Index: ctrl/firmware/Main/CubeMX/Core/Inc/stm32h7xx_it.h
===================================================================
--- ctrl/firmware/Main/CubeMX/Core/Inc/stm32h7xx_it.h	(revision 109)
+++ ctrl/firmware/Main/CubeMX/Core/Inc/stm32h7xx_it.h	(revision 110)
@@ -23,5 +23,5 @@
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
Index: ctrl/firmware/Main/CubeMX/Core/Src/adc.c
===================================================================
--- ctrl/firmware/Main/CubeMX/Core/Src/adc.c	(revision 109)
+++ ctrl/firmware/Main/CubeMX/Core/Src/adc.c	(revision 110)
@@ -54,5 +54,5 @@
   */
   hadc2.Instance = ADC2;
-  hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV2;
+  hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
   hadc2.Init.Resolution = ADC_RESOLUTION_16B;
   hadc2.Init.ScanConvMode = ADC_SCAN_ENABLE;
@@ -68,6 +68,6 @@
   hadc2.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE;
   hadc2.Init.OversamplingMode = ENABLE;
-  hadc2.Init.Oversampling.Ratio = 64;
-  hadc2.Init.Oversampling.RightBitShift = ADC_RIGHTBITSHIFT_6;
+  hadc2.Init.Oversampling.Ratio = 256;
+  hadc2.Init.Oversampling.RightBitShift = ADC_RIGHTBITSHIFT_8;
   hadc2.Init.Oversampling.TriggeredMode = ADC_TRIGGEREDMODE_SINGLE_TRIGGER;
   hadc2.Init.Oversampling.OversamplingStopReset = ADC_REGOVERSAMPLING_CONTINUED_MODE;
@@ -81,5 +81,5 @@
   sConfig.Channel = ADC_CHANNEL_3;
   sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_810CYCLES_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_16CYCLES_5;
   sConfig.SingleDiff = ADC_DIFFERENTIAL_ENDED;
   sConfig.OffsetNumber = ADC_OFFSET_NONE;
@@ -108,5 +108,5 @@
 
   uint32_t offset[2] = { 0U };
-  const uint32_t max_samples = 16U;
+  const uint32_t max_samples = 8192U / ((hadc2.Init.OversamplingMode == ENABLE)? hadc2.Init.Oversampling.Ratio: 1);
   // Starting DMA converstion
   if (HAL_OK != HAL_ADC_Start_DMA(&hadc2, (uint32_t*)&ADC2Data, ADC2_CHANNELS_NUM)) Error_Handler();
@@ -126,6 +126,6 @@
   if (HAL_OK == HAL_ADC_Stop_DMA(&hadc2))
   {
-	  LL_ADC_SetOffset(hadc2.Instance, LL_ADC_OFFSET_1, LL_ADC_CHANNEL_3, (offset[0]/max_samples) << 6U);
-	  LL_ADC_SetOffset(hadc2.Instance, LL_ADC_OFFSET_2, LL_ADC_CHANNEL_4, (offset[1]/max_samples) << 6U);
+	  LL_ADC_SetOffset(hadc2.Instance, LL_ADC_OFFSET_1, LL_ADC_CHANNEL_3, (offset[0]/max_samples) * ((hadc2.Init.OversamplingMode == ENABLE)? hadc2.Init.Oversampling.Ratio: 1));
+	  LL_ADC_SetOffset(hadc2.Instance, LL_ADC_OFFSET_2, LL_ADC_CHANNEL_4, (offset[1]/max_samples) * ((hadc2.Init.OversamplingMode == ENABLE)? hadc2.Init.Oversampling.Ratio: 1));
   }
 
@@ -184,5 +184,5 @@
   sConfig.Channel = ADC_CHANNEL_10;
   sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC3_SAMPLETIME_640CYCLES_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_810CYCLES_5;
   sConfig.SingleDiff = ADC_SINGLE_ENDED;
   sConfig.OffsetNumber = ADC_OFFSET_NONE;
Index: ctrl/firmware/Main/CubeMX/Core/Src/main.c
===================================================================
--- ctrl/firmware/Main/CubeMX/Core/Src/main.c	(revision 109)
+++ ctrl/firmware/Main/CubeMX/Core/Src/main.c	(revision 110)
@@ -192,5 +192,5 @@
   /** Configure the main internal regulator output voltage
   */
-  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
 
   while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
@@ -266,7 +266,7 @@
   PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
   PeriphClkInitStruct.PLL3.PLL3M = 25;
-  PeriphClkInitStruct.PLL3.PLL3N = 180;
+  PeriphClkInitStruct.PLL3.PLL3N = 150;
   PeriphClkInitStruct.PLL3.PLL3P = 2;
-  PeriphClkInitStruct.PLL3.PLL3Q = 8;
+  PeriphClkInitStruct.PLL3.PLL3Q = 6;
   PeriphClkInitStruct.PLL3.PLL3R = 3;
   PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_0;
@@ -350,5 +350,6 @@
 
