source: ctrl/firmware/Main/SES/charger.emProject@ 10

Last change on this file since 10 was 10, checked in by Zed, 12 months ago

Added SEGGER project files.

File size: 3.4 KB
Line 
1<!DOCTYPE CrossStudio_Project_File>
2<solution Name="charger" version="2" target="8">
3 <configuration
4 Name="Debug"
5 c_preprocessor_definitions="DEBUG"
6 gcc_debugging_level="Level 3"
7 gcc_omit_frame_pointer="Yes"
8 gcc_optimization_level="None" />
9 <configuration
10 Name="Release"
11 c_preprocessor_definitions="NDEBUG"
12 gcc_debugging_level="Level 2"
13 gcc_omit_frame_pointer="Yes"
14 gcc_optimization_level="Level 2 balanced" />
15 <configuration
16 LIBRARY_HEAP_TYPE="Minimal"
17 LIBRARY_IO_TYPE="SEMIHOST (host-formatted)"
18 LIBRARY_LOCALES="Minimal"
19 Name="Release_MinSize"
20 arm_library_optimization="Small"
21 c_preprocessor_definitions="NDEBUG;__OPTIMIZATION_SMALL"
22 cpp_enable_exceptions="No"
23 gcc_debugging_level="None"
24 gcc_omit_frame_pointer="Yes"
25 gcc_optimization_level="Level 2 for size"
26 gcc_short_enum="Minimal Container Size"
27 libcxx="Yes (No Exceptions)"
28 link_dedupe_code="Yes"
29 link_dedupe_data="Yes"
30 link_merge_strings="Yes"
31 link_time_optimization="Yes"
32 linker_printf_fmt_level="int"
33 linker_printf_fp_enabled="No"
34 linker_printf_width_precision_supported="No" />
35 <project Name="charger">
36 <configuration
37 LIBRARY_IO_TYPE="RTT"
38 Name="Common"
39 Target="STM32H723ZETx"
40 arm_architecture="v7EM"
41 arm_compiler_variant="SEGGER"
42 arm_core_type="Cortex-M7"
43 arm_endian="Little"
44 arm_fp_abi="Hard"
45 arm_fpu_type="FPv5-D16"
46 arm_linker_heap_size="2048"
47 arm_linker_process_stack_size="0"
48 arm_linker_stack_size="2048"
49 arm_linker_variant="SEGGER"
50 arm_simulator_memory_simulation_parameter="RAM;0x00000000;0x00010000;ROM;0x08000000;0x00080000;RAM;0x20000000;0x00020000;RAM;0x24000000;0x00020000;RAM;0x30000000;0x00008000;RAM;0x38000000;0x00004000;RAM;0x38800000;0x00001000"
51 arm_target_device_name="STM32H723ZE"
52 arm_target_interface_type="SWD"
53 debug_register_definition_file="$(ProjectDir)/STM32H723_Registers.xml"
54 debug_stack_pointer_start="__stack_end__"
55 debug_target_connection="J-Link"
56 gcc_entry_point="Reset_Handler"
57 link_dedupe_code="Yes"
58 link_linker_script_file="Setup/SEGGER_Flash.icf"
59 linker_memory_map_file="$(ProjectDir)/STM32H723ZETx_MemoryMap.xml"
60 linker_output_format="hex"
61 linker_section_placements_segments="FLASH1 RX 0x00000000 0x00100000;RAM1 RWX 0x20000000 0x00010000"
62 macros="DeviceHeaderFile=$(PackagesDir)/STM32H7xx/Device/Include/stm32h7xx.h;DeviceSystemFile=$(PackagesDir)/STM32H7xx/Device/Source/system_stm32h7xx.c;DeviceVectorsFile=$(PackagesDir)/STM32H7xx/Source/stm32h723xx_Vectors.s;DeviceFamily=STM32H7xx;DeviceSubFamily=STM32H723"
63 project_directory=""
64 project_type="Executable" />
65 <configuration Name="Release" link_dedupe_code="Yes" />
66 <configuration
67 LIBRARY_IO_TYPE="SEMIHOST (host-formatted)"
68 Name="Release_MinSize" />
69 <folder Name="Core">
70 <folder Name="Inc">
71 <file file_name="../CubeMX/Core/Inc/main.h" />
72 </folder>
73 <folder Name="Src">
74 <file file_name="../CubeMX/Core/Src/main.c" />
75 </folder>
76 </folder>
77 <folder Name="Setup">
78 <file file_name="Setup/SEGGER_Flash.icf" />
79 </folder>
80 <folder Name="System">
81 <file file_name="System/Cortex_M_Startup.s" />
82 <file file_name="System/SEGGER_THUMB_Startup.s" />
83 <file file_name="STM32H7xx/Source/stm32h723xx_Vectors.s" />
84 </folder>
85 </project>
86</solution>
Note: See TracBrowser for help on using the repository browser.