source:
ctrl/firmware/Main/SES/Core/Src
| Name | Size | Rev | Age | Author | Last Change |
|---|---|---|---|---|---|
| ../ | |||||
| beeper_task.cpp | 763 bytes | 91 | 10 months | ADC module was activated. | |
| bme280.c | 5.4 KB | 88 | 10 months | BME280 data transfer works ok. Device returns its ID 0x60. | |
| bme_task.cpp | 1.6 KB | 110 | 9 months | Fixing project. | |
| eth_task.cpp | 4.0 KB | 82 | 10 months | DMA transfer to µSD-card was implemented. | |
| fan_task.cpp | 1.2 KB | 109 | 9 months | Fixing project. | |
| gsm_rx_thread.cpp | 2.6 KB | 66 | 10 months | FAN PWM control and TACHO signal measuring are working. | |
| gsm_thread.cpp | 9.9 KB | 65 | 10 months | GSM, USB, BLE and GPS are working. | |
| gui_task.cpp | 2.4 KB | 114 | 7 months | Fixing the project. | |
| keys_task.cpp | 1.4 KB | 109 | 9 months | Fixing project. | |
| main_task.cpp | 4.1 KB | 110 | 9 months | Fixing project. | |
| mb_slave_task.cpp | 760 bytes | 83 | 10 months | Modbus Master and Slave Hardware were tested. | |
| modbus.c | 31.6 KB | 83 | 10 months | Modbus Master and Slave Hardware were tested. | |
| onewire_task.cpp | 8.9 KB | 110 | 9 months | Fixing project. | |
| st7789.c | 141.1 KB | 106 | 9 months | Fixing project. | |
| sysdata.c | 386 bytes | 87 | 10 months | RTC is working. | |
| utils.cpp | 496 bytes | 64 | 11 months | USART3 TX DMA is working. | |
|
Note:
See TracBrowser
for help on using the repository browser.