   /* USER CODE END Callback 0 */
-  if (htim->Instance == TIM7) {
+  if (htim->Instance == TIM7)
+  {
     HAL_IncTick();
   }
Index: ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_hal_timebase_tim.c
===================================================================
--- ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_hal_timebase_tim.c	(revision 109)
+++ ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_hal_timebase_tim.c	(revision 110)
@@ -63,5 +63,5 @@
   __HAL_RCC_TIM7_CLK_ENABLE();
 
-/* Get clock configuration */
+  /* Get clock configuration */
   HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
 
@@ -85,10 +85,9 @@
 
   /* Initialize TIMx peripheral as follow:
-
-  + Period = [(TIM7CLK/1000) - 1]. to have a (1/1000) s time base.
-  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
-  + ClockDivision = 0
-  + Counter direction = Up
-  */
+   * Period = [(TIM7CLK/1000) - 1]. to have a (1/1000) s time base.
+   * Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
+   * ClockDivision = 0
+   * Counter direction = Up
+   */
   htim7.Init.Period = (1000000U / 1000U) - 1U;
   htim7.Init.Prescaler = uwPrescalerValue;
Index: ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_it.c
===================================================================
--- ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_it.c	(revision 109)
+++ ctrl/firmware/Main/CubeMX/Core/Src/stm32h7xx_it.c	(revision 110)
@@ -483,9 +483,10 @@
 	{
 		HAL_GPIO_WritePin(RX1_LED_GPIO_Port, RX1_LED_Pin, GPIO_PIN_SET);
-		charge_tmp = (((int64_t)ADC2Data.Name.charge_strom * ((int64_t)VREF) * 1000LL) / ((int64_t)0xFFFF)) / 50LL;
-		load_tmp = (((int64_t)ADC2Data.Name.eload_strom * ((int64_t)VREF) * 1000LL) / ((int64_t)0xFFFF)) / 50LL;
-		charge_i = (float)charge_tmp / 500LL;
-		load_i = (float)load_tmp / 500LL;
+		//charge_tmp = (((int64_t)ADC2Data.Name.charge_strom * ((int64_t)VREF) * 1000LL) / ((int64_t)0xFFFF)) / 50LL;
+		//load_tmp = (((int64_t)ADC2Data.Name.eload_strom * ((int64_t)VREF) * 1000LL) / ((int64_t)0xFFFF)) / 50LL;
+		//charge_i = (float)charge_tmp / 500LL;
+		//load_i = (float)load_tmp / 500LL;
 		//printf("\t\t\t%5.2fA, %5.2fA\n", charge_i, load_i);
+		printf("%d, %d\n", ADC2Data.Name.charge_strom, ADC2Data.Name.eload_strom);
 		HAL_GPIO_WritePin(RX1_LED_GPIO_Port, RX1_LED_Pin, GPIO_PIN_RESET);
 	}
Index: ctrl/firmware/Main/CubeMX/charger.ioc
===================================================================
--- ctrl/firmware/Main/CubeMX/charger.ioc	(revision 109)
+++ ctrl/firmware/Main/CubeMX/charger.ioc	(revision 110)
@@ -217,6 +217,5 @@
 Dma.USART3_TX.2.SyncSignalID=NONE
 FATFS.BSP.number=1
-FATFS.IPParameters=_USE_FIND,_USE_EXPAND,_USE_LABEL,_USE_LFN,_LFN_UNICODE,_MULTI_PARTITION,_FS_EXFAT,_USE_MUTEX,_FS_REENTRANT,_FS_NORTC,_NORTC_YEAR,_NORTC_MDAY,_NORTC_MON,_STRF_ENCODE,_USE_STRFUNC,_MAX_SS,_VOLUMES
-FATFS._FS_EXFAT=0
+FATFS.IPParameters=_USE_FIND,_USE_LABEL,_USE_LFN,_LFN_UNICODE,_MULTI_PARTITION,_USE_MUTEX,_FS_REENTRANT,_FS_NORTC,_NORTC_YEAR,_NORTC_MDAY,_NORTC_MON,_STRF_ENCODE,_USE_STRFUNC,_MAX_SS,_VOLUMES
 FATFS._FS_NORTC=0
 FATFS._FS_REENTRANT=1
@@ -228,5 +227,4 @@
 FATFS._NORTC_YEAR=2025
 FATFS._STRF_ENCODE=0
-FATFS._USE_EXPAND=1
 FATFS._USE_FIND=1
 FATFS._USE_LABEL=1
@@ -752,5 +750,5 @@
 ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_BDMA_Init-BDMA-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI4_Init-SPI4-false-HAL-true,6-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true,7-SystemClock_Config-RCC-false-HAL-false,8-MX_FATFS_Init-FATFS-false-HAL-false,9-MX_TIM8_Init-TIM8-false-HAL-true,10-MX_SPI2_Init-SPI2-false-HAL-true,11-MX_USART2_UART_Init-USART2-false-HAL-true,12-MX_USART10_UART_Init-USART10-false-HAL-true,13-MX_TIM6_Init-TIM6-false-HAL-true,14-MX_I2C2_Init-I2C2-false-HAL-true,15-MX_ADC3_Init-ADC3-false-HAL-true,16-MX_TIM3_Init-TIM3-false-HAL-true,17-MX_I2C1_Init-I2C1-false-HAL-true,18-MX_USART3_UART_Init-USART3-false-HAL-true,19-MX_DTS_Init-DTS-false-HAL-true,20-MX_DAC1_Init-DAC1-false-HAL-true,21-MX_TIM1_Init-TIM1-false-HAL-true,22-MX_ADC2_Init-ADC2-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,0-MX_VREFBUF_Init-VREFBUF-false-HAL-true
 RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_PLL3
-RCC.ADCFreq_Value=60000000
+RCC.ADCFreq_Value=50000000
 RCC.AHB12Freq_Value=100000000
 RCC.AHB4Freq_Value=100000000
@@ -772,18 +770,19 @@
 RCC.DIVN1=40
 RCC.DIVN2=20
-RCC.DIVN3=180
+RCC.DIVN3=150
 RCC.DIVP1Freq_Value=100000000
 RCC.DIVP2Freq_Value=125000000
-RCC.DIVP3Freq_Value=90000000
+RCC.DIVP3Freq_Value=75000000
 RCC.DIVQ1Freq_Value=100000000
 RCC.DIVQ2=11
 RCC.DIVQ2Freq_Value=22727272.727272727
-RCC.DIVQ3=8
-RCC.DIVQ3Freq_Value=22500000
+RCC.DIVQ3=6
+RCC.DIVQ3Freq_Value=25000000
 RCC.DIVR1Freq_Value=100000000
 RCC.DIVR2=5
 RCC.DIVR2Freq_Value=50000000
 RCC.DIVR3=3
-RCC.DIVR3Freq_Value=60000000
+RCC.DIVR3Freq_Value=50000000
+RCC.EnbaleCSS=false
 RCC.FDCANFreq_Value=100000000
 RCC.FMCFreq_Value=100000000
@@ -794,14 +793,15 @@
 RCC.I2C123Freq_Value=64000000
 RCC.I2C4Freq_Value=100000000
-RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123CLockSelection,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLLFRACN,PLLSourceVirtual,PWR_Regulator_Voltage_Scale,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMC1CLockSelection,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123CLockSelection,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Spi45ClockSelection,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
+RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,EnbaleCSS,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123CLockSelection,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLL2_VCO_SEL-AdvancedSettings,PLLFRACN,PLLSourceVirtual,PWR_Regulator_Voltage_Scale,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMC1CLockSelection,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123CLockSelection,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Spi45ClockSelection,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
 RCC.LPTIM1Freq_Value=100000000
 RCC.LPTIM2Freq_Value=100000000
 RCC.LPTIM345Freq_Value=100000000
 RCC.LPUART1Freq_Value=100000000
-RCC.LTDCFreq_Value=60000000
+RCC.LTDCFreq_Value=50000000
 RCC.MCO1PinFreq_Value=64000000
 RCC.MCO2PinFreq_Value=100000000
 RCC.PLL2FRACN=0
 RCC.PLL2_VCI_Range-AdvancedSettings=RCC_PLL2VCIRANGE_3
+RCC.PLL2_VCO_SEL-AdvancedSettings=RCC_PLL2VCOMEDIUM
 RCC.PLLFRACN=0
 RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
@@ -829,11 +829,11 @@
 RCC.TraceFreq_Value=100000000
 RCC.USART16CLockSelection=RCC_USART16910CLKSOURCE_PLL3
-RCC.USART16Freq_Value=22500000
+RCC.USART16Freq_Value=25000000
 RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL3
-RCC.USART234578Freq_Value=22500000
+RCC.USART234578Freq_Value=25000000
 RCC.USBFreq_Value=100000000
 RCC.VCO1OutputFreq_Value=200000000
 RCC.VCO2OutputFreq_Value=250000000
-RCC.VCO3OutputFreq_Value=180000000
+RCC.VCO3OutputFreq_Value=150000000
 RCC.VCOInput1Freq_Value=5000000
 RCC.VCOInput2Freq_Value=12500000