) +#endif /*LPTIM5*/ + +#if defined(QUADSPI) +#define IS_RCC_QSPICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_QSPICLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_CLKP)) +#endif /*QUADSPI*/ + +#if defined(OCTOSPI1) || defined(OCTOSPI1) +#define IS_RCC_OSPICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_OSPICLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_CLKP)) +#endif /*OCTOSPI1 || OCTOSPI1*/ + +#if defined(DSI) +#define IS_RCC_DSICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_DSICLKSOURCE_PHY) || \ + ((__SOURCE__) == RCC_DSICLKSOURCE_PLL2)) +#endif /*DSI*/ + +#define IS_RCC_FMCCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_FMCCLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_CLKP)) + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_RCC_FDCANCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL2)) +#endif /*FDCAN1 || FDCAN2*/ + +#define IS_RCC_SDMMC(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMCCLKSOURCE_PLL2)) + +#define IS_RCC_ADCCLKSOURCE(SOURCE) (((SOURCE) == RCC_ADCCLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_ADCCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_ADCCLKSOURCE_CLKP)) + +#define IS_RCC_SWPMI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SWPMI1CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_SWPMI1CLKSOURCE_HSI)) + +#define IS_RCC_DFSDM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_DFSDM1CLKSOURCE_SYS)) + +#if defined(DFSDM2_BASE) +#define IS_RCC_DFSDM2CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM2CLKSOURCE_SRDPCLK1) || \ + ((SOURCE) == RCC_DFSDM2CLKSOURCE_SYS)) +#endif /*DFSDM2*/ + +#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE)(((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_HSI)) + +#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_LSE) || \ + ((SOURCE) == RCC_CECCLKSOURCE_LSI) || \ + ((SOURCE) == RCC_CECCLKSOURCE_CSI)) + +#define IS_RCC_CLKPSOURCE(SOURCE) (((SOURCE) == RCC_CLKPSOURCE_HSI) || \ + ((SOURCE) == RCC_CLKPSOURCE_CSI) || \ + ((SOURCE) == RCC_CLKPSOURCE_HSE)) +#define IS_RCC_TIMPRES(VALUE) \ + (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \ + ((VALUE) == RCC_TIMPRES_ACTIVATED)) + +#if defined(DUAL_CORE) +#define IS_RCC_BOOT_CORE(CORE) (((CORE) == RCC_BOOT_C1) || \ + ((CORE) == RCC_BOOT_C2)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_RCC_SCOPE_WWDG(WWDG) (((WWDG) == RCC_WWDG1) || \ + ((WWDG) == RCC_WWDG2)) +#else +#define IS_RCC_SCOPE_WWDG(WWDG) ((WWDG) == RCC_WWDG1) + +#endif /*DUAL_CORE*/ + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB2) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB1) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_PIN)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_RCC_EX_H */ +